From mboxrd@z Thu Jan  1 00:00:00 1970
From: William Morgan <therealbrewer@gmail.com>
Subject: Need help with degraded raid 5
Date: Wed, 4 Mar 2020 18:31:21 -0600
Message-ID: <CALc6PW74+m1tk4BGgyQRCcx1cU5W=DKWL1mq7EpriW6s=JajVg@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Return-path: <linux-raid-owner@vger.kernel.org>
Sender: linux-raid-owner@vger.kernel.org
To: linux-raid@vger.kernel.org
List-Id: linux-raid.ids

Hello,

I'm working with a 4 disk raid 5. In the past I have experienced a
problem that resulted in the array being set to "inactive", but with
some guidance from the list, I was able to rebuild with no loss of
data. Recently I have a slightly different situation where one disk
was "removed" and marked as "spare", so the array is still active, but
degraded.

I've been monitoring the array, and I got a "Fail event" notification
right after a power blip which showed this mdstat:

Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5]
[raid4] [raid10]
md0 : active raid5 sdm1[4](F) sdj1[0] sdk1[1] sdl1[2]
      23441679360 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
      bitmap: 0/59 pages [0KB], 65536KB chunk

unused devices: <none>

A little while later I got a "DegradedArray event" notification with
the following mdstat:

Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0]
[raid1] [raid10]
md0 : active raid5 sdl1[4] sdj1[1] sdk1[2] sdi1[0]
      23441679360 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
      [>....................]  recovery =  0.0% (12600/7813893120)
finish=113621.8min speed=1145K/sec
      bitmap: 2/59 pages [8KB], 65536KB chunk

unused devices: <none>

which seemed to imply that sdl was being rebuilt, but then I got
another "DegradedArray event" notification with this:

Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0]
[raid1] [raid10]
md0 : active raid5 sdl1[4](S) sdj1[1] sdk1[2] sdi1[0]
      23441679360 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/3] [UUU_]
      bitmap: 2/59 pages [8KB], 65536KB chunk

unused devices: <none>


I don't think anything is really wrong with the removed disk however.
So assuming I've got backups, what do I need to do to reinsert the
disk and get the array back to a normal state? Or does that disk's
data need to be completely rebuilt? And how do I initiate that?

I'm using the latest mdadm and a very recent kernel. Currently I get this:

bill@bill-desk:~$ sudo mdadm --detail /dev/md0
/dev/md0:
           Version : 1.2
     Creation Time : Sat Sep 22 19:10:10 2018
        Raid Level : raid5
        Array Size : 23441679360 (22355.73 GiB 24004.28 GB)
     Used Dev Size : 7813893120 (7451.91 GiB 8001.43 GB)
      Raid Devices : 4
     Total Devices : 4
       Persistence : Superblock is persistent

     Intent Bitmap : Internal

       Update Time : Mon Mar  2 17:41:32 2020
             State : clean, degraded
    Active Devices : 3
   Working Devices : 4
    Failed Devices : 0
     Spare Devices : 1

            Layout : left-symmetric
        Chunk Size : 64K

Consistency Policy : bitmap

              Name : bill-desk:0  (local to host bill-desk)
              UUID : 06ad8de5:3a7a15ad:88116f44:fcdee150
            Events : 10407

    Number   Major   Minor   RaidDevice State
       0       8      129        0      active sync   /dev/sdi1
       1       8      145        1      active sync   /dev/sdj1
       2       8      161        2      active sync   /dev/sdk1
       -       0        0        3      removed

       4       8      177        -      spare   /dev/sdl1