Hi Diego,

I may be wrong here, but I had a similar issue and I gave up. As I
understand from
https://www.yoctoproject.org/sites/yoctoproject.org/files/elc2013-kernel-lab.pdf
if you are not using the linux-yocto kernel you need the whole defconfig.
Anyway, reading the kernel lab is probably a good idea.

good luck,
Katu


2013/10/15 Diego Sueiro <diego.sueiro@gmail.com>

> Folks,
>
> I created the following bbapend recipe for linux-mainline_3.8.bb (from
> meta-beagleboard on dylan branch) for beaglebone.
> meta-mine/recipes-kernel/linux/linux-mainline_3.8.bbappend:
>
> FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
> SRC_URI += " file://0019-mine.patch \
>              file://defconfig \
>              "
>
> But the defconfig and .config files on ${S} and ${WORKDIR} used are from
> meta-beagleboad, not from my bbappend.
>
> I tried to follow the instructions to add config fragments on the page
> below but it did not worked too.
>
> http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.html#changing-the-configuration
>
> The strange thing is: My patch is applied but my defconfig, or config
> fragment is not used.
> I just want to add CONFIG_WATCHDOG_NOWAYOUT=y.
>
> I already did a cleasstate but no success.
>
> Any hints?
>
>
> Regards,
>
> --
> *dS
> Diego Sueiro
>
> /*long live rock 'n roll*/
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
>