All of lore.kernel.org
 help / color / mirror / Atom feed
From: dillon min <dillon.minfei@gmail.com>
To: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	p.zabel@pengutronix.de, pierre-yves.mordret@st.com,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-i2c@vger.kernel.org,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>
Subject: Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board
Date: Mon, 15 Jun 2020 18:06:50 +0800	[thread overview]
Message-ID: <CAL9mu0JsCOrnt=ROr-0_GByKeb6yeq5YwygzS+S9i=SMjgL6kQ@mail.gmail.com> (raw)
In-Reply-To: <618d3fea-aa9f-dbf6-04a1-e9db621a6cd5@st.com>

On Mon, Jun 15, 2020 at 5:08 PM Alexandre Torgue
<alexandre.torgue@st.com> wrote:
>
> Hi Dillon
>
> On 6/9/20 3:26 PM, dillon.minfei@gmail.com wrote:
> > From: dillon min <dillon.minfei@gmail.com>
> >
> > This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
> > board with three dts and one i2c driver changes.
> >
> > has been validated by ts_print tool
> >
> > Changes log:
> > V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> >
> > V3: just add change log in [PATCH V3 3/4] below ---
> >
> > V2: remove id, blocks, irq-trigger from stmpe811 dts
> >
> > V1:
> > ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> > ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> > ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> > dillon min (4):
> >    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> >    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> >    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> >    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> >   arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
> >   arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
> >   arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
> >   drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
> >   4 files changed, 80 insertions(+), 3 deletions(-)
> >
>
> DT patches applied on stm32-next. I changed node ordering in patch 3.
Okay, thanks.

Regards,
Dillon,
>
> Thanks
> Alex

WARNING: multiple messages have this Message-ID (diff)
From: dillon min <dillon.minfei@gmail.com>
To: Alexandre Torgue <alexandre.torgue@st.com>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	pierre-yves.mordret@st.com,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-i2c@vger.kernel.org, p.zabel@pengutronix.de,
	linux-stm32@st-md-mailman.stormreply.com,
	Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board
Date: Mon, 15 Jun 2020 18:06:50 +0800	[thread overview]
Message-ID: <CAL9mu0JsCOrnt=ROr-0_GByKeb6yeq5YwygzS+S9i=SMjgL6kQ@mail.gmail.com> (raw)
In-Reply-To: <618d3fea-aa9f-dbf6-04a1-e9db621a6cd5@st.com>

On Mon, Jun 15, 2020 at 5:08 PM Alexandre Torgue
<alexandre.torgue@st.com> wrote:
>
> Hi Dillon
>
> On 6/9/20 3:26 PM, dillon.minfei@gmail.com wrote:
> > From: dillon min <dillon.minfei@gmail.com>
> >
> > This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
> > board with three dts and one i2c driver changes.
> >
> > has been validated by ts_print tool
> >
> > Changes log:
> > V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> >
> > V3: just add change log in [PATCH V3 3/4] below ---
> >
> > V2: remove id, blocks, irq-trigger from stmpe811 dts
> >
> > V1:
> > ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> > ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> > ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> > dillon min (4):
> >    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> >    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> >    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> >    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> >   arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
> >   arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
> >   arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
> >   drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
> >   4 files changed, 80 insertions(+), 3 deletions(-)
> >
>
> DT patches applied on stm32-next. I changed node ordering in patch 3.
Okay, thanks.

Regards,
Dillon,
>
> Thanks
> Alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-06-15 10:07 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-09 13:26 [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board dillon.minfei
2020-06-09 13:26 ` dillon.minfei
2020-06-09 13:26 ` [PATCH v4 1/4] ARM: dts: stm32: add I2C3 support on STM32F429 SoC dillon.minfei
2020-06-09 13:26   ` dillon.minfei
2020-06-09 13:26 ` [PATCH v4 2/4] ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 dillon.minfei
2020-06-09 13:26   ` dillon.minfei
2020-06-09 13:26 ` [PATCH v4 3/4] ARM: dts: stm32: enable stmpe811 on stm32429-disco board dillon.minfei
2020-06-09 13:26   ` dillon.minfei
2020-06-09 13:26 ` [PATCH v4 4/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue dillon.minfei
2020-06-09 13:26   ` dillon.minfei
2021-03-15 12:43   ` dillon min
2021-03-15 12:43     ` dillon min
2021-03-15 13:00     ` Wolfram Sang
2021-03-15 13:00       ` Wolfram Sang
2021-05-07  2:54       ` dillon min
2021-05-07  2:54         ` dillon min
2021-05-07 12:29         ` [Linux-stm32] " Patrice CHOTARD
2021-05-07 12:29           ` Patrice CHOTARD
2021-05-07 12:47           ` dillon min
2021-05-07 12:47             ` dillon min
2020-06-15  9:08 ` [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board Alexandre Torgue
2020-06-15  9:08   ` Alexandre Torgue
2020-06-15 10:06   ` dillon min [this message]
2020-06-15 10:06     ` dillon min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAL9mu0JsCOrnt=ROr-0_GByKeb6yeq5YwygzS+S9i=SMjgL6kQ@mail.gmail.com' \
    --to=dillon.minfei@gmail.com \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=philippe.schenker@toradex.com \
    --cc=pierre-yves.mordret@st.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.