All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerin Jacob <jerinjacobk@gmail.com>
To: Bruce Richardson <bruce.richardson@intel.com>
Cc: "Chengwen Feng" <fengchengwen@huawei.com>,
	"Thomas Monjalon" <thomas@monjalon.net>,
	"Ferruh Yigit" <ferruh.yigit@intel.com>,
	"Jerin Jacob" <jerinj@marvell.com>, dpdk-dev <dev@dpdk.org>,
	"Morten Brørup" <mb@smartsharesystems.com>,
	"Nipun Gupta" <nipun.gupta@nxp.com>,
	"Hemant Agrawal" <hemant.agrawal@nxp.com>,
	"Maxime Coquelin" <maxime.coquelin@redhat.com>,
	"Honnappa Nagarahalli" <honnappa.nagarahalli@arm.com>,
	"David Marchand" <david.marchand@redhat.com>,
	"Satananda Burla" <sburla@marvell.com>,
	"Prasun Kapoor" <pkapoor@marvell.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	liangma@liangbit.com
Subject: Re: [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library
Date: Tue, 13 Jul 2021 14:37:04 +0530	[thread overview]
Message-ID: <CALBAE1NPGwJLDB95NEm+MFuJUDy6CeVOXF6EdpHqtibMXE+GmA@mail.gmail.com> (raw)
In-Reply-To: <YOxk2vyUEH1pPz/j@bricha3-MOBL.ger.corp.intel.com>

On Mon, Jul 12, 2021 at 9:21 PM Bruce Richardson
<bruce.richardson@intel.com> wrote:
>
> On Sun, Jul 11, 2021 at 05:25:56PM +0800, Chengwen Feng wrote:
> > This patch introduce 'dmadevice' which is a generic type of DMA
> > device.
> >
> > The APIs of dmadev library exposes some generic operations which can
> > enable configuration and I/O with the DMA devices.
> >
> > Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
>
> Hi again,
>
> some further review comments inline.
>
> /Bruce
>
> > ---
> >  MAINTAINERS                  |    4 +
> >  config/rte_config.h          |    3 +
> >  lib/dmadev/meson.build       |    6 +
> >  lib/dmadev/rte_dmadev.c      |  560 +++++++++++++++++++++++
> >  lib/dmadev/rte_dmadev.h      | 1030 ++++++++++++++++++++++++++++++++++++++++++
> >  lib/dmadev/rte_dmadev_core.h |  159 +++++++
> >  lib/dmadev/rte_dmadev_pmd.h  |   72 +++
> >  lib/dmadev/version.map       |   40 ++
> >  lib/meson.build              |    1 +
>
> <snip>
>
> > diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
> > new file mode 100644
> > index 0000000..8779512
> > --- /dev/null
> > +++ b/lib/dmadev/rte_dmadev.h
> > @@ -0,0 +1,1030 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2021 HiSilicon Limited.
> > + * Copyright(c) 2021 Intel Corporation.
> > + * Copyright(c) 2021 Marvell International Ltd.
> > + */
> > +
> > +#ifndef _RTE_DMADEV_H_
> > +#define _RTE_DMADEV_H_
> > +
> > +/**
> > + * @file rte_dmadev.h
> > + *
> > + * RTE DMA (Direct Memory Access) device APIs.
> > + *
> > + * The DMA framework is built on the following model:
> > + *
> > + *     ---------------   ---------------       ---------------
> > + *     | virtual DMA |   | virtual DMA |       | virtual DMA |
> > + *     | channel     |   | channel     |       | channel     |
> > + *     ---------------   ---------------       ---------------
> > + *            |                |                      |
> > + *            ------------------                      |
> > + *                     |                              |
> > + *               ------------                    ------------
> > + *               |  dmadev  |                    |  dmadev  |
> > + *               ------------                    ------------
> > + *                     |                              |
> > + *            ------------------               ------------------
> > + *            | HW-DMA-channel |               | HW-DMA-channel |
> > + *            ------------------               ------------------
> > + *                     |                              |
> > + *                     --------------------------------
> > + *                                     |
> > + *                           ---------------------
> > + *                           | HW-DMA-Controller |
> > + *                           ---------------------
> > + *
> > + * The DMA controller could have multilpe HW-DMA-channels (aka. HW-DMA-queues),
> > + * each HW-DMA-channel should be represented by a dmadev.
> > + *
> > + * The dmadev could create multiple virtual DMA channel, each virtual DMA
> > + * channel represents a different transfer context. The DMA operation request
> > + * must be submitted to the virtual DMA channel.
> > + * E.G. Application could create virtual DMA channel 0 for mem-to-mem transfer
> > + *      scenario, and create virtual DMA channel 1 for mem-to-dev transfer
> > + *      scenario.
> > + *
> > + * The dmadev are dynamically allocated by rte_dmadev_pmd_allocate() during the
> > + * PCI/SoC device probing phase performed at EAL initialization time. And could
> > + * be released by rte_dmadev_pmd_release() during the PCI/SoC device removing
> > + * phase.
> > + *
> > + * We use 'uint16_t dev_id' as the device identifier of a dmadev, and
> > + * 'uint16_t vchan' as the virtual DMA channel identifier in one dmadev.
> > + *
> > + * The functions exported by the dmadev API to setup a device designated by its
> > + * device identifier must be invoked in the following order:
> > + *     - rte_dmadev_configure()
> > + *     - rte_dmadev_vchan_setup()
> > + *     - rte_dmadev_start()
> > + *
> > + * Then, the application can invoke dataplane APIs to process jobs.
> > + *
> > + * If the application wants to change the configuration (i.e. call
> > + * rte_dmadev_configure()), it must call rte_dmadev_stop() first to stop the
> > + * device and then do the reconfiguration before calling rte_dmadev_start()
> > + * again. The dataplane APIs should not be invoked when the device is stopped.
> > + *
> > + * Finally, an application can close a dmadev by invoking the
> > + * rte_dmadev_close() function.
> > + *
> > + * The dataplane APIs include two parts:
> > + *   a) The first part is the submission of operation requests:
> > + *        - rte_dmadev_copy()
> > + *        - rte_dmadev_copy_sg() - scatter-gather form of copy
> > + *        - rte_dmadev_fill()
> > + *        - rte_dmadev_fill_sg() - scatter-gather form of fill
> > + *        - rte_dmadev_perform() - issue doorbell to hardware
> > + *      These APIs could work with different virtual DMA channels which have
> > + *      different contexts.
> > + *      The first four APIs are used to submit the operation request to the
> > + *      virtual DMA channel, if the submission is successful, a uint16_t
> > + *      ring_idx is returned, otherwise a negative number is returned.
> > + *   b) The second part is to obtain the result of requests:
> > + *        - rte_dmadev_completed()
> > + *            - return the number of operation requests completed successfully.
> > + *        - rte_dmadev_completed_fails()
> > + *            - return the number of operation requests failed to complete.
>
> Please rename this to "completed_status" to allow the return of information
> other than just errors. As I suggested before, I think this should also be
> usable as a slower version of "completed" even in the case where there are
> no errors, in that it returns status information for each and every job
> rather than just returning as soon as it hits a failure.
>
> > + * + * About the ring_idx which rte_dmadev_copy/copy_sg/fill/fill_sg()
> > returned, + * the rules are as follows: + *   a) ring_idx for each
> > virtual DMA channel are independent.  + *   b) For a virtual DMA channel,
> > the ring_idx is monotonically incremented, + *      when it reach
> > UINT16_MAX, it wraps back to zero.
>
> Based on other feedback, I suggest we put in the detail here that: "This
> index can be used by applications to track per-job metadata in an
> application-defined circular ring, where the ring is a power-of-2 size, and
> the indexes are masked appropriately."
>
> > + *   c) The initial ring_idx of a virtual DMA channel is zero, after the device
> > + *      is stopped or reset, the ring_idx needs to be reset to zero.
> > + *   Example:
> > + *      step-1: start one dmadev
> > + *      step-2: enqueue a copy operation, the ring_idx return is 0
> > + *      step-3: enqueue a copy operation again, the ring_idx return is 1
> > + *      ...
> > + *      step-101: stop the dmadev
> > + *      step-102: start the dmadev
> > + *      step-103: enqueue a copy operation, the cookie return is 0
> > + *      ...
> > + *      step-x+0: enqueue a fill operation, the ring_idx return is 65535
> > + *      step-x+1: enqueue a copy operation, the ring_idx return is 0
> > + *      ...
> > + *
> > + * By default, all the non-dataplane functions of the dmadev API exported by a
> > + * PMD are lock-free functions which assume to not be invoked in parallel on
> > + * different logical cores to work on the same target object.
> > + *
> > + * The dataplane functions of the dmadev API exported by a PMD can be MT-safe
> > + * only when supported by the driver, generally, the driver will reports two
> > + * capabilities:
> > + *   a) Whether to support MT-safe for the submit/completion API of the same
> > + *      virtual DMA channel.
> > + *      E.G. one thread do submit operation, another thread do completion
> > + *           operation.
> > + *      If driver support it, then declare RTE_DMA_DEV_CAPA_MT_VCHAN.
> > + *      If driver don't support it, it's up to the application to guarantee
> > + *      MT-safe.
> > + *   b) Whether to support MT-safe for different virtual DMA channels.
> > + *      E.G. one thread do operation on virtual DMA channel 0, another thread
> > + *           do operation on virtual DMA channel 1.
> > + *      If driver support it, then declare RTE_DMA_DEV_CAPA_MT_MULTI_VCHAN.
> > + *      If driver don't support it, it's up to the application to guarantee
> > + *      MT-safe.
> > + *
> > + */
>
> Just to check - do we have hardware that currently supports these
> capabilities? For Intel HW, we will only support one virtual channel per
> device without any MT-safety guarantees, so won't be setting either of
> these flags. If any of these flags are unused in all planned drivers, we
> should drop them from the spec until they prove necessary. Idealy,
> everything in the dmadev definition should be testable, and features unused
> by anyone obviously will be untested.
>
> > +
> > +#include <rte_common.h>
> > +#include <rte_compat.h>
> > +#include <rte_errno.h>
> > +#include <rte_memory.h>
> > +
> > +#ifdef __cplusplus
> > +extern "C" {
> > +#endif
> > +
> > +#define RTE_DMADEV_NAME_MAX_LEN      RTE_DEV_NAME_MAX_LEN
> > +
> > +extern int rte_dmadev_logtype;
> > +
> > +#define RTE_DMADEV_LOG(level, ...) \
> > +     rte_log(RTE_LOG_ ## level, rte_dmadev_logtype, "" __VA_ARGS__)
> > +
> > +/* Macros to check for valid port */
> > +#define RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, retval) do { \
> > +     if (!rte_dmadev_is_valid_dev(dev_id)) { \
> > +             RTE_DMADEV_LOG(ERR, "Invalid dev_id=%u\n", dev_id); \
> > +             return retval; \
> > +     } \
> > +} while (0)
> > +
> > +#define RTE_DMADEV_VALID_DEV_ID_OR_RET(dev_id) do { \
> > +     if (!rte_dmadev_is_valid_dev(dev_id)) { \
> > +             RTE_DMADEV_LOG(ERR, "Invalid dev_id=%u\n", dev_id); \
> > +             return; \
> > +     } \
> > +} while (0)
> > +
>
> Can we avoid using these in the inline functions in this file, and move
> them to the _pmd.h which is for internal PMD use only? It would mean we
> don't get logging from the key dataplane functions, but I would hope the
> return values would provide enough info.
>
> Alternatively, can we keep the logtype definition and first macro and move
> the other two to the _pmd.h file.
>
> > +/**
> > + * @internal
> > + * Validate if the DMA device index is a valid attached DMA device.
> > + *
> > + * @param dev_id
> > + *   DMA device index.
> > + *
> > + * @return
> > + *   - If the device index is valid (true) or not (false).
> > + */
> > +__rte_internal
> > +bool
> > +rte_dmadev_is_valid_dev(uint16_t dev_id);
> > +
> > +/**
> > + * rte_dma_sg - can hold scatter DMA operation request
> > + */
> > +struct rte_dma_sg {
> > +     rte_iova_t src;
> > +     rte_iova_t dst;
> > +     uint32_t length;
> > +};
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Get the total number of DMA devices that have been successfully
> > + * initialised.
> > + *
> > + * @return
> > + *   The total number of usable DMA devices.
> > + */
> > +__rte_experimental
> > +uint16_t
> > +rte_dmadev_count(void);
> > +
> > +/**
> > + * The capabilities of a DMA device
> > + */
> > +#define RTE_DMA_DEV_CAPA_MEM_TO_MEM  (1ull << 0)
> > +/**< DMA device support mem-to-mem transfer.
>
> Do we need this? Can we assume that any device appearing as a dmadev can
> do mem-to-mem copies, and drop the capability for mem-to-mem and the
> capability for copying?
>
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_MEM_TO_DEV  (1ull << 1)
> > +/**< DMA device support slave mode & mem-to-dev transfer.
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_DEV_TO_MEM  (1ull << 2)
> > +/**< DMA device support slave mode & dev-to-mem transfer.
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_DEV_TO_DEV  (1ull << 3)
> > +/**< DMA device support slave mode & dev-to-dev transfer.
> > + *
>
> Just to confirm, are there devices currently planned for dmadev that

We are planning to use this support as our exiting raw driver has this.

> supports only a subset of these flags? Thinking particularly of the
> dev-2-mem and mem-2-dev ones here - do any of the devices we are
> considering not support using device memory?
> [Again, just want to ensure we aren't adding too much stuff that we don't
> need yet]



>
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_OPS_COPY    (1ull << 4)
> > +/**< DMA device support copy ops.
> > + *
>
> Suggest dropping this and making it min for dmadev.
>
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_OPS_FILL    (1ull << 5)
> > +/**< DMA device support fill ops.
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_OPS_SG              (1ull << 6)
> > +/**< DMA device support scatter-list ops.
> > + * If device support ops_copy and ops_sg, it means supporting copy_sg ops.
> > + * If device support ops_fill and ops_sg, it means supporting fill_sg ops.
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_FENCE               (1ull << 7)
> > +/**< DMA device support fence.
> > + * If device support fence, then application could set a fence flags when
> > + * enqueue operation by rte_dma_copy/copy_sg/fill/fill_sg.
> > + * If a operation has a fence flags, it means the operation must be processed
> > + * only after all previous operations are completed.
> > + *
>
> Is this needed? As I understand it, the Marvell driver doesn't require
> fences so providing one is a no-op. Therefore, this flag is probably
> unnecessary.

+1

>
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_SVA         (1ull << 8)
> > +/**< DMA device support SVA which could use VA as DMA address.
> > + * If device support SVA then application could pass any VA address like memory
> > + * from rte_malloc(), rte_memzone(), malloc, stack memory.
> > + * If device don't support SVA, then application should pass IOVA address which
> > + * from rte_malloc(), rte_memzone().
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_MT_VCHAN    (1ull << 9)
> > +/**< DMA device support MT-safe of a virtual DMA channel.
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
> > +#define RTE_DMA_DEV_CAPA_MT_MULTI_VCHAN      (1ull << 10)
> > +/**< DMA device support MT-safe of different virtual DMA channels.
> > + *
> > + * @see struct rte_dmadev_info::dev_capa
> > + */
>
> As with comments above - let's check that these will actually be used
> before we add them.
>
> > +
> > +/**
> > + * A structure used to retrieve the contextual information of
> > + * an DMA device
> > + */
> > +struct rte_dmadev_info {
> > +     struct rte_device *device; /**< Generic Device information */
> > +     uint64_t dev_capa; /**< Device capabilities (RTE_DMA_DEV_CAPA_) */
> > +     /** Maximum number of virtual DMA channels supported */
> > +     uint16_t max_vchans;
> > +     /** Maximum allowed number of virtual DMA channel descriptors */
> > +     uint16_t max_desc;
> > +     /** Minimum allowed number of virtual DMA channel descriptors */
> > +     uint16_t min_desc;
> > +     uint16_t nb_vchans; /**< Number of virtual DMA channel configured */
> > +};
>
> Let's add rte_dmadev_conf struct into this to return the configuration
> settings.
>
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Retrieve the contextual information of a DMA device.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param[out] dev_info
> > + *   A pointer to a structure of type *rte_dmadev_info* to be filled with the
> > + *   contextual information of the device.
> > + *
> > + * @return
> > + *   - =0: Success, driver updates the contextual information of the DMA device
> > + *   - <0: Error code returned by the driver info get function.
> > + *
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info);
> > +
>
> Should have "const" on second param.
>
> > +/**
> > + * A structure used to configure a DMA device.
> > + */
> > +struct rte_dmadev_conf {
> > +     /** Maximum number of virtual DMA channel to use.
> > +      * This value cannot be greater than the field 'max_vchans' of struct
> > +      * rte_dmadev_info which get from rte_dmadev_info_get().
> > +      */
> > +     uint16_t max_vchans;
> > +     /** Enable bit for MT-safe of a virtual DMA channel.
> > +      * This bit can be enabled only when the device supports
> > +      * RTE_DMA_DEV_CAPA_MT_VCHAN.
> > +      * @see RTE_DMA_DEV_CAPA_MT_VCHAN
> > +      */
> > +     uint8_t enable_mt_vchan : 1;
> > +     /** Enable bit for MT-safe of different virtual DMA channels.
> > +      * This bit can be enabled only when the device supports
> > +      * RTE_DMA_DEV_CAPA_MT_MULTI_VCHAN.
> > +      * @see RTE_DMA_DEV_CAPA_MT_MULTI_VCHAN
> > +      */
> > +     uint8_t enable_mt_multi_vchan : 1;
> > +     uint64_t reserved[2]; /**< Reserved for future fields */
> > +};
>
> Drop the reserved fields. ABI versioning is a better way to deal with
> adding new fields.

+1

>
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Configure a DMA device.
> > + *
> > + * This function must be invoked first before any other function in the
> > + * API. This function can also be re-invoked when a device is in the
> > + * stopped state.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device to configure.
> > + * @param dev_conf
> > + *   The DMA device configuration structure encapsulated into rte_dmadev_conf
> > + *   object.
> > + *
> > + * @return
> > + *   - =0: Success, device configured.
> > + *   - <0: Error code returned by the driver configuration function.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Start a DMA device.
> > + *
> > + * The device start step is the last one and consists of setting the DMA
> > + * to start accepting jobs.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + *
> > + * @return
> > + *   - =0: Success, device started.
> > + *   - <0: Error code returned by the driver start function.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_start(uint16_t dev_id);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Stop a DMA device.
> > + *
> > + * The device can be restarted with a call to rte_dmadev_start()
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + *
> > + * @return
> > + *   - =0: Success, device stopped.
> > + *   - <0: Error code returned by the driver stop function.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_stop(uint16_t dev_id);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Close a DMA device.
> > + *
> > + * The device cannot be restarted after this call.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + *
> > + * @return
> > + *  - =0: Successfully close device
> > + *  - <0: Failure to close device
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_close(uint16_t dev_id);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Reset a DMA device.
> > + *
> > + * This is different from cycle of rte_dmadev_start->rte_dmadev_stop in the
> > + * sense similar to hard or soft reset.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + *
> > + * @return
> > + *   - =0: Successfully reset device.
> > + *   - <0: Failure to reset device.
> > + *   - (-ENOTSUP): If the device doesn't support this function.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_reset(uint16_t dev_id);
> > +
> > +/**
> > + * DMA transfer direction defines.
> > + */
> > +#define RTE_DMA_MEM_TO_MEM   (1ull << 0)
> > +/**< DMA transfer direction - from memory to memory.
> > + *
> > + * @see struct rte_dmadev_vchan_conf::direction
> > + */
> > +#define RTE_DMA_MEM_TO_DEV   (1ull << 1)
> > +/**< DMA transfer direction - slave mode & from memory to device.
> > + * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs. In
> > + * this case, the ARM SoCs works in slave mode, it could initiate a DMA move
> > + * request from ARM memory to x86 host memory.
>
> For clarity, it would be good to specify in the scenario described which
> memory is the "mem" and which is the "dev" (I assume SoC memory is "mem"
> and x86 host memory is "dev"??)
>
> > + *
> > + * @see struct rte_dmadev_vchan_conf::direction
> > + */
> > +#define RTE_DMA_DEV_TO_MEM   (1ull << 2)
> > +/**< DMA transfer direction - slave mode & from device to memory.
> > + * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs. In
> > + * this case, the ARM SoCs works in slave mode, it could initiate a DMA move
> > + * request from x86 host memory to ARM memory.
> > + *
> > + * @see struct rte_dmadev_vchan_conf::direction
> > + */
> > +#define RTE_DMA_DEV_TO_DEV   (1ull << 3)
> > +/**< DMA transfer direction - slave mode & from device to device.
> > + * In a typical scenario, ARM SoCs are installed on x86 servers as iNICs. In
> > + * this case, the ARM SoCs works in slave mode, it could initiate a DMA move
> > + * request from x86 host memory to another x86 host memory.
> > + *
> > + * @see struct rte_dmadev_vchan_conf::direction
> > + */
> > +#define RTE_DMA_TRANSFER_DIR_ALL     (RTE_DMA_MEM_TO_MEM | \
> > +                                      RTE_DMA_MEM_TO_DEV | \
> > +                                      RTE_DMA_DEV_TO_MEM | \
> > +                                      RTE_DMA_DEV_TO_DEV)
> > +
> > +/**
> > + * enum rte_dma_slave_port_type - slave mode type defines
> > + */
> > +enum rte_dma_slave_port_type {
> > +     /** The slave port is PCIE. */
> > +     RTE_DMA_SLAVE_PORT_PCIE = 1,
> > +};
> > +
>
> As previously mentioned, this needs to be updated to use other terms.
> For some suggested alternatives see:
> https://doc.dpdk.org/guides-21.05/contributing/coding_style.html#naming
>
> > +/**
> > + * A structure used to descript slave port parameters.
> > + */
> > +struct rte_dma_slave_port_parameters {
> > +     enum rte_dma_slave_port_type port_type;
> > +     union {
> > +             /** For PCIE port */
> > +             struct {
> > +                     /** The physical function number which to use */
> > +                     uint64_t pf_number : 6;
> > +                     /** Virtual function enable bit */
> > +                     uint64_t vf_enable : 1;
> > +                     /** The virtual function number which to use */
> > +                     uint64_t vf_number : 8;
> > +                     uint64_t pasid : 20;
> > +                     /** The attributes filed in TLP packet */
> > +                     uint64_t tlp_attr : 3;
> > +             };
> > +     };
> > +};
> > +
> > +/**
> > + * A structure used to configure a virtual DMA channel.
> > + */
> > +struct rte_dmadev_vchan_conf {
> > +     uint8_t direction; /**< Set of supported transfer directions */
> > +     /** Number of descriptor for the virtual DMA channel */
> > +     uint16_t nb_desc;
> > +     /** 1) Used to describes the dev parameter in the mem-to-dev/dev-to-mem
> > +      * transfer scenario.
> > +      * 2) Used to describes the src dev parameter in the dev-to-dev
> > +      * transfer scenario.
> > +      */
> > +     struct rte_dma_slave_port_parameters port;
> > +     /** Used to describes the dst dev parameters in the dev-to-dev
> > +      * transfer scenario.
> > +      */
> > +     struct rte_dma_slave_port_parameters peer_port;
> > +     uint64_t reserved[2]; /**< Reserved for future fields */
> > +};
>
> Let's drop the reserved fields and use ABI versioning if necesssary in
> future.
>
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Allocate and set up a virtual DMA channel.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param conf
> > + *   The virtual DMA channel configuration structure encapsulated into
> > + *   rte_dmadev_vchan_conf object.
> > + *
> > + * @return
> > + *   - >=0: Allocate success, it is the virtual DMA channel id. This value must
> > + *          be less than the field 'max_vchans' of struct rte_dmadev_conf
> > +         which configured by rte_dmadev_configure().
>
> nit: whitespace error here.
>
> > + *   - <0: Error code returned by the driver virtual channel setup function.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_vchan_setup(uint16_t dev_id,
> > +                    const struct rte_dmadev_vchan_conf *conf);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Release a virtual DMA channel.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel which return by vchan setup.
> > + *
> > + * @return
> > + *   - =0: Successfully release the virtual DMA channel.
> > + *   - <0: Error code returned by the driver virtual channel release function.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_vchan_release(uint16_t dev_id, uint16_t vchan);
> > +
> > +/**
> > + * rte_dmadev_stats - running statistics.
> > + */
> > +struct rte_dmadev_stats {
> > +     /** Count of operations which were successfully enqueued */
> > +     uint64_t enqueued_count;
> > +     /** Count of operations which were submitted to hardware */
> > +     uint64_t submitted_count;
> > +     /** Count of operations which failed to complete */
> > +     uint64_t completed_fail_count;
> > +     /** Count of operations which successfully complete */
> > +     uint64_t completed_count;
> > +     uint64_t reserved[4]; /**< Reserved for future fields */
> > +};
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Retrieve basic statistics of a or all virtual DMA channel(s).
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel, -1 means all channels.
> > + * @param[out] stats
> > + *   The basic statistics structure encapsulated into rte_dmadev_stats
> > + *   object.
> > + *
> > + * @return
> > + *   - =0: Successfully retrieve stats.
> > + *   - <0: Failure to retrieve stats.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_stats_get(uint16_t dev_id, int vchan,
>
> vchan as uint16_t rather than int, I think. This would apply to all
> dataplane functions. There is no need for a signed vchan value.
>
> > +                  struct rte_dmadev_stats *stats);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Reset basic statistics of a or all virtual DMA channel(s).
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel, -1 means all channels.
> > + *
> > + * @return
> > + *   - =0: Successfully reset stats.
> > + *   - <0: Failure to reset stats.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_stats_reset(uint16_t dev_id, int vchan);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Dump DMA device info.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param f
> > + *   The file to write the output to.
> > + *
> > + * @return
> > + *   0 on success. Non-zero otherwise.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_dump(uint16_t dev_id, FILE *f);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Trigger the dmadev self test.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + *
> > + * @return
> > + *   - 0: Selftest successful.
> > + *   - -ENOTSUP if the device doesn't support selftest
> > + *   - other values < 0 on failure.
> > + */
> > +__rte_experimental
> > +int
> > +rte_dmadev_selftest(uint16_t dev_id);
>
> I don't think this needs to be in the public API, since it should only be
> for the autotest app to use. Maybe move the prototype to the _pmd.h (since
> we don't have a separate internal header), and then the autotest app can
> pick it up from there.
>
> > +
> > +#include "rte_dmadev_core.h"
> > +
> > +/**
> > + *  DMA flags to augment operation preparation.
> > + *  Used as the 'flags' parameter of rte_dmadev_copy/copy_sg/fill/fill_sg.
> > + */
> > +#define RTE_DMA_FLAG_FENCE   (1ull << 0)
> > +/**< DMA fence flag
> > + * It means the operation with this flag must be processed only after all
> > + * previous operations are completed.
> > + *
> > + * @see rte_dmadev_copy()
> > + * @see rte_dmadev_copy_sg()
> > + * @see rte_dmadev_fill()
> > + * @see rte_dmadev_fill_sg()
> > + */
>
> As a general comment, I think all these multi-line comments should go
> before the item they describe. Comments after should only be used in the
> case where the comment fits on the rest of the line after a value.
>
> We also should define the SUBMIT flag as suggested by Jerin, to allow apps
> to automatically submit jobs after enqueue.
>
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Enqueue a copy operation onto the virtual DMA channel.
> > + *
> > + * This queues up a copy operation to be performed by hardware, but does not
> > + * trigger hardware to begin that operation.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + * @param src
> > + *   The address of the source buffer.
> > + * @param dst
> > + *   The address of the destination buffer.
> > + * @param length
> > + *   The length of the data to be copied.
> > + * @param flags
> > + *   An flags for this operation.
> > + *
> > + * @return
> > + *   - 0..UINT16_MAX: index of enqueued copy job.
> > + *   - <0: Error code returned by the driver copy function.
> > + */
> > +__rte_experimental
> > +static inline int
> > +rte_dmadev_copy(uint16_t dev_id, uint16_t vchan, rte_iova_t src, rte_iova_t dst,
> > +             uint32_t length, uint64_t flags)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->copy, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +     return (*dev->copy)(dev, vchan, src, dst, length, flags);
> > +}
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Enqueue a scatter list copy operation onto the virtual DMA channel.
> > + *
> > + * This queues up a scatter list copy operation to be performed by hardware,
> > + * but does not trigger hardware to begin that operation.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + * @param sg
> > + *   The pointer of scatterlist.
> > + * @param sg_len
> > + *   The number of scatterlist elements.
> > + * @param flags
> > + *   An flags for this operation.
> > + *
> > + * @return
> > + *   - 0..UINT16_MAX: index of enqueued copy job.
> > + *   - <0: Error code returned by the driver copy function.
> > + */
> > +__rte_experimental
> > +static inline int
> > +rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vchan, const struct rte_dma_sg *sg,
> > +                uint32_t sg_len, uint64_t flags)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(sg, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->copy_sg, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +     return (*dev->copy_sg)(dev, vchan, sg, sg_len, flags);
> > +}
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Enqueue a fill operation onto the virtual DMA channel.
> > + *
> > + * This queues up a fill operation to be performed by hardware, but does not
> > + * trigger hardware to begin that operation.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + * @param pattern
> > + *   The pattern to populate the destination buffer with.
> > + * @param dst
> > + *   The address of the destination buffer.
> > + * @param length
> > + *   The length of the destination buffer.
> > + * @param flags
> > + *   An flags for this operation.
> > + *
> > + * @return
> > + *   - 0..UINT16_MAX: index of enqueued copy job.
> > + *   - <0: Error code returned by the driver copy function.
> > + */
> > +__rte_experimental
> > +static inline int
> > +rte_dmadev_fill(uint16_t dev_id, uint16_t vchan, uint64_t pattern,
> > +             rte_iova_t dst, uint32_t length, uint64_t flags)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->fill, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +     return (*dev->fill)(dev, vchan, pattern, dst, length, flags);
> > +}
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Enqueue a scatter list fill operation onto the virtual DMA channel.
> > + *
> > + * This queues up a scatter list fill operation to be performed by hardware,
> > + * but does not trigger hardware to begin that operation.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + * @param pattern
> > + *   The pattern to populate the destination buffer with.
> > + * @param sg
> > + *   The pointer of scatterlist.
> > + * @param sg_len
> > + *   The number of scatterlist elements.
> > + * @param flags
> > + *   An flags for this operation.
> > + *
> > + * @return
> > + *   - 0..UINT16_MAX: index of enqueued copy job.
> > + *   - <0: Error code returned by the driver copy function.
> > + */
> > +__rte_experimental
> > +static inline int
> > +rte_dmadev_fill_sg(uint16_t dev_id, uint16_t vchan, uint64_t pattern,
> > +                const struct rte_dma_sg *sg, uint32_t sg_len,
> > +                uint64_t flags)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(sg, -ENOTSUP);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->fill, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +     return (*dev->fill_sg)(dev, vchan, pattern, sg, sg_len, flags);
> > +}
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Trigger hardware to begin performing enqueued operations.
> > + *
> > + * This API is used to write the "doorbell" to the hardware to trigger it
> > + * to begin the operations previously enqueued by rte_dmadev_copy/fill()
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + *
> > + * @return
> > + *   - =0: Successfully trigger hardware.
> > + *   - <0: Failure to trigger hardware.
> > + */
> > +__rte_experimental
> > +static inline int
> > +rte_dmadev_submit(uint16_t dev_id, uint16_t vchan)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->submit, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +     return (*dev->submit)(dev, vchan);
> > +}
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Returns the number of operations that have been successfully completed.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + * @param nb_cpls
> > + *   The maximum number of completed operations that can be processed.
> > + * @param[out] last_idx
> > + *   The last completed operation's index.
> > + *   If not required, NULL can be passed in.
> > + * @param[out] has_error
> > + *   Indicates if there are transfer error.
> > + *   If not required, NULL can be passed in.
> > + *
> > + * @return
> > + *   The number of operations that successfully completed.
> > + */
> > +__rte_experimental
> > +static inline uint16_t
> > +rte_dmadev_completed(uint16_t dev_id, uint16_t vchan, const uint16_t nb_cpls,
> > +                  uint16_t *last_idx, bool *has_error)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +     uint16_t idx;
> > +     bool err;
> > +
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->completed, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +     if (nb_cpls == 0) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid nb_cpls\n");
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +
> > +     /* Ensure the pointer values are non-null to simplify drivers.
> > +      * In most cases these should be compile time evaluated, since this is
> > +      * an inline function.
> > +      * - If NULL is explicitly passed as parameter, then compiler knows the
> > +      *   value is NULL
> > +      * - If address of local variable is passed as parameter, then compiler
> > +      *   can know it's non-NULL.
> > +      */
> > +     if (last_idx == NULL)
> > +             last_idx = &idx;
> > +     if (has_error == NULL)
> > +             has_error = &err;
> > +
> > +     *has_error = false;
> > +     return (*dev->completed)(dev, vchan, nb_cpls, last_idx, has_error);
> > +}
> > +
> > +/**
> > + * DMA transfer status code defines
> > + */
> > +enum rte_dma_status_code {
> > +     /** The operation completed successfully */
> > +     RTE_DMA_STATUS_SUCCESSFUL = 0,
> > +     /** The operation failed to complete due active drop
> > +      * This is mainly used when processing dev_stop, allow outstanding
> > +      * requests to be completed as much as possible.
> > +      */
> > +     RTE_DMA_STATUS_ACTIVE_DROP,
> > +     /** The operation failed to complete due invalid source address */
> > +     RTE_DMA_STATUS_INVALID_SRC_ADDR,
> > +     /** The operation failed to complete due invalid destination address */
> > +     RTE_DMA_STATUS_INVALID_DST_ADDR,
> > +     /** The operation failed to complete due invalid length */
> > +     RTE_DMA_STATUS_INVALID_LENGTH,
> > +     /** The operation failed to complete due invalid opcode
> > +      * The DMA descriptor could have multiple format, which are
> > +      * distinguished by the opcode field.
> > +      */
> > +     RTE_DMA_STATUS_INVALID_OPCODE,
> > +     /** The operation failed to complete due bus err */
> > +     RTE_DMA_STATUS_BUS_ERROR,
> > +     /** The operation failed to complete due data poison */
> > +     RTE_DMA_STATUS_DATA_POISION,
> > +     /** The operation failed to complete due descriptor read error */
> > +     RTE_DMA_STATUS_DESCRIPTOR_READ_ERROR,
> > +     /** The operation failed to complete due device link error
> > +      * Used to indicates that the link error in the mem-to-dev/dev-to-mem/
> > +      * dev-to-dev transfer scenario.
> > +      */
> > +     RTE_DMA_STATUS_DEV_LINK_ERROR,
> > +     /** Driver specific status code offset
> > +      * Start status code for the driver to define its own error code.
> > +      */
> > +     RTE_DMA_STATUS_DRV_SPECIFIC_OFFSET = 0x10000,
> > +};
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Returns the number of operations that failed to complete.
> > + * NOTE: This API was used when rte_dmadev_completed has_error was set.
> > + *
> > + * @param dev_id
> > + *   The identifier of the device.
> > + * @param vchan
> > + *   The identifier of virtual DMA channel.
> > + * @param nb_status
> > + *   Indicates the size of status array.
> > + * @param[out] status
> > + *   The error code of operations that failed to complete.
> > + *   Some standard error code are described in 'enum rte_dma_status_code'
> > + *   @see rte_dma_status_code
> > + * @param[out] last_idx
> > + *   The last failed completed operation's index.
> > + *
> > + * @return
> > + *   The number of operations that failed to complete.
> > + */
> > +__rte_experimental
> > +static inline uint16_t
> > +rte_dmadev_completed_fails(uint16_t dev_id, uint16_t vchan,
> > +                        const uint16_t nb_status, uint32_t *status,
> > +                        uint16_t *last_idx)
> > +{
> > +     struct rte_dmadev *dev = &rte_dmadevices[dev_id];
> > +#ifdef RTE_DMADEV_DEBUG
> > +     RTE_DMADEV_VALID_DEV_ID_OR_ERR_RET(dev_id, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(status, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(last_idx, -EINVAL);
> > +     RTE_FUNC_PTR_OR_ERR_RET(*dev->completed_fails, -ENOTSUP);
> > +     if (vchan >= dev->data->dev_conf.max_vchans) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid vchan %d\n", vchan);
> > +             return -EINVAL;
> > +     }
> > +     if (nb_status == 0) {
> > +             RTE_DMADEV_LOG(ERR, "Invalid nb_status\n");
> > +             return -EINVAL;
> > +     }
> > +#endif
> > +     return (*dev->completed_fails)(dev, vchan, nb_status, status, last_idx);
> > +}
> > +
> > +#ifdef __cplusplus
> > +}
> > +#endif
> > +
> > +#endif /* _RTE_DMADEV_H_ */
> > diff --git a/lib/dmadev/rte_dmadev_core.h b/lib/dmadev/rte_dmadev_core.h
> > new file mode 100644
> > index 0000000..410faf0
> > --- /dev/null
> > +++ b/lib/dmadev/rte_dmadev_core.h
> > @@ -0,0 +1,159 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2021 HiSilicon Limited.
> > + * Copyright(c) 2021 Intel Corporation.
> > + */
> > +
> > +#ifndef _RTE_DMADEV_CORE_H_
> > +#define _RTE_DMADEV_CORE_H_
> > +
> > +/**
> > + * @file
> > + *
> > + * RTE DMA Device internal header.
> > + *
> > + * This header contains internal data types, that are used by the DMA devices
> > + * in order to expose their ops to the class.
> > + *
> > + * Applications should not use these API directly.
> > + *
> > + */
> > +
> > +struct rte_dmadev;
> > +
> > +/** @internal Used to get device information of a device. */
> > +typedef int (*dmadev_info_get_t)(struct rte_dmadev *dev,
> > +                              struct rte_dmadev_info *dev_info);
>
> First parameter can be "const"
>
> > +/** @internal Used to configure a device. */
> > +typedef int (*dmadev_configure_t)(struct rte_dmadev *dev,
> > +                               const struct rte_dmadev_conf *dev_conf);
> > +
> > +/** @internal Used to start a configured device. */
> > +typedef int (*dmadev_start_t)(struct rte_dmadev *dev);
> > +
> > +/** @internal Used to stop a configured device. */
> > +typedef int (*dmadev_stop_t)(struct rte_dmadev *dev);
> > +
> > +/** @internal Used to close a configured device. */
> > +typedef int (*dmadev_close_t)(struct rte_dmadev *dev);
> > +
> > +/** @internal Used to reset a configured device. */
> > +typedef int (*dmadev_reset_t)(struct rte_dmadev *dev);
> > +
> > +/** @internal Used to allocate and set up a virtual DMA channel. */
> > +typedef int (*dmadev_vchan_setup_t)(struct rte_dmadev *dev,
> > +                                 const struct rte_dmadev_vchan_conf *conf);
> > +
> > +/** @internal Used to release a virtual DMA channel. */
> > +typedef int (*dmadev_vchan_release_t)(struct rte_dmadev *dev, uint16_t vchan);
> > +
> > +/** @internal Used to retrieve basic statistics. */
> > +typedef int (*dmadev_stats_get_t)(struct rte_dmadev *dev, int vchan,
> > +                               struct rte_dmadev_stats *stats);
>
> First parameter can be "const"
>
> > +
> > +/** @internal Used to reset basic statistics. */
> > +typedef int (*dmadev_stats_reset_t)(struct rte_dmadev *dev, int vchan);
> > +
> > +/** @internal Used to dump internal information. */
> > +typedef int (*dmadev_dump_t)(struct rte_dmadev *dev, FILE *f);
> > +
>
> First param "const"
>
> > +/** @internal Used to start dmadev selftest. */
> > +typedef int (*dmadev_selftest_t)(uint16_t dev_id);
> > +
>
> This looks an outlier taking a dev_id. It should take a rawdev parameter.
> Most drivers should not need to implement this anyway, as the main unit
> tests should be in "test_dmadev.c" in the autotest app.
>
> > +/** @internal Used to enqueue a copy operation. */
> > +typedef int (*dmadev_copy_t)(struct rte_dmadev *dev, uint16_t vchan,
> > +                          rte_iova_t src, rte_iova_t dst,
> > +                          uint32_t length, uint64_t flags);
> > +
> > +/** @internal Used to enqueue a scatter list copy operation. */
> > +typedef int (*dmadev_copy_sg_t)(struct rte_dmadev *dev, uint16_t vchan,
> > +                             const struct rte_dma_sg *sg,
> > +                             uint32_t sg_len, uint64_t flags);
> > +
> > +/** @internal Used to enqueue a fill operation. */
> > +typedef int (*dmadev_fill_t)(struct rte_dmadev *dev, uint16_t vchan,
> > +                          uint64_t pattern, rte_iova_t dst,
> > +                          uint32_t length, uint64_t flags);
> > +
> > +/** @internal Used to enqueue a scatter list fill operation. */
> > +typedef int (*dmadev_fill_sg_t)(struct rte_dmadev *dev, uint16_t vchan,
> > +                     uint64_t pattern, const struct rte_dma_sg *sg,
> > +                     uint32_t sg_len, uint64_t flags);
> > +
> > +/** @internal Used to trigger hardware to begin working. */
> > +typedef int (*dmadev_submit_t)(struct rte_dmadev *dev, uint16_t vchan);
> > +
> > +/** @internal Used to return number of successful completed operations. */
> > +typedef uint16_t (*dmadev_completed_t)(struct rte_dmadev *dev, uint16_t vchan,
> > +                                    const uint16_t nb_cpls,
> > +                                    uint16_t *last_idx, bool *has_error);
> > +
> > +/** @internal Used to return number of failed completed operations. */
> > +typedef uint16_t (*dmadev_completed_fails_t)(struct rte_dmadev *dev,
> > +                     uint16_t vchan, const uint16_t nb_status,
> > +                     uint32_t *status, uint16_t *last_idx);
> > +
> > +/**
> > + * DMA device operations function pointer table
> > + */
> > +struct rte_dmadev_ops {
> > +     dmadev_info_get_t dev_info_get;
> > +     dmadev_configure_t dev_configure;
> > +     dmadev_start_t dev_start;
> > +     dmadev_stop_t dev_stop;
> > +     dmadev_close_t dev_close;
> > +     dmadev_reset_t dev_reset;
> > +     dmadev_vchan_setup_t vchan_setup;
> > +     dmadev_vchan_release_t vchan_release;
> > +     dmadev_stats_get_t stats_get;
> > +     dmadev_stats_reset_t stats_reset;
> > +     dmadev_dump_t dev_dump;
> > +     dmadev_selftest_t dev_selftest;
> > +};
> > +
> > +/**
> > + * @internal
> > + * The data part, with no function pointers, associated with each DMA device.
> > + *
> > + * This structure is safe to place in shared memory to be common among different
> > + * processes in a multi-process configuration.
> > + */
> > +struct rte_dmadev_data {
> > +     uint16_t dev_id; /**< Device [external] identifier. */
> > +     char dev_name[RTE_DMADEV_NAME_MAX_LEN]; /**< Unique identifier name */
> > +     void *dev_private; /**< PMD-specific private data. */
> > +     struct rte_dmadev_conf dev_conf; /**< DMA device configuration. */
> > +     uint8_t dev_started : 1; /**< Device state: STARTED(1)/STOPPED(0). */
> > +     uint64_t reserved[4]; /**< Reserved for future fields */
> > +} __rte_cache_aligned;
> > +
>
> While I generally don't like having reserved space, this is one place where
> it makes sense, so +1 for it here.
>
> > +/**
> > + * @internal
> > + * The generic data structure associated with each DMA device.
> > + *
> > + * The dataplane APIs are located at the beginning of the structure, along
> > + * with the pointer to where all the data elements for the particular device
> > + * are stored in shared memory. This split scheme allows the function pointer
> > + * and driver data to be per-process, while the actual configuration data for
> > + * the device is shared.
> > + */
> > +struct rte_dmadev {
> > +     dmadev_copy_t copy;
> > +     dmadev_copy_sg_t copy_sg;
> > +     dmadev_fill_t fill;
> > +     dmadev_fill_sg_t fill_sg;
> > +     dmadev_submit_t submit;
> > +     dmadev_completed_t completed;
> > +     dmadev_completed_fails_t completed_fails;
> > +     const struct rte_dmadev_ops *dev_ops; /**< Functions exported by PMD. */
> > +     /** Flag indicating the device is attached: ATTACHED(1)/DETACHED(0). */
> > +     uint8_t attached : 1;
>
> Since it's in the midst of a series of pointers, this 1-bit flag is
> actually using 8-bytes of space. Is it needed. Can we use dev_ops == NULL
> or data == NULL instead to indicate this is a valid entry?
>
> > +     /** Device info which supplied during device initialization. */
> > +     struct rte_device *device;
> > +     struct rte_dmadev_data *data; /**< Pointer to device data. */
>
> If we are to try and minimise cacheline access, we should put this data
> pointer - or even better a copy of data->private pointer - at the top of
> the structure on the same cacheline as datapath operations. For dataplane,
> I can't see any elements of data, except the private pointer being
> accessed, so we would probably get most benefit for having a copy put there
> on init of the dmadev struct.
>
> > +     uint64_t reserved[4]; /**< Reserved for future fields */
> > +} __rte_cache_aligned;
> > +
> > +extern struct rte_dmadev rte_dmadevices[];
> > +
> > +#endif /* _RTE_DMADEV_CORE_H_ */
> > diff --git a/lib/dmadev/rte_dmadev_pmd.h b/lib/dmadev/rte_dmadev_pmd.h
> > new file mode 100644
> > index 0000000..45141f9
> > --- /dev/null
> > +++ b/lib/dmadev/rte_dmadev_pmd.h
> > @@ -0,0 +1,72 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2021 HiSilicon Limited.
> > + */
> > +
> > +#ifndef _RTE_DMADEV_PMD_H_
> > +#define _RTE_DMADEV_PMD_H_
> > +
> > +/**
> > + * @file
> > + *
> > + * RTE DMA Device PMD APIs
> > + *
> > + * Driver facing APIs for a DMA device. These are not to be called directly by
> > + * any application.
> > + */
> > +
> > +#include "rte_dmadev.h"
> > +
> > +#ifdef __cplusplus
> > +extern "C" {
> > +#endif
> > +
> > +/**
> > + * @internal
> > + * Allocates a new dmadev slot for an DMA device and returns the pointer
> > + * to that slot for the driver to use.
> > + *
> > + * @param name
> > + *   DMA device name.
> > + *
> > + * @return
> > + *   A pointer to the DMA device slot case of success,
> > + *   NULL otherwise.
> > + */
> > +__rte_internal
> > +struct rte_dmadev *
> > +rte_dmadev_pmd_allocate(const char *name);
> > +
> > +/**
> > + * @internal
> > + * Release the specified dmadev.
> > + *
> > + * @param dev
> > + *   Device to be released.
> > + *
> > + * @return
> > + *   - 0 on success, negative on error
> > + */
> > +__rte_internal
> > +int
> > +rte_dmadev_pmd_release(struct rte_dmadev *dev);
> > +
> > +/**
> > + * @internal
> > + * Return the DMA device based on the device name.
> > + *
> > + * @param name
> > + *   DMA device name.
> > + *
> > + * @return
> > + *   A pointer to the DMA device slot case of success,
> > + *   NULL otherwise.
> > + */
> > +__rte_internal
> > +struct rte_dmadev *
> > +rte_dmadev_get_device_by_name(const char *name);
> > +
> > +#ifdef __cplusplus
> > +}
> > +#endif
> > +
> > +#endif /* _RTE_DMADEV_PMD_H_ */
> > diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map
> > new file mode 100644
> > index 0000000..0f099e7
> > --- /dev/null
> > +++ b/lib/dmadev/version.map
> > @@ -0,0 +1,40 @@
> > +EXPERIMENTAL {
> > +     global:
> > +
> > +     rte_dmadev_count;
> > +     rte_dmadev_info_get;
> > +     rte_dmadev_configure;
> > +     rte_dmadev_start;
> > +     rte_dmadev_stop;
> > +     rte_dmadev_close;
> > +     rte_dmadev_reset;
> > +     rte_dmadev_vchan_setup;
> > +     rte_dmadev_vchan_release;
> > +     rte_dmadev_stats_get;
> > +     rte_dmadev_stats_reset;
> > +     rte_dmadev_dump;
> > +     rte_dmadev_selftest;
> > +     rte_dmadev_copy;
> > +     rte_dmadev_copy_sg;
> > +     rte_dmadev_fill;
> > +     rte_dmadev_fill_sg;
> > +     rte_dmadev_submit;
> > +     rte_dmadev_completed;
> > +     rte_dmadev_completed_fails;
> > +
> > +     local: *;
> > +};
>
> The elements in the version.map file blocks should be sorted alphabetically.
>
> > +
> > +INTERNAL {
> > +        global:
> > +
> > +     rte_dmadevices;
> > +     rte_dmadev_pmd_allocate;
> > +     rte_dmadev_pmd_release;
> > +     rte_dmadev_get_device_by_name;
> > +
> > +     local:
> > +
> > +     rte_dmadev_is_valid_dev;
> > +};
> > +
> > diff --git a/lib/meson.build b/lib/meson.build
> > index 1673ca4..68d239f 100644
> > --- a/lib/meson.build
> > +++ b/lib/meson.build
> > @@ -60,6 +60,7 @@ libraries = [
> >          'bpf',
> >          'graph',
> >          'node',
> > +        'dmadev',
> >  ]
> >
> >  if is_windows
> > --
> > 2.8.1
> >

  reply	other threads:[~2021-07-13  9:07 UTC|newest]

Thread overview: 339+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-02 13:18 [dpdk-dev] [PATCH] " Chengwen Feng
2021-07-02 13:59 ` Bruce Richardson
2021-07-04  9:30 ` Jerin Jacob
2021-07-05 10:52   ` Bruce Richardson
2021-07-05 11:12     ` Morten Brørup
2021-07-05 13:44       ` Bruce Richardson
2021-07-05 15:55     ` Jerin Jacob
2021-07-05 17:16       ` Bruce Richardson
2021-07-07  8:08         ` Jerin Jacob
2021-07-07  8:35           ` Bruce Richardson
2021-07-07 10:34             ` Jerin Jacob
2021-07-07 11:01               ` Bruce Richardson
2021-07-08  3:11                 ` fengchengwen
2021-07-08 18:35                   ` Jerin Jacob
2021-07-09  9:14                     ` Bruce Richardson
2021-07-11  7:14                       ` Jerin Jacob
2021-07-12  7:01                         ` Morten Brørup
2021-07-12  7:59                           ` Jerin Jacob
2021-07-06  8:20     ` fengchengwen
2021-07-06  9:27       ` Bruce Richardson
2021-07-06  3:01   ` fengchengwen
2021-07-06 10:01     ` Bruce Richardson
2021-07-04 14:57 ` Andrew Rybchenko
2021-07-06  3:56   ` fengchengwen
2021-07-06 10:02     ` Bruce Richardson
2021-07-04 15:21 ` Matan Azrad
2021-07-06  6:25   ` fengchengwen
2021-07-06  6:50     ` Matan Azrad
2021-07-06  9:08       ` fengchengwen
2021-07-06  9:17         ` Matan Azrad
2021-07-06 20:28 ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 1/9] dmadev: add missing exports Bruce Richardson
2021-07-07  8:26     ` David Marchand
2021-07-07  8:36       ` Bruce Richardson
2021-07-07  8:57         ` David Marchand
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 2/9] dmadev: change virtual addresses to IOVA Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 3/9] dmadev: add dump function Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 4/9] dmadev: remove xstats functions Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 5/9] dmadev: drop cookie typedef Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 6/9] dmadev: allow NULL parameters to completed ops call Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 7/9] dmadev: stats structure updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 8/9] drivers: add dma driver category Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 9/9] app/test: add basic dmadev unit test Bruce Richardson
2021-07-07  3:16   ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates fengchengwen
2021-07-07  8:11     ` Bruce Richardson
2021-07-07  8:14     ` Bruce Richardson
2021-07-07 10:42     ` Jerin Jacob
2021-07-11  9:25 ` [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library Chengwen Feng
2021-07-11  9:42   ` fengchengwen
2021-07-11 13:34     ` Jerin Jacob
2021-07-12  7:40       ` Morten Brørup
2021-07-11 14:25   ` Jerin Jacob
2021-07-12  7:15   ` Morten Brørup
2021-07-12  9:59   ` Jerin Jacob
2021-07-12 13:32     ` Bruce Richardson
2021-07-12 16:34       ` Jerin Jacob
2021-07-12 17:00         ` Bruce Richardson
2021-07-13  8:59           ` Jerin Jacob
2021-07-12 12:05   ` Bruce Richardson
2021-07-12 15:50   ` Bruce Richardson
2021-07-13  9:07     ` Jerin Jacob [this message]
2021-07-13 14:19   ` Ananyev, Konstantin
2021-07-13 14:28     ` Bruce Richardson
2021-07-13 12:27 ` [dpdk-dev] [PATCH v3] " Chengwen Feng
2021-07-13 13:06   ` fengchengwen
2021-07-13 13:37     ` Bruce Richardson
2021-07-15  6:44       ` Jerin Jacob
2021-07-15  8:25         ` Bruce Richardson
2021-07-15  9:49           ` Jerin Jacob
2021-07-15 10:00             ` Bruce Richardson
2021-07-13 16:02   ` Bruce Richardson
2021-07-14 12:22   ` Nipun Gupta
2021-07-15  8:29     ` fengchengwen
2021-07-15 11:16       ` Nipun Gupta
2021-07-15 12:11         ` Bruce Richardson
2021-07-15 12:31           ` Jerin Jacob
2021-07-15 12:34             ` Nipun Gupta
2021-07-14 16:05   ` Bruce Richardson
2021-07-15  7:10   ` Jerin Jacob
2021-07-15  9:03     ` Bruce Richardson
2021-07-15  9:30       ` Jerin Jacob
2021-07-15 10:03         ` Bruce Richardson
2021-07-15 10:05           ` Bruce Richardson
2021-07-15 15:41 ` [dpdk-dev] [PATCH v4] " Chengwen Feng
2021-07-15 16:04   ` fengchengwen
2021-07-15 16:33     ` Bruce Richardson
2021-07-16  3:04       ` fengchengwen
2021-07-16  9:50         ` Bruce Richardson
2021-07-16 12:34           ` Jerin Jacob
2021-07-16 12:40         ` Jerin Jacob
2021-07-16 12:48           ` Bruce Richardson
2021-07-16 12:54     ` Jerin Jacob
2021-07-16  2:45 ` [dpdk-dev] [PATCH v5] " Chengwen Feng
2021-07-16 13:20   ` Jerin Jacob
2021-07-16 14:41   ` Bruce Richardson
2021-07-19  3:29 ` [dpdk-dev] [PATCH v6] " Chengwen Feng
2021-07-19  6:21   ` Jerin Jacob
2021-07-19 13:20     ` fengchengwen
2021-07-19 13:36       ` Jerin Jacob
2021-07-19 13:05 ` [dpdk-dev] [PATCH v7] " Chengwen Feng
2021-07-20  1:14 ` [dpdk-dev] [PATCH v8] " Chengwen Feng
2021-07-20  5:03   ` Jerin Jacob
2021-07-20  6:53     ` fengchengwen
2021-07-20  9:43       ` Jerin Jacob
2021-07-20 10:13       ` Bruce Richardson
2021-07-20 11:12 ` [dpdk-dev] [PATCH v9] " Chengwen Feng
2021-07-20 12:05   ` Bruce Richardson
2021-07-20 12:46 ` [dpdk-dev] [PATCH v10] " Chengwen Feng
2021-07-26  6:53   ` fengchengwen
2021-07-26  8:31     ` Bruce Richardson
2021-07-27  3:57       ` fengchengwen
2021-07-26 11:03     ` Morten Brørup
2021-07-26 11:21       ` Jerin Jacob
2021-07-27  3:39 ` [dpdk-dev] [PATCH v11 0/2] support dmadev Chengwen Feng
2021-07-27  3:39   ` [dpdk-dev] [PATCH v11 1/2] dmadev: introduce DMA device library Chengwen Feng
2021-07-28 11:13     ` Bruce Richardson
2021-07-29  1:26       ` fengchengwen
2021-07-29  9:15         ` Bruce Richardson
2021-07-29 13:33           ` fengchengwen
2021-07-29 10:44         ` Jerin Jacob
2021-07-29 13:30           ` fengchengwen
2021-07-27  3:40   ` [dpdk-dev] [PATCH v11 2/2] doc: add dmadev library guide Chengwen Feng
2021-07-29 11:02     ` Jerin Jacob
2021-07-29 13:13       ` fengchengwen
2021-07-29 13:28         ` fengchengwen
2021-07-29 13:06 ` [dpdk-dev] [PATCH v12 0/6] support dmadev Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 5/6] doc: add DMA device library guide Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:29 ` [dpdk-dev] [PATCH v13 0/6] support dmadev Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-05 12:56     ` Walsh, Conor
2021-08-05 13:12       ` fengchengwen
2021-08-05 13:44         ` Conor Walsh
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-03 14:55     ` Jerin Jacob
2021-08-05 13:15       ` fengchengwen
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:46   ` [dpdk-dev] [PATCH v13 0/6] support dmadev fengchengwen
2021-08-10 11:54 ` [dpdk-dev] [PATCH v14 " Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-10 15:27     ` Walsh, Conor
2021-08-11  0:47       ` fengchengwen
2021-08-13  9:20       ` fengchengwen
2021-08-13 10:12         ` Walsh, Conor
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-13  9:09 ` [dpdk-dev] [PATCH v15 0/6] support dmadev Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-19 14:52     ` Bruce Richardson
2021-08-23  3:43       ` fengchengwen
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-23  3:31 ` [dpdk-dev] [PATCH v16 0/9] support dmadev Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 1/9] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 2/9] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 3/9] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 4/9] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 5/9] doc: add DMA device library guide Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 6/9] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-26 18:39     ` Bruce Richardson
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 7/9] dma/skeleton: add test cases Chengwen Feng
2021-08-23 14:03     ` Bruce Richardson
2021-08-26  9:30       ` fengchengwen
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 8/9] test: enable dmadev skeleton test Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 9/9] maintainers: add for dmadev Chengwen Feng
2021-08-28  7:29 ` [dpdk-dev] [PATCH v17 0/8] support dmadev Chengwen Feng
2021-08-28  7:29   ` [dpdk-dev] [PATCH v17 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 5/8] doc: add DMA device library guide Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 7/8] app/test: add dmadev API test Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 8/8] maintainers: add for dmadev Chengwen Feng
2021-08-28  8:25     ` fengchengwen
2021-08-30  8:19       ` Bruce Richardson
2021-09-02 10:54 ` [dpdk-dev] [PATCH v18 0/8] support dmadev Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 5/8] doc: add DMA device library guide Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 7/8] app/test: add dmadev API test Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 8/8] maintainers: add for dmadev Chengwen Feng
2021-09-02 11:51     ` Bruce Richardson
2021-09-02 13:39       ` fengchengwen
2021-09-03 12:59         ` Maxime Coquelin
2021-09-04  7:02           ` fengchengwen
2021-09-06  1:46             ` Li, Xiaoyun
2021-09-06  8:00               ` fengchengwen
2021-09-06  2:03           ` Xia, Chenbo
2021-09-06  8:01             ` fengchengwen
2021-09-02 13:13 ` [dpdk-dev] [PATCH v19 0/7] support dmadev Chengwen Feng
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-03 11:42     ` Gagandeep Singh
2021-09-04  1:31       ` fengchengwen
2021-09-06  6:48         ` Gagandeep Singh
2021-09-06  7:52           ` fengchengwen
2021-09-06  8:06             ` Jerin Jacob
2021-09-06  8:08             ` Bruce Richardson
2021-09-07 12:55             ` fengchengwen
2021-09-03 13:03     ` Bruce Richardson
2021-09-04  3:05       ` fengchengwen
2021-09-04 10:10       ` Morten Brørup
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:30       ` Bruce Richardson
2021-09-03 15:35     ` Conor Walsh
2021-09-04  8:52       ` fengchengwen
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-03 15:14     ` Kevin Laatz
2021-09-04  7:17       ` fengchengwen
2021-09-03 15:36     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-02 14:11     ` Walsh, Conor
2021-09-03  0:39       ` fengchengwen
2021-09-03 15:38         ` Walsh, Conor
2021-09-04  7:22           ` fengchengwen
2021-09-03 15:14     ` Kevin Laatz
2021-09-04 10:10 ` [dpdk-dev] [PATCH v20 0/7] support dmadev Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-06 13:35     ` Bruce Richardson
2021-09-07 13:05       ` fengchengwen
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-04 10:17     ` Jerin Jacob
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-06 13:37   ` [dpdk-dev] [PATCH v20 0/7] support dmadev Bruce Richardson
2021-09-07 12:56 ` [dpdk-dev] [PATCH v21 " Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-09 10:33     ` Thomas Monjalon
2021-09-09 11:18       ` Bruce Richardson
2021-09-09 11:29         ` Thomas Monjalon
2021-09-09 12:45           ` Bruce Richardson
2021-09-09 13:54             ` fengchengwen
2021-09-09 14:26               ` Thomas Monjalon
2021-09-09 14:31                 ` Bruce Richardson
2021-09-09 14:28               ` Bruce Richardson
2021-09-09 15:12                 ` Morten Brørup
2021-09-09 13:33       ` fengchengwen
2021-09-09 14:19         ` Thomas Monjalon
2021-09-16  3:57       ` fengchengwen
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-08  9:54     ` Walsh, Conor
2021-09-09 13:25       ` fengchengwen
2021-09-15 13:51     ` Kevin Laatz
2021-09-15 14:34       ` Bruce Richardson
2021-09-15 14:47         ` Kevin Laatz
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-16  3:41 ` [dpdk-dev] [PATCH v22 0/5] support dmadev Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 1/5] dmadev: introduce DMA device library Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 2/5] dmadev: add control plane function support Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 3/5] dmadev: add data " Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 4/5] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 5/5] app/test: add dmadev API test Chengwen Feng
2021-09-24 10:53 ` [dpdk-dev] [PATCH v23 0/6] support dmadev Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-04 21:12     ` Radha Mohan
2021-10-05  8:24       ` Kevin Laatz
2021-10-05 16:39         ` Radha Mohan
2021-10-08  1:52       ` fengchengwen
2021-10-06 10:26     ` Thomas Monjalon
2021-10-08  7:13       ` fengchengwen
2021-10-08 10:09         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 2/6] dmadev: add control plane function support Chengwen Feng
2021-10-05 10:16     ` Matan Azrad
2021-10-08  3:28       ` fengchengwen
2021-10-06 10:46     ` Thomas Monjalon
2021-10-08  7:55       ` fengchengwen
2021-10-08 10:18         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 3/6] dmadev: add data " Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 4/6] dmadev: add multi-process support Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-09  9:33 ` [dpdk-dev] [PATCH v24 0/6] support dmadev Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 3/6] dmadev: add data " Chengwen Feng
2021-10-09 10:03     ` fengchengwen
2021-10-11 10:40     ` Bruce Richardson
2021-10-11 12:31       ` fengchengwen
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-11  7:33 ` [dpdk-dev] [PATCH v25 0/6] support dmadev Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-12 19:09     ` Thomas Monjalon
2021-10-13  0:21       ` fengchengwen
2021-10-13  7:41         ` Thomas Monjalon
2021-10-15  8:29           ` Thomas Monjalon
2021-10-15  9:59             ` fengchengwen
2021-10-15 13:46               ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-11 15:44     ` Bruce Richardson
2021-10-12  3:57       ` fengchengwen
2021-10-12 18:57     ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 3/6] dmadev: add data " Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-13 12:24 ` [dpdk-dev] [PATCH v26 0/6] support dmadev Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 3/6] dmadev: add data " Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-13 12:25   ` [dpdk-dev] [PATCH v26 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-17 19:17   ` [dpdk-dev] [PATCH v26 0/6] support dmadev Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALBAE1NPGwJLDB95NEm+MFuJUDy6CeVOXF6EdpHqtibMXE+GmA@mail.gmail.com \
    --to=jerinjacobk@gmail.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=fengchengwen@huawei.com \
    --cc=ferruh.yigit@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=honnappa.nagarahalli@arm.com \
    --cc=jerinj@marvell.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=liangma@liangbit.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mb@smartsharesystems.com \
    --cc=nipun.gupta@nxp.com \
    --cc=pkapoor@marvell.com \
    --cc=sburla@marvell.com \
    --cc=thomas@monjalon.net \
    --subject='Re: [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.