Re: [PATCH v3 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp

[Igor Opaniuk <igor.opaniuk@foundries.io>]

Hi,

On Wed, Sep 8, 2021 at 9:56 PM Oleksandr Suvorov
<oleksandr.suvorov@foundries.io> wrote:
>
> From: Jorge Ramirez-Ortiz <jorge@foundries.io>
>
> Import data for eSDHC driver for SoC iMX7ULP from the Linux kernel.
> Set supported by u-boot flags only.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
> Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
>
> Changes in v3:
> - add a Reviewed-by record
>
> Changes in v2:
> - add a Reviewed-by record
>
>  drivers/mmc/fsl_esdhc_imx.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
> index aabf39535f..6c8f77f9ee 100644
> --- a/drivers/mmc/fsl_esdhc_imx.c
> +++ b/drivers/mmc/fsl_esdhc_imx.c
> @@ -1706,6 +1706,11 @@ static struct esdhc_soc_data usdhc_imx7d_data = {
>                         | ESDHC_FLAG_HS400,
>  };
>
> +static struct esdhc_soc_data usdhc_imx7ulp_data = {
> +       .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
> +                       | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200,
> +};
> +
>  static struct esdhc_soc_data usdhc_imx8qm_data = {
>         .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING |
>                 ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 |
> @@ -1720,7 +1725,7 @@ static const struct udevice_id fsl_esdhc_ids[] = {
>         { .compatible = "fsl,imx6sl-usdhc", },
>         { .compatible = "fsl,imx6q-usdhc", },
>         { .compatible = "fsl,imx7d-usdhc", .data = (ulong)&usdhc_imx7d_data,},
> -       { .compatible = "fsl,imx7ulp-usdhc", },
> +       { .compatible = "fsl,imx7ulp-usdhc", .data = (ulong)&usdhc_imx7ulp_data,},
>         { .compatible = "fsl,imx8qm-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
>         { .compatible = "fsl,imx8mm-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
>         { .compatible = "fsl,imx8mn-usdhc", .data = (ulong)&usdhc_imx8qm_data,},
> --
> 2.31.1
>

Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk
Embedded Software Engineer
T:  +380 938364067
E: igor.opaniuk@foundries.io
W: www.foundries.io