What's your build OS

On Sun, Apr 16, 2017 at 6:09 PM Paul D. DeRocco <pderocco@ix.netcom.com>
wrote:

> I'm trying to migrate an Atom-based build from Fido to Morty, and also
> switch from 32-bit mode to x32. On a clean build, it gets about half way
> through, and then suddenly coughs up a patch error. I've put blank lines
> between the log lines so that the email word wrap won't be as confusing:
>
> --
>
> DEBUG: Executing shell function do_patch
>
> (1/660) ARM-LPAE-Invalidate-the-TLB-for-module-addresses-dur.patch
>
> [INFO]: check of
> .kernel-meta//patches//arch/arm/v7-A15/ARM-LPAE-Invalidate-the-TLB-for-mod
> ule-addresses-dur.patch with "git am" did not pass, trying reduced
> context.
>
> [INFO]: Context reduced git-am of
> .kernel-meta//patches//arch/arm/v7-A15/ARM-LPAE-Invalidate-the-TLB-for-mod
> ule-addresses-dur.patch with "git am" did not work, trying "apply".
>
> error: patch failed: arch/arm/mm/fault.c:448
>
> error: arch/arm/mm/fault.c: patch does not apply
>
> [ERROR]: Application of
> .kernel-meta//patches//arch/arm/v7-A15/ARM-LPAE-Invalidate-
> the-TLB-for-module-addresses-dur.patch failed.
>
>          Patch needs to be refreshed. Sample resolution script:
>
>              .git/rebase-apply/resolve_rejects
>
> WARNING:
> /home/pauld/yocto-morty/build/tmp/work/chroma_bsp-poky-linux-gnux32/linux-
> yocto-rt/4.8.12+gitAUTOINC+926c93ae07_3bafd55e39-r0/temp/run.do_patch.3069
> 0:1 exit 1 from 'kgit-s2q --gen -v --patches .kernel-meta/'
>
> ERROR: Function failed: do_patch (log file is located at
> /home/pauld/yocto-morty/build/tmp/work/chroma_bsp-poky-linux-gnux32/linux-
> yocto-rt/4.8.12+gitAUTOINC+926c93ae07_3bafd55e39-r0/temp/log.do_patch.3069
> 0)
>
> --
>
> If I start bitbake again, it detects a "fence", and proceeds a little
> further. I can do it over and over again, and it keeps building more and
> more, but this can't be right, can it? The strange thing is that the
> patches are all about ARM, PowerPC, etc., which have nothing to do with my
> system. Could this be some fundamental misconfiguration having to do with
> my MACHINE? At the beginning of my local.conf, I have:
>
>         MACHINE ?= "chroma-bsp"
>         DEFAULTTUNE = "core2-64-x32"
>         baselib = "libx32"
>
> where chroma-bsp is defined in my own layer. My chroma-bsp.conf file
> contains (among other things):
>
>         PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto-rt"
>         PREFERRED_VERSION_linux-yocto-rt ?= "4.8%"
>         require conf/machine/include/tune-atom.inc
>         require conf/machine/include/x86-base.inc
>
> I'm not really good at this. Does anyone see anything wrong?
>
> --
>
> Ciao,               Paul D. DeRocco
> Paul                mailto:pderocco@ix.netcom.com
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>