From: Yunhan Wang <yunhanw@google.com>
To: ERAMOTO Masaya <eramoto.masaya@jp.fujitsu.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH BlueZ] client: Fix default controller in interactive mode
Date: Thu, 31 Aug 2017 20:58:31 -0700 [thread overview]
Message-ID: <CALvjcs9kyaey8RbuxiGSYQAUuQrJpYc_nWO4cWdOQ0xic1Lo8Q@mail.gmail.com> (raw)
In-Reply-To: <a12789e7-54c1-2469-e12e-4235a2327432@jp.fujitsu.com>
Hi, Luiz and Eramoto
Thanks for comments. Just send the patch to address this issue. Please
kindly have a review.
Best wishes
Yunhan
On Thu, Aug 31, 2017 at 1:06 AM, ERAMOTO Masaya
<eramoto.masaya@jp.fujitsu.com> wrote:
> Hi Yunhan,
>
> Thanks for your reply.
>
> On 08/31/2017 02:02 PM, Yunhan Wang wrote:
>> Hi, ERAMOTO
>>
>> With this change, when second adapter is enumerated.
>> default_ctrl->ad_proxy would be assigned with advertising proxy from
>> second adapter, but default_ctrl->proxy is still first adapter proxy.
>
> I understood your commit 4e111f3448.
>
>> Yes, when there are two adapters, the newest adapter is chosen as
>> default one. It is not good when you have adapter A in test, and
>> later attach another adapter B. But if you make all adapters ready
>> before your test is running, then you can use "select" to choose the
>> default adapter.
>
> I worry about the case that bluetootctl is not run on test phase
> but on operation phase (end-users may attach adapters freely). In
> addition, now bluetoothctl seems to be inconsistent when adapters
> without advertising (e.g. with only BR/EDR) are used.
>
> Do you have any ideas how to fix this behavior? Or do not we need
> to worry about above?
>
>
> Regards,
> Eramoto
>
>> Thanks
>> Best wishes
>> Yunhan
>>
>> On Wed, Aug 30, 2017 at 9:23 PM, ERAMOTO Masaya
>> <eramoto.masaya@jp.fujitsu.com> wrote:
>>> Since 4e111f3448a126786f3620be1b5ce969456edc65, when a attached adapter
>>> is tried to operate in the interactive mode and another adapter is
>>> attached newly, the default controller is changed to the another adapter.
>>>
>>> In the interactive mode, because the default controller should change by
>>> select command, this patch fixes to not change the default controller
>>> when another adapter is attached.
>>> ---
>>> client/main.c | 11 ++++++++---
>>> 1 file changed, 8 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/client/main.c b/client/main.c
>>> index 825647d..7ab95dc 100644
>>> --- a/client/main.c
>>> +++ b/client/main.c
>>> @@ -527,9 +527,14 @@ static void device_added(GDBusProxy *proxy)
>>>
>>> static void adapter_added(GDBusProxy *proxy)
>>> {
>>> - default_ctrl = g_malloc0(sizeof(struct adapter));
>>> - default_ctrl->proxy = proxy;
>>> - ctrl_list = g_list_append(ctrl_list, default_ctrl);
>>> + struct adapter *adapter = g_malloc0(sizeof(struct adapter));
>>> +
>>> + adapter->proxy = proxy;
>>> + ctrl_list = g_list_append(ctrl_list, adapter);
>>> +
>>> + if (!default_ctrl)
>>> + default_ctrl = adapter;
>>> +
>>> print_adapter(proxy, COLORED_NEW);
>>> }
>>>
>>> --
>>> 2.7.4
>>>
>>
>>
>
next prev parent reply other threads:[~2017-09-01 3:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-31 4:23 [PATCH BlueZ] client: Fix default controller in interactive mode ERAMOTO Masaya
2017-08-31 5:02 ` Yunhan Wang
2017-08-31 8:06 ` ERAMOTO Masaya
2017-09-01 3:58 ` Yunhan Wang [this message]
2017-08-31 8:10 ` Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALvjcs9kyaey8RbuxiGSYQAUuQrJpYc_nWO4cWdOQ0xic1Lo8Q@mail.gmail.com \
--to=yunhanw@google.com \
--cc=eramoto.masaya@jp.fujitsu.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.