All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Stultz <john.stultz@linaro.org>
To: Ryan Grachek <ryan@edited.us>, Wei Xu <xuwei5@hisilicon.com>,
	Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	YongQin Liu <yongqin.liu@linaro.org>,
	lkml <linux-kernel@vger.kernel.org>
Subject: REGRESSION: HiKey eMMC corruption
Date: Fri, 18 May 2018 15:59:57 -0700	[thread overview]
Message-ID: <CALAqxLX5qPq_5CQwubzk5hiL3kkes7nK9NGqtnyddXKfyaJKTg@mail.gmail.com> (raw)

The last few months have been busy and I've not been ontop of my
upstream testing as well as I'd like, but today I did manage to chase
down an issue I've been seeing since 4.17-rc1 on the HiKey board,
which was causing emmc corruption and stopping the board from booting.

Symptoms usually looked like:
[    1.690448] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
...
[    1.777288] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[    1.777760] mmc0: new HS200 MMC card at address 0001
...
[   12.214381] dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
[   12.457420] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.536676] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   12.616827] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.695742] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   12.772067] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.850429] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   12.863384] print_req_error: I/O error, dev mmcblk0, sector 8810504
[   12.869778] Aborting journal on device mmcblk0p10-8.
[   12.887900] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   12.967509] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.130182] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   13.209438] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.302085] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   13.380462] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.494539] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot
req 400000Hz, actual 400000HZ div = 31)
[   13.571420] mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot
req 150000000Hz, actual 148800000HZ div = 0)
[   13.640817] EXT4-fs error (device mmcblk0p10):
ext4_journal_check_start:61: Detected aborted journal
[   13.650043] EXT4-fs (mmcblk0p10): Remounting filesystem read-only

And quite often this would result in a disk that wouldn't properly
boot even with older kernels.

I've narrowed the issue down to the following change:
abd7d0972a192 ("arm64: dts: hikey: Enable HS200 mode on eMMC")

Reverting this change seems to make things work reliably for me.

Should we revert that upstream for now?

thanks
-john

             reply	other threads:[~2018-05-18 23:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 22:59 John Stultz [this message]
2018-05-21  8:34 ` REGRESSION: HiKey eMMC corruption Wei Xu
2018-05-21  9:03   ` Leo Yan
2018-05-21 17:14     ` John Stultz
2018-05-21 19:09   ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALAqxLX5qPq_5CQwubzk5hiL3kkes7nK9NGqtnyddXKfyaJKTg@mail.gmail.com \
    --to=john.stultz@linaro.org \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ryan@edited.us \
    --cc=ulf.hansson@linaro.org \
    --cc=xuwei5@hisilicon.com \
    --cc=yongqin.liu@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.