From mboxrd@z Thu Jan  1 00:00:00 1970
From: Oscar Gomez Fuente <oscargomezf@gmail.com>
Date: Mon, 22 Oct 2018 09:25:19 +0200
Subject: [Buildroot] [PATCH 1/1] ntp: added S48ntpdate script
In-Reply-To: <CANQCQpZcDx+fdZmh6MZypVDCWU8JJbqR0XqqBDbC4T8HnNopXw@mail.gmail.com>
References: <1539964343-10526-1-git-send-email-oscargomezf@gmail.com>
 <CANQCQpZcDx+fdZmh6MZypVDCWU8JJbqR0XqqBDbC4T8HnNopXw@mail.gmail.com>
Message-ID: <CALtfCQZiF0jhNwSUXS+qgEN2oHhqkxwF56V31Ymp-_5LzcWD=Q@mail.gmail.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hi Matthew,


Thank you very much for your help.

I was checking If the script is working fine:
----->
#! /bin/sh

NAME=ntpd

# Read config file if it is present.
if [ -r /etc/default/$NAME ]
then
        . /etc/default/$NAME
fi

case "$1" in
        start)
                printf "Starting $NAME: "
                CURRENT_DATE=$(date | grep "1970")
                if [ "$CURRENT_DATE" != "" ]; then
                        /usr/sbin/ntpd -q -x
                        [ $?  != 0 ] && echo -n "(No initial time set) - "
                fi
                start-stop-daemon -S -q -x /usr/sbin/ntpd -- -g
                [ $? = 0 ] && echo "OK" || echo "FAIL"
                ;;
        stop)
                printf "Stopping $NAME: "
                start-stop-daemon -K -q -n $NAME
                [ $? = 0 ] && echo "OK" || echo "FAIL"
                ;;
        restart|reload)
                echo "Restarting $NAME: "
                $0 stop
                sleep 1
                $0 start
                ;;
        *)
                echo "Usage: $0 {start|stop|restart|reload}" >&2
                exit 1
                ;;
esac

exit 0
----->

But it seems to be that the command "/usr/sbin/ntpd -q -x" is not
working properly:

# date --set "1970-01-10 10:10:00"
Sat Jan 10 10:10:00 UTC 1970
# /etc/init.d/S49ntp restart
Restarting ntpd:
Stopping ntpd: OK
Starting ntpd: 10 Jan 10:10:04 ntpd[1859]: ntpd 4.2.8p12 at 1.3728-o Thu
Oct 18 16:16:56 UTC 2018 (1): Starting
10 Jan 10:10:04 ntpd[1859]: Command line: /usr/sbin/ntpd -q -x
10 Jan 10:10:04 ntpd[1859]: proto: precision = 1.718 usec (-19)
10 Jan 10:10:04 ntpd[1859]: Listen and drop on 0 v6wildcard [::]:123
10 Jan 10:10:04 ntpd[1859]: Listen and drop on 1 v4wildcard 0.0.0.0:123
10 Jan 10:10:04 ntpd[1859]: Listen normally on 2 lo 127.0.0.1:123
10 Jan 10:10:04 ntpd[1859]: Listen normally on 3 eth0 192.168.20.226:123
10 Jan 10:10:04 ntpd[1859]: Listen normally on 4 ppp0 172.21.39.120:123
10 Jan 10:10:04 ntpd[1859]: Listen normally on 5 lo [::1]:123
10 Jan 10:10:04 ntpd[1859]: Listen normally on 6 eth0
[xxxx::xxxx:xxxx:xxxx:xxxx%2]:123
10 Jan 10:10:04 ntpd[1859]: Listening on routing socket on fd #23 for
interface updates
(No initial time set) - OK

Notice that I checking the script forcing the date to 1970 with this
command. Does anyone any suggestion?


Best regards.