From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753029AbdJSUGw (ORCPT ); Thu, 19 Oct 2017 16:06:52 -0400 Received: from mail-wr0-f174.google.com ([209.85.128.174]:47826 "EHLO mail-wr0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752474AbdJSUGu (ORCPT ); Thu, 19 Oct 2017 16:06:50 -0400 X-Google-Smtp-Source: ABhQp+RMgwt3bsnDXCaFYlAMkNVKSeDjdRav5dAPy7sRKiF8xBqck1BKEynxk9Om58/0DiUdF/cL7hoeLpBs/G+jZ/4= MIME-Version: 1.0 In-Reply-To: <410670D7E743164D87FA6160E7907A560113A2ECC2@am04wembxa.internal.synopsys.com> References: <1505937448-13475-1-git-send-email-john.stultz@linaro.org> <2B3535C5ECE8B5419E3ECBE3007729090269FF70AC@US01WEMBX2.internal.synopsys.com> <410670D7E743164D87FA6160E7907A560113A21CDB@am04wembxa.internal.synopsys.com> <410670D7E743164D87FA6160E7907A560113A2C8E9@am04wembxa.internal.synopsys.com> <410670D7E743164D87FA6160E7907A560113A2E38F@am04wembxa.internal.synopsys.com> <410670D7E743164D87FA6160E7907A560113A2ECC2@am04wembxa.internal.synopsys.com> From: John Stultz Date: Thu, 19 Oct 2017 13:06:48 -0700 Message-ID: Subject: Re: [RESEND x2][PATCH 0/3] dwc2 fixes for edge cases on hikey To: Minas Harutyunyan Cc: John Youn , lkml , Wei Xu , Guodong Xu , Amit Pundir , YongQin Liu , Douglas Anderson , Chen Yu , Felipe Balbi , Greg Kroah-Hartman , "linux-usb@vger.kernel.org" Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by nfs id v9JK6vtf009763 On Tue, Oct 17, 2017 at 1:41 AM, Minas Harutyunyan wrote: > On 10/17/2017 1:34 AM, John Stultz wrote: >> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan >> wrote: >>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt. >>> According previously sent by you register dump (GHWCFG2 = 0x23affc70) >>> your core OTG_MODE=0. >>> Bellow fragment from programming guide on Device disconnect: >>> >>> "7.3Device Disconnection >>> The device session ends when the USB cable is disconnected or if the >>> VBUS is switched off by the Host. The >>> device disconnect flow varies depending on the value of the OTG_MODE >>> configuration parameter. >>> >>> When OTG_MODE = 0,1, or 3 >>> When OTG_MODE is set to 0,1, or 3, the device disconnect flow is as follows: >>> 1. When the USB cable is unplugged or when the VBUS is switched off by >>> the Host, the Device core >>> trigger GINTSTS.OTGInt [bit 2] interrupt bit. >>> 2. When the device application detects GINTSTS.OTGInt interrupt, it >>> checks that the >>> GOTGINT.SesEndDet (Session End Detected) bit is set to 1’b1." >>> >>> So, you should receive and handle "Session End Detected". In function >>> dwc2_handle_otg_intr() on this interrupt (in device mode) calling >>> dwc2_hsotg_disconnect() function. By adding your patch "[PATCH 3/3] usb: >>> dwc2: Fix UDC state tracking" state changed to not attached as required. >> >> >> So, on the HiKey board (using 4.14-rc5 + Vardan's patch), I'm not >> seeing the GOTGINT_SES_END_DET in dwc2_handle_otg_intr() when I remove >> the USB OTG cable. >> >> In fact, I'm not seeing any calls to dwc2_handle_otg_intr()... which >> seems... odd maybe? Any clues as to what might be going wrong then? >> >> thanks >> -john >> > Hi John Stultz, > So, on Hikey board on unplug B connector GOTGINT.SesEndDet interrupt not > asserted, instead asserted GINTSTS_CONIDSTSCHNG. Please, confirm. Correct. On B unplug, I see: dwc2_handle_conn_id_status_change_intr: ++Connector ID Status Change Interrupt++ (Host) And I never see any calls to dwc2_handle_otg_intr(). > In this case without your patch "[PATCH 1/3] usb: dwc2: Improve gadget > state disconnection handling" but by applying your patch "[PATCH 3/3] > usb: dwc2: Fix UDC state tracking": > 1. On B plug connect UDC state will be set to "configured" > 2. On B plug disconnect - "not attached". > Is it Ok for you? So this is what I expect, but I don't see it. Since without my patch, nothing seems to call disconenct when the B plug is disconnected, I still see: # cat /sys/class/udc/f72c0000.usb/state configured thanks -john