From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: MIME-Version: 1.0 In-Reply-To: <15442021.aXYrkMLT6N@sven-edge> References: <24448293.C3avDh6gQR@sven-edge> <0F40DD26-09F6-4ED6-B0BC-7413FF5ED713@gmail.com> <15442021.aXYrkMLT6N@sven-edge> From: Sailash Moirangthem Date: Mon, 27 Jun 2016 12:58:24 +0530 Message-ID: Content-Type: text/plain; charset=UTF-8 Subject: Re: [B.A.T.M.A.N.] Adhoc0 Interface not showing up List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Sven Eckelmann Cc: b.a.t.m.a.n@lists.open-mesh.org Hi Sven, This question may sound dumb. But I need your help in this please. I upgraded my openwrt to the latest version 15.05. I then tried installing kmod-batman-adv. It gave me error: satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-batman-adv: kernel (= 3.18.14-1-406f55e08cbd4433be5683443e405921) * I followed the following steps: 1 . Note: If you downloaded an Openwrt release but intend to build the latest batman-adv package you might need to modify your feeds.conf(.default). Make sure you have "src-git routing git://github.com/openwrt-routing/packages.git" instead of e.g. "src-git routing git://github.com/openwrt-routing/packages.git;for-12.09.x". This doesnt seem to work. Can you please tell me the steps on how to install the latest batman-adv in my 15.05 openwrt firmware. Thanks a ton. Thanks, Sailash M On Sat, Jun 25, 2016 at 11:04 AM, Sven Eckelmann wrote: > On Saturday 25 June 2016 10:04:41 sailashm@gmail.com wrote: >> Hi Sven, >> >> I will give it a shot on monday and let you know. However, when using the > BATMAN-adv in my 5 tplink routers, the AP interface keeps disconnecting and is > not stable. The version of batman-adv is 14. Is this version of batman-adv > unstable? > > batman-adv with the COMPAT_VERSION 14 (used in v2011.3.0 <= batman-adv < > v2014.0.0) is either really old and unsupported (it has known problems which > fill not be fixed by us anymore).... or you are using batman-adv-legacy [1] > from Matthias Schiffer. If the latter is the case then please upgrade to the > latest version from him, test again and then contact him when you need support > for this version. > > But to be honest, batman-adv is not managing the AP interface and thus it > should have no influence on the AP interface authentication/deauthentication > behavior or the AP interface state. > > Kind regards, > Sven > > [1] https://github.com/freifunk-gluon/batman-adv-legacy