All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Chengwen Feng <fengchengwen@huawei.com>
Cc: "Thomas Monjalon" <thomas@monjalon.net>,
	"Ferruh Yigit" <ferruh.yigit@intel.com>,
	"Richardson, Bruce" <bruce.richardson@intel.com>,
	"Jerin Jacob" <jerinj@marvell.com>,
	"Andrew Rybchenko" <andrew.rybchenko@oktetlabs.ru>,
	dpdk-dev <dev@dpdk.org>,
	"Morten Brørup" <mb@smartsharesystems.com>,
	"Nipun Gupta" <nipun.gupta@nxp.com>,
	"Hemant Agrawal" <hemant.agrawal@nxp.com>,
	"Maxime Coquelin" <maxime.coquelin@redhat.com>,
	"Honnappa Nagarahalli" <honnappa.nagarahalli@arm.com>,
	"David Marchand" <david.marchand@redhat.com>,
	"Satananda Burla" <sburla@marvell.com>,
	"Prasun Kapoor" <pkapoor@marvell.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>
Subject: Re: [dpdk-dev] [PATCH v6] dmadev: introduce DMA device library
Date: Mon, 19 Jul 2021 11:51:08 +0530	[thread overview]
Message-ID: <CALBAE1MHV+7Rbs07CxnRb2Qh+bK60L9ua8Ur0uxdDTpUAf-zcA@mail.gmail.com> (raw)
In-Reply-To: <1626665358-48826-1-git-send-email-fengchengwen@huawei.com>

On Mon, Jul 19, 2021 at 9:02 AM Chengwen Feng <fengchengwen@huawei.com> wrote:
>
> This patch introduce 'dmadevice' which is a generic type of DMA
> device.
>
> The APIs of dmadev library exposes some generic operations which can
> enable configuration and I/O with the DMA devices.
>
> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>


The API specification aspects look pretty good to me.

Some minor comments are below. You can add my Acked by on future version
API header file where you will split the patch.


> diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
> new file mode 100644
> index 0000000..ecac281
> --- /dev/null
> +++ b/lib/dmadev/rte_dmadev.h
> @@ -0,0 +1,1025 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2021 HiSilicon Limited.
> + * Copyright(c) 2021 Intel Corporation.
> + * Copyright(c) 2021 Marvell International Ltd.
> + * Copyright(c) 2021 SmartShare Systems.
> + */
> +
> +#ifndef _RTE_DMADEV_H_
> +#define _RTE_DMADEV_H_
> +
> +/**
> + * @file rte_dmadev.h
> + *
> + * RTE DMA (Direct Memory Access) device APIs.
> + *
> + * The DMA framework is built on the following model:
> + *
> + *     ---------------   ---------------       ---------------
> + *     | virtual DMA |   | virtual DMA |       | virtual DMA |
> + *     | channel     |   | channel     |       | channel     |
> + *     ---------------   ---------------       ---------------
> + *            |                |                      |
> + *            ------------------                      |
> + *                     |                              |
> + *               ------------                    ------------
> + *               |  dmadev  |                    |  dmadev  |
> + *               ------------                    ------------
> + *                     |                              |
> + *            ------------------               ------------------
> + *            | HW-DMA-channel |               | HW-DMA-channel |
> + *            ------------------               ------------------
> + *                     |                              |
> + *                     --------------------------------
> + *                                     |
> + *                           ---------------------
> + *                           | HW-DMA-Controller |
> + *                           ---------------------
> + *
> + * The DMA controller could have multiple HW-DMA-channels (aka. HW-DMA-queues),
> + * each HW-DMA-channel should be represented by a dmadev.
> + *
> + * The dmadev could create multiple virtual DMA channels, each virtual DMA
> + * channel represents a different transfer context. The DMA operation request
> + * must be submitted to the virtual DMA channel. e.g. Application could create
> + * virtual DMA channel 0 for memory-to-memory transfer scenario, and create
> + * virtual DMA channel 1 for memory-to-device transfer scenario.
> + *
> + * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the
> + * PCI/SoC device probing phase performed at EAL initialization time. And could
> + * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing
> + * phase.
> + *
> + * This framework uses 'uint16_t dev_id' as the device identifier of a dmadev,
> + * and 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev.
> + *
> + * The functions exported by the dmadev API to setup a device designated by its
> + * device identifier must be invoked in the following order:
> + *     - rte_dmadev_configure()
> + *     - rte_dmadev_vchan_setup()
> + *     - rte_dmadev_start()
> + *
> + * Then, the application can invoke dataplane APIs to process jobs.
> + *
> + * If the application wants to change the configuration (i.e. invoke
> + * rte_dmadev_configure() or rte_dmadev_vchan_setup()), it must invoke
> + * rte_dmadev_stop() first to stop the device and then do the reconfiguration
> + * before invoking rte_dmadev_start() again. The dataplane APIs should not be
> + * invoked when the device is stopped.
> + *
> + * Finally, an application can close a dmadev by invoking the
> + * rte_dmadev_close() function.
> + *
> + * The dataplane APIs include two parts:
> + * The first part is the submission of operation requests:
> + *     - rte_dmadev_copy()
> + *     - rte_dmadev_copy_sg()
> + *     - rte_dmadev_fill()
> + *     - rte_dmadev_submit()
> + *
> + * These APIs could work with different virtual DMA channels which have
> + * different contexts.
> + *
> + * The first three APIs are used to submit the operation request to the virtual
> + * DMA channel, if the submission is successful, a uint16_t ring_idx is
> + * returned, otherwise a negative number is returned.
> + *
> + * The last API was used to issue doorbell to hardware, and also there are flags
> + * (@see RTE_DMA_OP_FLAG_SUBMIT) parameter of the first three APIs could do the
> + * same work.
> + *
> + * The second part is to obtain the result of requests:
> + *     - rte_dmadev_completed()
> + *         - return the number of operation requests completed successfully.
> + *     - rte_dmadev_completed_status()
> + *         - return the number of operation requests completed.
> + *
> + * @note If the dmadev works in silent mode, application does not invoke the

in slient mode (@see RTE_DMA_DEV_CAPA_SILENT)

> + * above two completed APIs.
> + *
> + * About the ring_idx which enqueue APIs (e.g. rte_dmadev_copy()
> + * rte_dmadev_fill()) returned, the rules are as follows:
> + *     - ring_idx for each virtual DMA channel are independent.
> + *     - For a virtual DMA channel, the ring_idx is monotonically incremented,
> + *       when it reach UINT16_MAX, it wraps back to zero.
> + *     - This ring_idx can be used by applications to track per-operation
> + *       metadata in an application-defined circular ring.
> + *     - The initial ring_idx of a virtual DMA channel is zero, after the
> + *       device is stopped, the ring_idx needs to be reset to zero.
> + *
> + * One example:
> + *     - step-1: start one dmadev
> + *     - step-2: enqueue a copy operation, the ring_idx return is 0
> + *     - step-3: enqueue a copy operation again, the ring_idx return is 1
> + *     - ...
> + *     - step-101: stop the dmadev
> + *     - step-102: start the dmadev
> + *     - step-103: enqueue a copy operation, the cookie return is 0
> + *     - ...
> + *     - step-x+0: enqueue a fill operation, the ring_idx return is 65535
> + *     - step-x+1: enqueue a copy operation, the ring_idx return is 0
> + *     - ...
> + *
> + * The DMA operation address used in enqueue APIs (i.e. rte_dmadev_copy(),
> + * rte_dmadev_copy_sg(), rte_dmadev_fill()) defined as rte_iova_t type. The
> + * dmadev supports two types of address: memory address and device address.
> + *
> + * - memory address: the source and destination address of the memory-to-memory
> + * transfer type, or the source address of the memory-to-device transfer type,
> + * or the destination address of the device-to-memory transfer type.
> + * @note If the device support SVA, the memory address can be any VA address,

If the device supports SVA (@see RTE_DMA_DEV_CAPA_SVA)

> + * otherwise it must be an IOVA address.
> + *
> + * - device address: the source and destination address of the device-to-device
> + * transfer type, or the source address of the device-to-memory transfer type,
> + * or the destination address of the memory-to-device transfer type.
> + *
> + * By default, all the functions of the dmadev API exported by a PMD are
> + * lock-free functions which assume to not be invoked in parallel on different
> + * logical cores to work on the same target dmadev object.
> + * @note Different virtual DMA channels on the same dmadev *DO NOT* support
> + * parallel invocation because there virtual DMA channels share the same

their?

> + * HW-DMA-channel.
> + *
> + */
> +
> +#include <rte_common.h>
> +#include <rte_compat.h>
> +#include <rte_dev.h>
> +#include <rte_errno.h>
> +#include <rte_memory.h>
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +#define RTE_DMADEV_NAME_MAX_LEN        RTE_DEV_NAME_MAX_LEN
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * @param dev_id
> + *   DMA device index.
> + *
> + * @return
> + *   - If the device index is valid (true) or not (false).
> + */
> +__rte_experimental
> +bool
> +rte_dmadev_is_valid_dev(uint16_t dev_id);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Get the total number of DMA devices that have been successfully
> + * initialised.
> + *
> + * @return
> + *   The total number of usable DMA devices.
> + */
> +__rte_experimental
> +uint16_t
> +rte_dmadev_count(void);
> +
> +/* Enumerates DMA device capabilities. */
> +#define RTE_DMA_DEV_CAPA_MEM_TO_MEM    (1ull << 0)
> +/**< DMA device support memory-to-memory transfer.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + */
> +
> +#define RTE_DMA_DEV_CAPA_MEM_TO_DEV    (1ull << 1)
> +/**< DMA device support memory-to-device transfer.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + * @see struct rte_dmadev_port_param::port_type
> + */
> +
> +#define RTE_DMA_DEV_CAPA_DEV_TO_MEM    (1ull << 2)
> +/**< DMA device support device-to-memory transfer.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + * @see struct rte_dmadev_port_param::port_type
> + */
> +
> +#define RTE_DMA_DEV_CAPA_DEV_TO_DEV    (1ull << 3)
> +/**< DMA device support device-to-device transfer.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + * @see struct rte_dmadev_port_param::port_type
> + */
> +
> +#define RTE_DMA_DEV_CAPA_SVA           (1ull << 4)
> +/**< DMA device support SVA which could use VA as DMA address.
> + * If device support SVA then application could pass any VA address like memory
> + * from rte_malloc(), rte_memzone(), malloc, stack memory.
> + * If device don't support SVA, then application should pass IOVA address which
> + * from rte_malloc(), rte_memzone().
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + */
> +
> +#define RTE_DMA_DEV_CAPA_SILENT                (1ull << 5)
> +/**< DMA device support work in silent mode.
> + * In this mode, application don't required to invoke rte_dmadev_completed*()
> + * API.
> + *
> + * @see struct rte_dmadev_conf::silent_mode
> + */
> +
> +#define RTE_DMA_DEV_CAPA_OPS_COPY      (1ull << 32)
> +/**< DMA device support copy ops.
> + * This capability start with index of 32, so that it could leave gap between
> + * normal capability and ops capability.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + */
> +
> +#define RTE_DMA_DEV_CAPA_OPS_COPY_SG   (1ull << 33)
> +/**< DMA device support scatter-list copy ops.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + */
> +
> +#define RTE_DMA_DEV_CAPA_OPS_FILL      (1ull << 34)
> +/**< DMA device support fill ops.
> + *
> + * @see struct rte_dmadev_info::dev_capa
> + */
> +
> +/**
> + * A structure used to retrieve the information of a DMA device.
> + */
> +struct rte_dmadev_info {
> +       struct rte_device *device; /**< Generic Device information. */
> +       uint64_t dev_capa; /**< Device capabilities (RTE_DMA_DEV_CAPA_*). */
> +       uint16_t max_vchans;
> +       /**< Maximum number of virtual DMA channels supported. */
> +       uint16_t max_desc;
> +       /**< Maximum allowed number of virtual DMA channel descriptors. */
> +       uint16_t min_desc;
> +       /**< Minimum allowed number of virtual DMA channel descriptors. */
> +       uint16_t nb_vchans; /**< Number of virtual DMA channel configured. */
> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Retrieve information of a DMA device.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param[out] dev_info
> + *   A pointer to a structure of type *rte_dmadev_info* to be filled with the
> + *   information of the device.
> + *
> + * @return
> + *   - =0: Success, driver updates the information of the DMA device.
> + *   - <0: Error code returned by the driver info get function.
> + *
> + */
> +__rte_experimental
> +int
> +rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info);
> +
> +/**
> + * A structure used to configure a DMA device.
> + */
> +struct rte_dmadev_conf {
> +       uint16_t max_vchans;
> +       /**< Maximum number of virtual DMA channel to use.
> +        * This value cannot be greater than the field 'max_vchans' of struct
> +        * rte_dmadev_info which get from rte_dmadev_info_get().
> +        */
> +       uint8_t silent_mode;

bool instead of uint8_t?

> +       /**< Indicates whether to work in silent mode.
> +        * 0-default mode, 1-silent mode.
> +        *
> +        * @see RTE_DMA_DEV_CAPA_SILENT
> +        */
> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Configure a DMA device.
> + *
> + * This function must be invoked first before any other function in the
> + * API. This function can also be re-invoked when a device is in the
> + * stopped state.
> + *
> + * @param dev_id
> + *   The identifier of the device to configure.
> + * @param dev_conf
> + *   The DMA device configuration structure encapsulated into rte_dmadev_conf
> + *   object.
> + *
> + * @return
> + *   - =0: Success, device configured.
> + *   - <0: Error code returned by the driver configuration function.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start a DMA device.
> + *
> + * The device start step is the last one and consists of setting the DMA
> + * to start accepting jobs.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + *
> + * @return
> + *   - =0: Success, device started.
> + *   - <0: Error code returned by the driver start function.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_start(uint16_t dev_id);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Stop a DMA device.
> + *
> + * The device can be restarted with a call to rte_dmadev_start().
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + *
> + * @return
> + *   - =0: Success, device stopped.
> + *   - <0: Error code returned by the driver stop function.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_stop(uint16_t dev_id);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Close a DMA device.
> + *
> + * The device cannot be restarted after this call.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + *
> + * @return
> + *  - =0: Successfully close device
> + *  - <0: Failure to close device
> + */
> +__rte_experimental
> +int
> +rte_dmadev_close(uint16_t dev_id);
> +
> +/**
> + * rte_dma_direction - DMA transfer direction defines.
> + */
> +enum rte_dma_direction {
> +       RTE_DMA_DIR_MEM_TO_MEM = 0,

No need to give = 0 as it starts with 0.

> +       /**< DMA transfer direction - from memory to memory.
> +        *
> +        * @see struct rte_dmadev_vchan_conf::direction
> +        */
> +       RTE_DMA_DIR_MEM_TO_DEV = 1,

No need to give = 1.

> +       /**< DMA transfer direction - from memory to device.
> +        * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs

We can remove ARM. It can be RISC-V too. ;-)


> +        * through the PCIE interface. In this case, the ARM SoCs works in

PCIe

> +        * EP(endpoint) mode, it could initiate a DMA move request from memory
> +        * (which is ARM memory) to device (which is x86 host memory).

to the device.

> +        *
> +        * @see struct rte_dmadev_vchan_conf::direction
> +        */
> +       RTE_DMA_DIR_DEV_TO_MEM = 2,
> +       /**< DMA transfer direction - from device to memory.
> +        * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs
> +        * through the PCIE interface. In this case, the ARM SoCs works in
> +        * EP(endpoint) mode, it could initiate a DMA move request from device
> +        * (which is x86 host memory) to memory (which is ARM memory).
> +        *
> +        * @see struct rte_dmadev_vchan_conf::direction
> +        */
> +       RTE_DMA_DIR_DEV_TO_DEV = 3,
> +       /**< DMA transfer direction - from device to device.
> +        * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs
> +        * through the PCIE interface. In this case, the ARM SoCs works in
> +        * EP(endpoint) mode, it could initiate a DMA move request from device
> +        * (which is x86 host memory) to device (which is another x86 host
> +        * memory).
> +        *
> +        * @see struct rte_dmadev_vchan_conf::direction
> +        */
> +       RTE_DMA_DIR_BUTT

# Doxygen comment is missing
# Typically we use RTE_DMA_DIR_MAX.
# If there is no real need for this please remove this as it can break
ABI if we add more
items.


> +};
> +
> +/**
> + * enum rte_dmadev_port_type - DMA access port type defines.
> + *
> + * @see struct rte_dmadev_port_param::port_type
> + */
> +enum rte_dmadev_port_type {
> +       RTE_DMADEV_PORT_NONE = 0,

No need for = 0

> +       RTE_DMADEV_PORT_PCIE, /**< The DMA access port is PCIE. */
> +       RTE_DMADEV_PORT_BUTT


Same as the above comment for RTE_DMA_DIR_BUTT

> +};
> +
> +/**
> + * A structure used to descript DMA access port parameters.
> + *
> + * @see struct rte_dmadev_vchan_conf::src_port
> + * @see struct rte_dmadev_vchan_conf::dst_port
> + */
> +struct rte_dmadev_port_param {
> +       enum rte_dmadev_port_type port_type;
> +       /**< The device access port type.
> +        * @see enum rte_dmadev_port_type
> +        */
> +       union {
> +               /** PCIE access port parameter.
> +                *
> +                * The following model shows SoC's PCIE module connects to
> +                * multiple PCIE hosts and multiple endpoints. The PCIE module
> +                * has an integrate DMA controller.
> +                * If the DMA wants to access the memory of host A, it can be
> +                * initiated by PF1 in core0, or by VF0 of PF0 in core0.
> +                *
> +                * System Bus
> +                *    |     ----------PCIE module----------
> +                *    |     Bus
> +                *    |     Interface
> +                *    |     -----        ------------------
> +                *    |     |   |        | PCIE Core0     |
> +                *    |     |   |        |                |        -----------
> +                *    |     |   |        |   PF-0 -- VF-0 |        | Host A  |
> +                *    |     |   |--------|        |- VF-1 |--------| Root    |
> +                *    |     |   |        |   PF-1         |        | Complex |
> +                *    |     |   |        |   PF-2         |        -----------
> +                *    |     |   |        ------------------
> +                *    |     |   |
> +                *    |     |   |        ------------------
> +                *    |     |   |        | PCIE Core1     |
> +                *    |     |   |        |                |        -----------
> +                *    |     |   |        |   PF-0 -- VF-0 |        | Host B  |
> +                *    |-----|   |--------|   PF-1 -- VF-0 |--------| Root    |
> +                *    |     |   |        |        |- VF-1 |        | Complex |
> +                *    |     |   |        |   PF-2         |        -----------
> +                *    |     |   |        ------------------
> +                *    |     |   |
> +                *    |     |   |        ------------------
> +                *    |     |DMA|        |                |        ------
> +                *    |     |   |        |                |--------| EP |
> +                *    |     |   |--------| PCIE Core2     |        ------
> +                *    |     |   |        |                |        ------
> +                *    |     |   |        |                |--------| EP |
> +                *    |     |   |        |                |        ------
> +                *    |     -----        ------------------


This diagram does not show correctly in doxygen. Please fix it.

> +                *
> +                * The following structure is used to describe the above access
> +                * port.
> +                *
> +                * @note If some fields can not be supported by the
> +                * hardware/driver, then the driver ignores those fields.
> +                * Please check driver-specific documentation for limitations
> +                * and capablites.
> +                */
> +               struct {
> +                       uint64_t coreid : 4; /**< PCIE core id used. */
> +                       uint64_t pfid : 8; /**< PF id used. */
> +                       uint64_t vfen : 1; /**< VF enable bit. */
> +                       uint64_t vfid : 16; /**< VF id used. */
> +                       uint64_t pasid : 20;
> +                       /**< The pasid filed in TLP packet. */
> +                       uint64_t attr : 3;
> +                       /**< The attributes filed in TLP packet. */
> +                       uint64_t ph : 2;
> +                       /**< The processing hint filed in TLP packet. */
> +                       uint64_t st : 16;
> +                       /**< The steering tag filed in TLP packet. */
> +               } pcie;
> +       };
> +       uint64_t reserved[2]; /**< Reserved for future fields. */
> +};
> +
> +/**
> + * A structure used to configure a virtual DMA channel.
> + */
> +struct rte_dmadev_vchan_conf {
> +       enum rte_dma_direction direction;
> +       /**< Transfer direction
> +        * @see enum rte_dma_direction
> +        */
> +       uint16_t nb_desc;
> +       /**< Number of descriptor for the virtual DMA channel */
> +       struct rte_dmadev_port_param src_port;
> +       /**< 1) Used to describes the device access port parameter in the
> +        * device-to-memory transfer scenario.
> +        * 2) Used to describes the source device access port parameter in the
> +        * device-to-device transfer scenario.
> +        * @see struct rte_dmadev_port_param
> +        */
> +       struct rte_dmadev_port_param dst_port;
> +       /**< 1) Used to describes the device access port parameter in the
> +        * memory-to-device transfer scenario.
> +        * 2) Used to describes the destination device access port parameter in
> +        * the device-to-device transfer scenario.
> +        * @see struct rte_dmadev_port_param
> +        */
> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Allocate and set up a virtual DMA channel.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param conf
> + *   The virtual DMA channel configuration structure encapsulated into
> + *   rte_dmadev_vchan_conf object.
> + *
> + * @return
> + *   - >=0: Allocate success, it is the virtual DMA channel id. This value must
> + *          be less than the field 'max_vchans' of struct rte_dmadev_conf
> + *          which configured by rte_dmadev_configure().
> + *   - <0: Error code returned by the driver virtual channel setup function.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_vchan_setup(uint16_t dev_id,
> +                      const struct rte_dmadev_vchan_conf *conf);
> +
> +/**
> + * rte_dmadev_stats - running statistics.
> + */
> +struct rte_dmadev_stats {
> +       uint64_t submitted_count;
> +       /**< Count of operations which were submitted to hardware. */
> +       uint64_t completed_fail_count;
> +       /**< Count of operations which failed to complete. */
> +       uint64_t completed_count;
> +       /**< Count of operations which successfully complete. */
> +};
> +
> +#define RTE_DMADEV_ALL_VCHAN   0xFFFFu
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Retrieve basic statistics of a or all virtual DMA channel(s).
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + *   If equal RTE_DMADEV_ALL_VCHAN means all channels.
> + * @param[out] stats
> + *   The basic statistics structure encapsulated into rte_dmadev_stats
> + *   object.
> + *
> + * @return
> + *   - =0: Successfully retrieve stats.
> + *   - <0: Failure to retrieve stats.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_stats_get(uint16_t dev_id, uint16_t vchan,
> +                    struct rte_dmadev_stats *stats);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Reset basic statistics of a or all virtual DMA channel(s).
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + *   If equal RTE_DMADEV_ALL_VCHAN means all channels.
> + *
> + * @return
> + *   - =0: Successfully reset stats.
> + *   - <0: Failure to reset stats.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_stats_reset(uint16_t dev_id, uint16_t vchan);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Dump DMA device info.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param f
> + *   The file to write the output to.
> + *
> + * @return
> + *   0 on success. Non-zero otherwise.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_dump(uint16_t dev_id, FILE *f);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Trigger the dmadev self test.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + *
> + * @return
> + *   - 0: Selftest successful.
> + *   - -ENOTSUP if the device doesn't support selftest
> + *   - other values < 0 on failure.
> + */
> +__rte_experimental
> +int
> +rte_dmadev_selftest(uint16_t dev_id);
> +
> +/**
> + * rte_dma_status_code - DMA transfer result status code defines.
> + */
> +enum rte_dma_status_code {
> +       RTE_DMA_STATUS_SUCCESSFUL = 0,

No need for = 0

> +       /**< The operation completed successfully. */
> +       RTE_DMA_STATUS_USRER_ABORT,
> +       /**< The operation failed to complete due abort by user.
> +        * This is mainly used when processing dev_stop, user could modidy the
> +        * descriptors (e.g. change one bit to tell hardware abort this job),
> +        * it allows outstanding requests to be complete as much as possible,
> +        * so reduce the time to stop the device.
> +        */
> +       RTE_DMA_STATUS_NOT_ATTEMPTED,
> +       /**< The operation failed to complete due to following scenarios:
> +        * The jobs in a particular batch are not attempted because they
> +        * appeared after a fence where a previous job failed. In some HW
> +        * implementation it's possible for jobs from later batches would be
> +        * completed, though, so report the status from the not attempted jobs
> +        * before reporting those newer completed jobs.
> +        */
> +       RTE_DMA_STATUS_INVALID_SRC_ADDR,
> +       /**< The operation failed to complete due invalid source address. */
> +       RTE_DMA_STATUS_INVALID_DST_ADDR,
> +       /**< The operation failed to complete due invalid destination
> +        * address.
> +        */
> +       RTE_DMA_STATUS_INVALID_LENGTH,
> +       /**< The operation failed to complete due invalid length. */
> +       RTE_DMA_STATUS_INVALID_OPCODE,
> +       /**< The operation failed to complete due invalid opcode.
> +        * The DMA descriptor could have multiple format, which are
> +        * distinguished by the opcode field.
> +        */
> +       RTE_DMA_STATUS_BUS_ERROR,
> +       /**< The operation failed to complete due bus err. */
> +       RTE_DMA_STATUS_DATA_POISION,
> +       /**< The operation failed to complete due data poison. */
> +       RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR,
> +       /**< The operation failed to complete due descriptor read error. */
> +       RTE_DMA_STATUS_DEV_LINK_ERROR,
> +       /**< The operation failed to complete due device link error.
> +        * Used to indicates that the link error in the memory-to-device/
> +        * device-to-memory/device-to-device transfer scenario.
> +        */
> +       RTE_DMA_STATUS_UNKNOWN = 0x100,
> +       /**< The operation failed to complete due unknown reason.
> +        * The initial value is 256, which reserves space for future errors.
> +        */
> +};
> +
> +/**
> + * rte_dmadev_sge - can hold scatter DMA operation request entry.
> + */
> +struct rte_dmadev_sge {
> +       rte_iova_t addr; /**< The DMA operation address. */
> +       uint32_t length; /**< The DMA operation length. */
> +};
> +
> +#include "rte_dmadev_core.h"
> +
> +/* DMA flags to augment operation preparation. */
> +#define RTE_DMA_OP_FLAG_FENCE  (1ull << 0)
> +/**< DMA fence flag.
> + * It means the operation with this flag must be processed only after all
> + * previous operations are completed.
> + * If the specify DMA HW works in-order (it means it has default fence between
> + * operations), this flag could be NOP.
> + *
> + * @see rte_dmadev_copy()
> + * @see rte_dmadev_copy_sg()
> + * @see rte_dmadev_fill()
> + */
> +
> +#define RTE_DMA_OP_FLAG_SUBMIT (1ull << 1)
> +/**< DMA submit flag.
> + * It means the operation with this flag must issue doorbell to hardware after
> + * enqueued jobs.
> + */
> +
> +#define RTE_DMA_OP_FLAG_LLC    (1ull << 2)
> +/**< DMA write data to low level cache hint.
> + * Used for performance optimization, this is just a hint, and there is no
> + * capability bit for this, driver should not return error if this flag was set.
> + */
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Enqueue a copy operation onto the virtual DMA channel.
> + *
> + * This queues up a copy operation to be performed by hardware, if the 'flags'
> + * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin
> + * this operation, otherwise do not trigger doorbell.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + * @param src
> + *   The address of the source buffer.
> + * @param dst
> + *   The address of the destination buffer.
> + * @param length
> + *   The length of the data to be copied.
> + * @param flags
> + *   An flags for this operation.
> + *   @see RTE_DMA_OP_FLAG_*
> + *
> + * @return
> + *   - 0..UINT16_MAX: index of enqueued copy job.
> + *   - <0: Error code returned by the driver copy function.
> + */
> +__rte_experimental
> +static inline int
> +rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst,
> +               uint32_t length, uint64_t flags)
> +{
> +       struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> +
> +#ifdef RTE_DMADEV_DEBUG
> +       if (!rte_dmadev_is_valid_dev(dev_id) ||
> +           vchan >= dev->data->dev_conf.max_vchans)
> +               return -EINVAL;
> +       RTE_FUNC_PTR_OR_ERR_RET(*dev->copy, -ENOTSUP);
> +#endif
> +
> +       return (*dev->copy)(dev, vchan, src, dst, length, flags);
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Enqueue a scatter list copy operation onto the virtual DMA channel.
> + *
> + * This queues up a scatter list copy operation to be performed by hardware, if
> + * the 'flags' parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell
> + * to begin this operation, otherwise do not trigger doorbell.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + * @param src
> + *   The pointer of source scatter entry array.
> + * @param dst
> + *   The pointer of destination scatter entry array.
> + * @param nb_src
> + *   The number of source scatter entry.
> + * @param nb_dst
> + *   The number of destination scatter entry.
> + * @param flags
> + *   An flags for this operation.
> + *   @see RTE_DMA_OP_FLAG_*
> + *
> + * @return
> + *   - 0..UINT16_MAX: index of enqueued copy scatterlist job.
> + *   - <0: Error code returned by the driver copy scatterlist function.
> + */
> +__rte_experimental
> +static inline int
> +rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, struct rte_dmadev_sge *src,
> +                  struct rte_dmadev_sge *dst, uint16_t nb_src, uint16_t nb_dst,
> +                  uint64_t flags)
> +{
> +       struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> +
> +#ifdef RTE_DMADEV_DEBUG
> +       if (!rte_dmadev_is_valid_dev(dev_id) ||
> +           vchan >= dev->data->dev_conf.max_vchans ||
> +           src == NULL || dst == NULL || nb_src == 0 || nb_dst == 0)
> +               return -EINVAL;
> +       RTE_FUNC_PTR_OR_ERR_RET(*dev->copy_sg, -ENOTSUP);
> +#endif
> +
> +       return (*dev->copy_sg)(dev, vchan, src, dst, nb_src, nb_dst, flags);
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Enqueue a fill operation onto the virtual DMA channel.
> + *
> + * This queues up a fill operation to be performed by hardware, if the 'flags'
> + * parameter contains RTE_DMA_OP_FLAG_SUBMIT then trigger doorbell to begin
> + * this operation, otherwise do not trigger doorbell.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + * @param pattern
> + *   The pattern to populate the destination buffer with.
> + * @param dst
> + *   The address of the destination buffer.
> + * @param length
> + *   The length of the destination buffer.
> + * @param flags
> + *   An flags for this operation.
> + *   @see RTE_DMA_OP_FLAG_*
> + *
> + * @return
> + *   - 0..UINT16_MAX: index of enqueued fill job.
> + *   - <0: Error code returned by the driver fill function.
> + */
> +__rte_experimental
> +static inline int
> +rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern,
> +               rte_iova_t dst, uint32_t length, uint64_t flags)
> +{
> +       struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> +
> +#ifdef RTE_DMADEV_DEBUG
> +       if (!rte_dmadev_is_valid_dev(dev_id) ||
> +           vchan >= dev->data->dev_conf.max_vchans)
> +               return -EINVAL;
> +       RTE_FUNC_PTR_OR_ERR_RET(*dev->fill, -ENOTSUP);
> +#endif
> +
> +       return (*dev->fill)(dev, vchan, pattern, dst, length, flags);
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Trigger hardware to begin performing enqueued operations.
> + *
> + * This API is used to write the "doorbell" to the hardware to trigger it
> + * to begin the operations previously enqueued by rte_dmadev_copy/fill().
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + *
> + * @return
> + *   - =0: Successfully trigger hardware.
> + *   - <0: Failure to trigger hardware.
> + */
> +__rte_experimental
> +static inline int
> +rte_dmadev_submit(uint16_t dev_id, uint16_t vchan)
> +{
> +       struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> +
> +#ifdef RTE_DMADEV_DEBUG
> +       if (!rte_dmadev_is_valid_dev(dev_id) ||
> +           vchan >= dev->data->dev_conf.max_vchans)
> +               return -EINVAL;
> +       RTE_FUNC_PTR_OR_ERR_RET(*dev->submit, -ENOTSUP);
> +#endif
> +
> +       return (*dev->submit)(dev, vchan);
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Returns the number of operations that have been successfully completed.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + * @param nb_cpls
> + *   The maximum number of completed operations that can be processed.
> + * @param[out] last_idx
> + *   The last completed operation's index.
> + *   If not required, NULL can be passed in.
> + * @param[out] has_error
> + *   Indicates if there are transfer error.
> + *   If not required, NULL can be passed in.
> + *
> + * @return
> + *   The number of operations that successfully completed. This return value
> + *   must be less than or equal to the value of nb_cpls.
> + */
> +__rte_experimental
> +static inline uint16_t
> +rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls,
> +                    uint16_t *last_idx, bool *has_error)
> +{
> +       struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> +       uint16_t idx;
> +       bool err;
> +
> +#ifdef RTE_DMADEV_DEBUG
> +       if (!rte_dmadev_is_valid_dev(dev_id) ||
> +           vchan >= dev->data->dev_conf.max_vchans ||
> +           nb_cpls == 0)
> +               return 0;
> +       RTE_FUNC_PTR_OR_ERR_RET(*dev->completed, 0);
> +#endif
> +
> +       /* Ensure the pointer values are non-null to simplify drivers.
> +        * In most cases these should be compile time evaluated, since this is
> +        * an inline function.
> +        * - If NULL is explicitly passed as parameter, then compiler knows the
> +        *   value is NULL
> +        * - If address of local variable is passed as parameter, then compiler
> +        *   can know it's non-NULL.
> +        */
> +       if (last_idx == NULL)
> +               last_idx = &idx;
> +       if (has_error == NULL)
> +               has_error = &err;
> +
> +       *has_error = false;
> +       return (*dev->completed)(dev, vchan, nb_cpls, last_idx, has_error);
> +}
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Returns the number of operations that have been completed, and the
> + * operations result may succeed or fail.
> + *
> + * @param dev_id
> + *   The identifier of the device.
> + * @param vchan
> + *   The identifier of virtual DMA channel.
> + * @param nb_cpls
> + *   Indicates the size of status array.
> + * @param[out] last_idx
> + *   The last completed operation's index.
> + *   If not required, NULL can be passed in.
> + * @param[out] status
> + *   The error code of operations that completed.
> + *   @see enum rte_dma_status_code
> + *
> + * @return
> + *   The number of operations that completed. This return value must be less
> + *   than or equal to the value of nb_cpls.
> + */
> +__rte_experimental
> +static inline uint16_t
> +rte_dmadev_completed_status(uint16_t dev_id, uint16_t vchan,
> +                           const uint16_t nb_cpls, uint16_t *last_idx,
> +                           enum rte_dma_status_code *status)
> +{
> +       struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> +       uint16_t idx;
> +
> +#ifdef RTE_DMADEV_DEBUG
> +       if (!rte_dmadev_is_valid_dev(dev_id) ||
> +           vchan >= dev->data->dev_conf.max_vchans ||
> +           nb_cpls == 0 || status == NULL)
> +               return 0;
> +       RTE_FUNC_PTR_OR_ERR_RET(*dev->completed_status, 0);
> +#endif
> +
> +       if (last_idx == NULL)
> +               last_idx = &idx;
> +
> +       return (*dev->completed_status)(dev, vchan, nb_cpls, last_idx, status);
> +}
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +

  reply	other threads:[~2021-07-19  6:21 UTC|newest]

Thread overview: 339+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-02 13:18 [dpdk-dev] [PATCH] " Chengwen Feng
2021-07-02 13:59 ` Bruce Richardson
2021-07-04  9:30 ` Jerin Jacob
2021-07-05 10:52   ` Bruce Richardson
2021-07-05 11:12     ` Morten Brørup
2021-07-05 13:44       ` Bruce Richardson
2021-07-05 15:55     ` Jerin Jacob
2021-07-05 17:16       ` Bruce Richardson
2021-07-07  8:08         ` Jerin Jacob
2021-07-07  8:35           ` Bruce Richardson
2021-07-07 10:34             ` Jerin Jacob
2021-07-07 11:01               ` Bruce Richardson
2021-07-08  3:11                 ` fengchengwen
2021-07-08 18:35                   ` Jerin Jacob
2021-07-09  9:14                     ` Bruce Richardson
2021-07-11  7:14                       ` Jerin Jacob
2021-07-12  7:01                         ` Morten Brørup
2021-07-12  7:59                           ` Jerin Jacob
2021-07-06  8:20     ` fengchengwen
2021-07-06  9:27       ` Bruce Richardson
2021-07-06  3:01   ` fengchengwen
2021-07-06 10:01     ` Bruce Richardson
2021-07-04 14:57 ` Andrew Rybchenko
2021-07-06  3:56   ` fengchengwen
2021-07-06 10:02     ` Bruce Richardson
2021-07-04 15:21 ` Matan Azrad
2021-07-06  6:25   ` fengchengwen
2021-07-06  6:50     ` Matan Azrad
2021-07-06  9:08       ` fengchengwen
2021-07-06  9:17         ` Matan Azrad
2021-07-06 20:28 ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 1/9] dmadev: add missing exports Bruce Richardson
2021-07-07  8:26     ` David Marchand
2021-07-07  8:36       ` Bruce Richardson
2021-07-07  8:57         ` David Marchand
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 2/9] dmadev: change virtual addresses to IOVA Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 3/9] dmadev: add dump function Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 4/9] dmadev: remove xstats functions Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 5/9] dmadev: drop cookie typedef Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 6/9] dmadev: allow NULL parameters to completed ops call Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 7/9] dmadev: stats structure updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 8/9] drivers: add dma driver category Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 9/9] app/test: add basic dmadev unit test Bruce Richardson
2021-07-07  3:16   ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates fengchengwen
2021-07-07  8:11     ` Bruce Richardson
2021-07-07  8:14     ` Bruce Richardson
2021-07-07 10:42     ` Jerin Jacob
2021-07-11  9:25 ` [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library Chengwen Feng
2021-07-11  9:42   ` fengchengwen
2021-07-11 13:34     ` Jerin Jacob
2021-07-12  7:40       ` Morten Brørup
2021-07-11 14:25   ` Jerin Jacob
2021-07-12  7:15   ` Morten Brørup
2021-07-12  9:59   ` Jerin Jacob
2021-07-12 13:32     ` Bruce Richardson
2021-07-12 16:34       ` Jerin Jacob
2021-07-12 17:00         ` Bruce Richardson
2021-07-13  8:59           ` Jerin Jacob
2021-07-12 12:05   ` Bruce Richardson
2021-07-12 15:50   ` Bruce Richardson
2021-07-13  9:07     ` Jerin Jacob
2021-07-13 14:19   ` Ananyev, Konstantin
2021-07-13 14:28     ` Bruce Richardson
2021-07-13 12:27 ` [dpdk-dev] [PATCH v3] " Chengwen Feng
2021-07-13 13:06   ` fengchengwen
2021-07-13 13:37     ` Bruce Richardson
2021-07-15  6:44       ` Jerin Jacob
2021-07-15  8:25         ` Bruce Richardson
2021-07-15  9:49           ` Jerin Jacob
2021-07-15 10:00             ` Bruce Richardson
2021-07-13 16:02   ` Bruce Richardson
2021-07-14 12:22   ` Nipun Gupta
2021-07-15  8:29     ` fengchengwen
2021-07-15 11:16       ` Nipun Gupta
2021-07-15 12:11         ` Bruce Richardson
2021-07-15 12:31           ` Jerin Jacob
2021-07-15 12:34             ` Nipun Gupta
2021-07-14 16:05   ` Bruce Richardson
2021-07-15  7:10   ` Jerin Jacob
2021-07-15  9:03     ` Bruce Richardson
2021-07-15  9:30       ` Jerin Jacob
2021-07-15 10:03         ` Bruce Richardson
2021-07-15 10:05           ` Bruce Richardson
2021-07-15 15:41 ` [dpdk-dev] [PATCH v4] " Chengwen Feng
2021-07-15 16:04   ` fengchengwen
2021-07-15 16:33     ` Bruce Richardson
2021-07-16  3:04       ` fengchengwen
2021-07-16  9:50         ` Bruce Richardson
2021-07-16 12:34           ` Jerin Jacob
2021-07-16 12:40         ` Jerin Jacob
2021-07-16 12:48           ` Bruce Richardson
2021-07-16 12:54     ` Jerin Jacob
2021-07-16  2:45 ` [dpdk-dev] [PATCH v5] " Chengwen Feng
2021-07-16 13:20   ` Jerin Jacob
2021-07-16 14:41   ` Bruce Richardson
2021-07-19  3:29 ` [dpdk-dev] [PATCH v6] " Chengwen Feng
2021-07-19  6:21   ` Jerin Jacob [this message]
2021-07-19 13:20     ` fengchengwen
2021-07-19 13:36       ` Jerin Jacob
2021-07-19 13:05 ` [dpdk-dev] [PATCH v7] " Chengwen Feng
2021-07-20  1:14 ` [dpdk-dev] [PATCH v8] " Chengwen Feng
2021-07-20  5:03   ` Jerin Jacob
2021-07-20  6:53     ` fengchengwen
2021-07-20  9:43       ` Jerin Jacob
2021-07-20 10:13       ` Bruce Richardson
2021-07-20 11:12 ` [dpdk-dev] [PATCH v9] " Chengwen Feng
2021-07-20 12:05   ` Bruce Richardson
2021-07-20 12:46 ` [dpdk-dev] [PATCH v10] " Chengwen Feng
2021-07-26  6:53   ` fengchengwen
2021-07-26  8:31     ` Bruce Richardson
2021-07-27  3:57       ` fengchengwen
2021-07-26 11:03     ` Morten Brørup
2021-07-26 11:21       ` Jerin Jacob
2021-07-27  3:39 ` [dpdk-dev] [PATCH v11 0/2] support dmadev Chengwen Feng
2021-07-27  3:39   ` [dpdk-dev] [PATCH v11 1/2] dmadev: introduce DMA device library Chengwen Feng
2021-07-28 11:13     ` Bruce Richardson
2021-07-29  1:26       ` fengchengwen
2021-07-29  9:15         ` Bruce Richardson
2021-07-29 13:33           ` fengchengwen
2021-07-29 10:44         ` Jerin Jacob
2021-07-29 13:30           ` fengchengwen
2021-07-27  3:40   ` [dpdk-dev] [PATCH v11 2/2] doc: add dmadev library guide Chengwen Feng
2021-07-29 11:02     ` Jerin Jacob
2021-07-29 13:13       ` fengchengwen
2021-07-29 13:28         ` fengchengwen
2021-07-29 13:06 ` [dpdk-dev] [PATCH v12 0/6] support dmadev Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 5/6] doc: add DMA device library guide Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:29 ` [dpdk-dev] [PATCH v13 0/6] support dmadev Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-05 12:56     ` Walsh, Conor
2021-08-05 13:12       ` fengchengwen
2021-08-05 13:44         ` Conor Walsh
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-03 14:55     ` Jerin Jacob
2021-08-05 13:15       ` fengchengwen
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:46   ` [dpdk-dev] [PATCH v13 0/6] support dmadev fengchengwen
2021-08-10 11:54 ` [dpdk-dev] [PATCH v14 " Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-10 15:27     ` Walsh, Conor
2021-08-11  0:47       ` fengchengwen
2021-08-13  9:20       ` fengchengwen
2021-08-13 10:12         ` Walsh, Conor
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-13  9:09 ` [dpdk-dev] [PATCH v15 0/6] support dmadev Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-19 14:52     ` Bruce Richardson
2021-08-23  3:43       ` fengchengwen
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-23  3:31 ` [dpdk-dev] [PATCH v16 0/9] support dmadev Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 1/9] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 2/9] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 3/9] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 4/9] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 5/9] doc: add DMA device library guide Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 6/9] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-26 18:39     ` Bruce Richardson
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 7/9] dma/skeleton: add test cases Chengwen Feng
2021-08-23 14:03     ` Bruce Richardson
2021-08-26  9:30       ` fengchengwen
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 8/9] test: enable dmadev skeleton test Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 9/9] maintainers: add for dmadev Chengwen Feng
2021-08-28  7:29 ` [dpdk-dev] [PATCH v17 0/8] support dmadev Chengwen Feng
2021-08-28  7:29   ` [dpdk-dev] [PATCH v17 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 5/8] doc: add DMA device library guide Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 7/8] app/test: add dmadev API test Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 8/8] maintainers: add for dmadev Chengwen Feng
2021-08-28  8:25     ` fengchengwen
2021-08-30  8:19       ` Bruce Richardson
2021-09-02 10:54 ` [dpdk-dev] [PATCH v18 0/8] support dmadev Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 5/8] doc: add DMA device library guide Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 7/8] app/test: add dmadev API test Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 8/8] maintainers: add for dmadev Chengwen Feng
2021-09-02 11:51     ` Bruce Richardson
2021-09-02 13:39       ` fengchengwen
2021-09-03 12:59         ` Maxime Coquelin
2021-09-04  7:02           ` fengchengwen
2021-09-06  1:46             ` Li, Xiaoyun
2021-09-06  8:00               ` fengchengwen
2021-09-06  2:03           ` Xia, Chenbo
2021-09-06  8:01             ` fengchengwen
2021-09-02 13:13 ` [dpdk-dev] [PATCH v19 0/7] support dmadev Chengwen Feng
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-03 11:42     ` Gagandeep Singh
2021-09-04  1:31       ` fengchengwen
2021-09-06  6:48         ` Gagandeep Singh
2021-09-06  7:52           ` fengchengwen
2021-09-06  8:06             ` Jerin Jacob
2021-09-06  8:08             ` Bruce Richardson
2021-09-07 12:55             ` fengchengwen
2021-09-03 13:03     ` Bruce Richardson
2021-09-04  3:05       ` fengchengwen
2021-09-04 10:10       ` Morten Brørup
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:30       ` Bruce Richardson
2021-09-03 15:35     ` Conor Walsh
2021-09-04  8:52       ` fengchengwen
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-03 15:14     ` Kevin Laatz
2021-09-04  7:17       ` fengchengwen
2021-09-03 15:36     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-02 14:11     ` Walsh, Conor
2021-09-03  0:39       ` fengchengwen
2021-09-03 15:38         ` Walsh, Conor
2021-09-04  7:22           ` fengchengwen
2021-09-03 15:14     ` Kevin Laatz
2021-09-04 10:10 ` [dpdk-dev] [PATCH v20 0/7] support dmadev Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-06 13:35     ` Bruce Richardson
2021-09-07 13:05       ` fengchengwen
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-04 10:17     ` Jerin Jacob
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-06 13:37   ` [dpdk-dev] [PATCH v20 0/7] support dmadev Bruce Richardson
2021-09-07 12:56 ` [dpdk-dev] [PATCH v21 " Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-09 10:33     ` Thomas Monjalon
2021-09-09 11:18       ` Bruce Richardson
2021-09-09 11:29         ` Thomas Monjalon
2021-09-09 12:45           ` Bruce Richardson
2021-09-09 13:54             ` fengchengwen
2021-09-09 14:26               ` Thomas Monjalon
2021-09-09 14:31                 ` Bruce Richardson
2021-09-09 14:28               ` Bruce Richardson
2021-09-09 15:12                 ` Morten Brørup
2021-09-09 13:33       ` fengchengwen
2021-09-09 14:19         ` Thomas Monjalon
2021-09-16  3:57       ` fengchengwen
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-08  9:54     ` Walsh, Conor
2021-09-09 13:25       ` fengchengwen
2021-09-15 13:51     ` Kevin Laatz
2021-09-15 14:34       ` Bruce Richardson
2021-09-15 14:47         ` Kevin Laatz
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-16  3:41 ` [dpdk-dev] [PATCH v22 0/5] support dmadev Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 1/5] dmadev: introduce DMA device library Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 2/5] dmadev: add control plane function support Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 3/5] dmadev: add data " Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 4/5] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 5/5] app/test: add dmadev API test Chengwen Feng
2021-09-24 10:53 ` [dpdk-dev] [PATCH v23 0/6] support dmadev Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-04 21:12     ` Radha Mohan
2021-10-05  8:24       ` Kevin Laatz
2021-10-05 16:39         ` Radha Mohan
2021-10-08  1:52       ` fengchengwen
2021-10-06 10:26     ` Thomas Monjalon
2021-10-08  7:13       ` fengchengwen
2021-10-08 10:09         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 2/6] dmadev: add control plane function support Chengwen Feng
2021-10-05 10:16     ` Matan Azrad
2021-10-08  3:28       ` fengchengwen
2021-10-06 10:46     ` Thomas Monjalon
2021-10-08  7:55       ` fengchengwen
2021-10-08 10:18         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 3/6] dmadev: add data " Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 4/6] dmadev: add multi-process support Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-09  9:33 ` [dpdk-dev] [PATCH v24 0/6] support dmadev Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 3/6] dmadev: add data " Chengwen Feng
2021-10-09 10:03     ` fengchengwen
2021-10-11 10:40     ` Bruce Richardson
2021-10-11 12:31       ` fengchengwen
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-11  7:33 ` [dpdk-dev] [PATCH v25 0/6] support dmadev Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-12 19:09     ` Thomas Monjalon
2021-10-13  0:21       ` fengchengwen
2021-10-13  7:41         ` Thomas Monjalon
2021-10-15  8:29           ` Thomas Monjalon
2021-10-15  9:59             ` fengchengwen
2021-10-15 13:46               ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-11 15:44     ` Bruce Richardson
2021-10-12  3:57       ` fengchengwen
2021-10-12 18:57     ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 3/6] dmadev: add data " Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-13 12:24 ` [dpdk-dev] [PATCH v26 0/6] support dmadev Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 3/6] dmadev: add data " Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-13 12:25   ` [dpdk-dev] [PATCH v26 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-17 19:17   ` [dpdk-dev] [PATCH v26 0/6] support dmadev Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALBAE1MHV+7Rbs07CxnRb2Qh+bK60L9ua8Ur0uxdDTpUAf-zcA@mail.gmail.com \
    --to=jerinjacobk@gmail.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=fengchengwen@huawei.com \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=honnappa.nagarahalli@arm.com \
    --cc=jerinj@marvell.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mb@smartsharesystems.com \
    --cc=nipun.gupta@nxp.com \
    --cc=pkapoor@marvell.com \
    --cc=sburla@marvell.com \
    --cc=thomas@monjalon.net \
    --subject='Re: [dpdk-dev] [PATCH v6] dmadev: introduce DMA device library' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.