And here's a screenshot of the device info in Windows: On Tue, Mar 28, 2017 at 3:13 AM, M K wrote: > Hi Johnny, > > Did you mean to add the {.driver_data...} to a static in i2c-hid.c, or > in hid-multitouch.c? If so, where? After downloading the kernel > source and building these modules, it looks to me like > hid-multitouch.c is its own module (part of the Makefile for > "M=drivers/hid") separate from i2c-hid ("M=drivers/hid/i2c-hid") > > Also, the comments in hid-multitouch.c state that definitions for > items using MT_CLS_DEFAULT don't do anything. Finally, what device > type should I use? The code you provided won't compile, because the > HID_DEVICE() macro expects another argument. I presume this would be > "HID_GROUP_MULTITOUCH" ? > > After trying the above, I recompiled the two modules and re-installed > them in my kernel using modprobe. However, I could find no evidence > that the ELAN0732 device was actually detected as an input device (cat > /proc/bus/input/devices, and xinput both don't show anything new). I > also tried rebooting (however, neither of these modules is in the > standard initramfs for Arch Linux, so I don't think rebooting is > necessary). > > Any other ideas? > > Also, here's a snippet of the DxDiag report from Windows..for this > vendor ID, it lists 4 devices (0x2B28)...not sure if this is the same > piece of hardware or not: > "------------------- > DirectInput Devices > ------------------- > Device Name: Mouse > Attached: 1 > Controller ID: n/a > Vendor/Product ID: n/a > FF Driver: n/a > > Device Name: Keyboard > Attached: 1 > Controller ID: n/a > Vendor/Product ID: n/a > FF Driver: n/a > > Device Name: HIDI2C Device > Attached: 1 > Controller ID: 0x0 > Vendor/Product ID: 0x04F3, 0x2B28 > FF Driver: n/a > > Device Name: HIDI2C Device > Attached: 1 > Controller ID: 0x0 > Vendor/Product ID: 0x04F3, 0x2B28 > FF Driver: n/a > > Device Name: HIDI2C Device > Attached: 1 > Controller ID: 0x0 > Vendor/Product ID: 0x04F3, 0x2B28 > FF Driver: n/a > > Device Name: HIDI2C Device > Attached: 1 > Controller ID: 0x0 > Vendor/Product ID: 0x04F3, 0x2B28 > FF Driver: n/a > > Device Name: HP Wireless Button Driver > Attached: 1 > Controller ID: 0x0 > Vendor/Product ID: 0x0001, 0x0001 > FF Driver: n/a > > Device Name: ST_SENSOR_HUB > Attached: 1 > Controller ID: 0x0 > Vendor/Product ID: 0x0483, 0x91D1 > FF Driver: n/a > > Poll w/ Interrupt: No > > -----------" > > > > > Thanks, > > MK > > > On Mon, Mar 27, 2017 at 10:06 PM, Johnny.Chuang > wrote: >> Hi Dmitry, >> >> Sorry for late response. >> >> ELAN0732 is hid over i2c touch screen device. >> There is a compatible linux inbox driver which is drivers/hid/i2c-hid/i2c-hid.c. >> Please make i2c-hid.c as build-in driver or module. >> >> And please also add VID/PID at hid-ids.h and hid-multitouch.c >> drivers/hid/hid-ids.h >> #define USB_VENDOR_ID_ELAN 0x04f3 >> #define USB_DEVICE_ID_ELAN_A 0x0732 >> #define USB_DEVICE_ID_ELAN_B 0x000b >> drivers/hid/hid-multitouch.c >> /* Elan i2c-hid TouchSystems panel */ >> { .driver_data = MT_CLS_DEFAULT, >> HID_DEVICE(BUS_I2C, USB_VENDOR_ID_ELAN, >> USB_DEVICE_ID_ELAN_A) }, >> >> Many thanks, >> Johnny >> -----Original Message----- >> From: 廖崇榮 [mailto:kt.liao@emc.com.tw] >> Sent: Tuesday, March 21, 2017 1:55 PM >> To: 'Dmitry Torokhov'; 'M K' >> Cc: linux-input@vger.kernel.org; 'ELAN 劉嘉駿'; 'Johnny.Chuang' >> Subject: RE: ELAN0732 I2C Touchscreen Driver >> >> Add Johnny who handle ELAN touchscreen in loop. >> >> -----Original Message----- >> From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com] >> Sent: Tuesday, March 21, 2017 12:45 PM >> To: M K; 廖崇榮 >> Cc: linux-input@vger.kernel.org; ELAN 劉嘉駿 >> Subject: Re: ELAN0732 I2C Touchscreen Driver >> >> On Sun, Mar 19, 2017 at 11:26 PM, M K wrote: >>> Is there a compatible driver for this device? I've tried loading >>> various modules with no success (elants_i2c, hid_multitouch, etc.). >>> >>> The device shows up under /sys/bus/i2c/devices/i2c-ELAN0732:00 >> >> You would need to add "ELAN0732" to elants_i2c_id table for elants_i2c to load and bind to the device. >> >>> >>> However, xinput does not list it at all. >>> >>> This is an HP m6-ar004dx laptop (Envy x360) with touchscreen display, >>> and AMD FX-9800P processor. >>> >>> Scott Liu suggested I try posting here. >> >> Hmm, I'd expect Scott to know if elants_i2c could theoretically drive this device. KT, do you know by chance? >> Hi Johnny, >> Could you help to check this TS issue >> Thanks. >> >> -- >> Dmitry >>