I might not get around to writing the fix myself, but, here's the COEF's from within Windows. I've marked the ones missing inside the main init function. So, if anyone else wants to add these in, feel free. On Wed, Sep 12, 2018 at 1:16 PM, Håvard wrote: > That was without running the program (sorry) > > This is output when running program: > > Before there was no "Current verb...." > They came when I opened up windows microphone settings. (something I didn't > do before) > > -Håvard > > Den ons. 12. sep. 2018 kl. 19:11 skrev Håvard : >> >> I think this is right! >> >> I first booted up, then tested speakers (That I could not hear) and then >> tested microphone (Which worked perfectly) in windows settings. >> >> (My first email was dissaproved as it was too large) >> >> Den ons. 12. sep. 2018 kl. 19:05 skrev Håvard : >>> >>> I think this is right! >>> >>> I first booted up, then tested speakers (That I could not hear) and then >>> tested microphone (Which worked perfectly) in windows settings. >>> >>> -Håvard >>> >>> Den ons. 12. sep. 2018 kl. 18:49 skrev Connor McAdams >>> : >>>> >>>> Also, sorry to keep sending more replies, make sure the only trace you >>>> have on is vfio_region_write, and not the read one. The read spams up >>>> the console. >>>> >>>> On Wed, Sep 12, 2018 at 12:43 PM, Connor McAdams >>>> wrote: >>>> > Reason being, it may not have identified the CORB buffer properly or >>>> > something. That's very odd to have no data. Never seen that before. >>>> > >>>> > On Wed, Sep 12, 2018 at 12:42 PM, Connor McAdams >>>> > wrote: >>>> >> Could you try again and make a copy of your terminal output? >>>> >> >>>> >> On Wed, Sep 12, 2018 at 12:41 PM, Håvard >>>> >> wrote: >>>> >>> Hi again. >>>> >>> Sorry for not noticing all files were empty, did it not run for long >>>> >>> enough? >>>> >>> >>>> >>> -Håvard >>>> >>> >>>> >>> Den ons. 12. sep. 2018 kl. 18:39 skrev Håvard >>>> >>> : >>>> >>>> >>>> >>>> Sorry my bad again it was working perfectly, just missed a step. >>>> >>>> >>>> >>>> I'll add the dumps as an attatchment. I had both external headset >>>> >>>> and >>>> >>>> microphone plugged in and let the VM run in the background for >>>> >>>> ~30min while >>>> >>>> doing other stuff. I did not play music or test my microphone in >>>> >>>> the VM >>>> >>>> either, If i did anything wrong, please tell me! >>>> >>>> >>>> >>>> It stopped at 0x104f4 >>>> >>>> >>>> >>>> -Håvard >>>> >>>> >>>> >>>> Den ons. 12. sep. 2018 kl. 00:31 skrev Connor McAdams >>>> >>>> : >>>> >>>>> >>>> >>>>> Hm.... that's odd. They should show up in the folder you ran the >>>> >>>>> command from. Does your console show any "DumpMem entered..." or >>>> >>>>> something like that? You may have a permissions error. I've had >>>> >>>>> some >>>> >>>>> people report that as an issue before. >>>> >>>>> >>>> >>>>> On Tue, Sep 11, 2018 at 5:08 PM, Håvard >>>> >>>>> wrote: >>>> >>>>> > Hi! >>>> >>>>> > >>>> >>>>> > Took a while, but I think I got it working. Did not see any >>>> >>>>> > "frame[xx]" >>>> >>>>> > files though. What dumps do you want? >>>> >>>>> > >>>> >>>>> > -Håvard >>>> >>>>> > >>>> >>>>> > Den tir. 11. sep. 2018 kl. 21:27 skrev Håvard >>>> >>>>> > : >>>> >>>>> >> >>>> >>>>> >> Sorry about that, I forgot to enable a kernel config... >>>> >>>>> >> >>>> >>>>> >> -Håvard >>>> >>>>> >> >>>> >>>>> >> Den tir. 11. sep. 2018 kl. 21:20 skrev Connor McAdams >>>> >>>>> >> : >>>> >>>>> >>> >>>> >>>>> >>> When it's bound as a stub, it shouldn't show up in alsamixer >>>> >>>>> >>> controls. >>>> >>>>> >>> You can check what module is loaded by doing lspci -v . It >>>> >>>>> >>> should say >>>> >>>>> >>> kernel driver in use: pci-stub. Also, did you run the >>>> >>>>> >>> vfio-bind >>>> >>>>> >>> script >>>> >>>>> >>> before trying it? >>>> >>>>> >>> >>>> >>>>> >>> On Tue, Sep 11, 2018 at 3:18 PM, Håvard >>>> >>>>> >>> >>>> >>>>> >>> wrote: >>>> >>>>> >>> > Thank you for the offer! >>>> >>>>> >>> > >>>> >>>>> >>> > I run gentoo, but your github guide is very useful. I can't >>>> >>>>> >>> > seem to >>>> >>>>> >>> > bind my >>>> >>>>> >>> > audio driver to a pci-stud. Is the Sound card still supposed >>>> >>>>> >>> > to >>>> >>>>> >>> > function as >>>> >>>>> >>> > normal when I (think I) have bound it to a stud. >>>> >>>>> >>> > >>>> >>>>> >>> > -Håvard >>>> >>>>> >>> > >>>> >>>>> >>> > Den tir. 11. sep. 2018 kl. 20:26 skrev Connor McAdams >>>> >>>>> >>> > : >>>> >>>>> >>> >> >>>> >>>>> >>> >> One thing you could try, is using the program I used to >>>> >>>>> >>> >> reverse >>>> >>>>> >>> >> engineer the Sound Blaster Z series of cards, QemuHDADump. >>>> >>>>> >>> >> If your >>>> >>>>> >>> >> processor supports pci-passthrough with a virtual machine, >>>> >>>>> >>> >> you >>>> >>>>> >>> >> could >>>> >>>>> >>> >> run a Windows virtual machine with the sound card in it and >>>> >>>>> >>> >> capture >>>> >>>>> >>> >> the commands. I'd be willing to look through the dumps to >>>> >>>>> >>> >> see if >>>> >>>>> >>> >> there >>>> >>>>> >>> >> are any special verbs or anything. >>>> >>>>> >>> >> >>>> >>>>> >>> >> You can find the program here: >>>> >>>>> >>> >> https://github.com/Conmanx360/QemuHDADump >>>> >>>>> >>> >> >>>> >>>>> >>> >> Let me know. >>>> >>>>> >>> >> >>>> >>>>> >>> >> On Tue, Sep 11, 2018 at 2:15 PM, Håvard >>>> >>>>> >>> >> >>>> >>>>> >>> >> wrote: >>>> >>>>> >>> >> > Sorry, my gmail didn't update so I wrote my response >>>> >>>>> >>> >> > before I >>>> >>>>> >>> >> > read >>>> >>>>> >>> >> > your >>>> >>>>> >>> >> > last one. >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > It is a separate mic port as the G751JT doesn't have any >>>> >>>>> >>> >> > headset >>>> >>>>> >>> >> > multijacks. >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > I'll try and dig around in the kernel! Thanks for the >>>> >>>>> >>> >> > tip! >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > -Håvard >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > Den tir. 11. sep. 2018 kl. 20:09 skrev Håvard >>>> >>>>> >>> >> > : >>>> >>>>> >>> >> > >>>> >>>>> >>> >> >> Thank you for taking your time and trying to help! :) >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >> Do you know where I can ask around for more help on the >>>> >>>>> >>> >> >> issue? >>>> >>>>> >>> >> >> I >>>> >>>>> >>> >> >> don't >>>> >>>>> >>> >> >> want to give up yet. >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >> -Håvard >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >> Den tir. 11. sep. 2018 kl. 20:02 skrev Takashi Iwai >>>> >>>>> >>> >> >> : >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >>> On Tue, 11 Sep 2018 19:14:37 +0200, >>>> >>>>> >>> >> >>> Håvard wrote: >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> > Yes, microphone gets detected instantly and it >>>> >>>>> >>> >> >>> > automatically >>>> >>>>> >>> >> >>> > changes >>>> >>>>> >>> >> >>> > to >>>> >>>>> >>> >> >>> it >>>> >>>>> >>> >> >>> > in pavucontrol. >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> Then it likely requires some additional initialization >>>> >>>>> >>> >> >>> outside >>>> >>>>> >>> >> >>> HD-audio. It's hard to know, as it's pretty much >>>> >>>>> >>> >> >>> vendor-specific. >>>> >>>>> >>> >> >>> You can dig down the Windows, but I have no idea about >>>> >>>>> >>> >> >>> Windows >>>> >>>>> >>> >> >>> implementation, so can't give any hints, unfortunately. >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> Takashi >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> > Den tir. 11. sep. 2018 kl. 18:52 skrev Takashi Iwai >>>> >>>>> >>> >> >>> > : >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> > > On Tue, 11 Sep 2018 18:40:23 +0200, >>>> >>>>> >>> >> >>> > > Håvard wrote: >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > Thank you for replying! >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > Enabling loopback in alsamixer: >>>> >>>>> >>> >> >>> > > > http://i.imgur.com/lNo6e7T.png >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > And unmuting more and more things in "Mic >>>> >>>>> >>> >> >>> > > > Playback >>>> >>>>> >>> >> >>> > > > Volume" >>>> >>>>> >>> >> >>> > > > in >>>> >>>>> >>> >> >>> > > hdaanalyzer: >>>> >>>>> >>> >> >>> > > > http://i.imgur.com/H0HiOhy.png >>>> >>>>> >>> >> >>> > > > made white noise come from the headset. However >>>> >>>>> >>> >> >>> > > > it did >>>> >>>>> >>> >> >>> > > > not >>>> >>>>> >>> >> >>> > > > change or >>>> >>>>> >>> >> >>> > > react >>>> >>>>> >>> >> >>> > > > at all when I talked or even muted the microphone >>>> >>>>> >>> >> >>> > > > physically. >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > I couldn't find "Mic Playback Switch" anywhere in >>>> >>>>> >>> >> >>> > > > either >>>> >>>>> >>> >> >>> > > > alsamixer >>>> >>>>> >>> >> >>> or >>>> >>>>> >>> >> >>> > > > hdaanalyzer. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > It's a mixer mute switch. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > > The microphone works perfectly fine under >>>> >>>>> >>> >> >>> > > > Windows, so I >>>> >>>>> >>> >> >>> > > > don't >>>> >>>>> >>> >> >>> > > > think >>>> >>>>> >>> >> >>> it is >>>> >>>>> >>> >> >>> > > > the mic pin. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > But the fact above indicates the possibility of the >>>> >>>>> >>> >> >>> > > wrong >>>> >>>>> >>> >> >>> > > pin, >>>> >>>>> >>> >> >>> > > too. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > Does the jack detection of the ext mic pin work? >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > Takashi >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > -Håvard >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > Den man. 10. sep. 2018 kl. 22:39 skrev Takashi >>>> >>>>> >>> >> >>> > > > Iwai >>>> >>>>> >>> >> >>> > > > >>> >>>>> >>> >> >>> >: >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > > On Thu, 06 Sep 2018 20:44:30 +0200, >>>> >>>>> >>> >> >>> > > > > Håvard wrote: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > Additional relevant info: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > A similar issue was also discussed three >>>> >>>>> >>> >> >>> > > > > > years ago >>>> >>>>> >>> >> >>> > > > > > on >>>> >>>>> >>> >> >>> > > > > > Sun >>>> >>>>> >>> >> >>> > > > > > Jun >>>> >>>>> >>> >> >>> > > 17:15:54 >>>> >>>>> >>> >> >>> > > > > CEST >>>> >>>>> >>> >> >>> > > > > > 2015 and was about his surround sound setup, >>>> >>>>> >>> >> >>> > > > > > but did >>>> >>>>> >>> >> >>> > > > > > not >>>> >>>>> >>> >> >>> > > > > > touch >>>> >>>>> >>> >> >>> on the >>>> >>>>> >>> >> >>> > > > > > external microphone problem: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> http://mailman.alsa-project.org/pipermail/alsa-devel/2015-June/093317.html >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > alsa-info.sh: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> http://www.alsa-project.org/db/?f=1d8616ba5977308e03db6c3a86e36e9e9b38d6f0 >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > Graph of ALC668 chipset from hdaanalyzer: >>>> >>>>> >>> >> >>> > > > > > http://i.imgur.com/c08DNJW.png >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > setting alsa-mode[1-8] does nothing to help >>>> >>>>> >>> >> >>> > > > > > the >>>> >>>>> >>> >> >>> > > > > > issue. >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > There are several of similar bug reports >>>> >>>>> >>> >> >>> > > > > > around the >>>> >>>>> >>> >> >>> > > > > > web >>>> >>>>> >>> >> >>> experiencing >>>> >>>>> >>> >> >>> > > > > > similar issues, and on different distros. >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > Microphone works perfectly in windows >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > I have a ASUS ROG G751JT, but this problem >>>> >>>>> >>> >> >>> > > > > > seems to >>>> >>>>> >>> >> >>> > > > > > happen >>>> >>>>> >>> >> >>> > > > > > with >>>> >>>>> >>> >> >>> all >>>> >>>>> >>> >> >>> > > > > laptops >>>> >>>>> >>> >> >>> > > > > > under the G751 name. >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > When you enable the loopback volume and switch, >>>> >>>>> >>> >> >>> > > > > and >>>> >>>>> >>> >> >>> > > > > unmute/adjust >>>> >>>>> >>> >> >>> "Mic >>>> >>>>> >>> >> >>> > > > > Playback Volume", and "Mic Playback Switch", do >>>> >>>>> >>> >> >>> > > > > you >>>> >>>>> >>> >> >>> > > > > hear >>>> >>>>> >>> >> >>> > > > > the >>>> >>>>> >>> >> >>> > > > > input >>>> >>>>> >>> >> >>> > > > > from the ext mic? It's a route directly from >>>> >>>>> >>> >> >>> > > > > NID 0x18 >>>> >>>>> >>> >> >>> > > > > to >>>> >>>>> >>> >> >>> > > > > the >>>> >>>>> >>> >> >>> mixer >>>> >>>>> >>> >> >>> > > > > NID 0x0b, then output mixer NID 0x0c, then >>>> >>>>> >>> >> >>> > > > > outputs. >>>> >>>>> >>> >> >>> > > > > So >>>> >>>>> >>> >> >>> > > > > this >>>> >>>>> >>> >> >>> > > > > can >>>> >>>>> >>> >> >>> be >>>> >>>>> >>> >> >>> > > > > used to verify the hardware routing. >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > If you don't hear via this route, it means that >>>> >>>>> >>> >> >>> > > > > the >>>> >>>>> >>> >> >>> > > > > input >>>> >>>>> >>> >> >>> > > > > from >>>> >>>>> >>> >> >>> the ext >>>> >>>>> >>> >> >>> > > > > mic pin itself is broken, and it implies that >>>> >>>>> >>> >> >>> > > > > something >>>> >>>>> >>> >> >>> > > > > outside >>>> >>>>> >>> >> >>> > > > > HD-audio codec. >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > Takashi >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > [2 ] >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > [2 ] >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> > _______________________________________________ >>>> >>>>> >>> >> > Alsa-devel mailing list >>>> >>>>> >>> >> > Alsa-devel@alsa-project.org >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel