From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: MIME-Version: 1.0 References: <20181020182502.8835-1-bunk@kernel.org> <20181022145858.GA24640@localhost> <20181023172637.GB24921@localhost> In-Reply-To: <20181023172637.GB24921@localhost> From: Bartosz Golaszewski Date: Wed, 24 Oct 2018 12:00:11 +0200 Message-ID: Subject: Re: [PATCH v2] eeprom: at24: Add 24c2048 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable To: bunk@kernel.org Cc: Rob Herring , Mark Rutland , linux-i2c , devicetree List-ID: wt., 23 pa=C5=BA 2018 o 19:26 Adrian Bunk napisa=C5=82(a)= : > > On Mon, Oct 22, 2018 at 11:59:56PM +0200, Bartosz Golaszewski wrote: > > pon., 22 pa=C5=BA 2018 o 16:59 Adrian Bunk napisa=C5= =82(a): > >... > > > I just realized that I forgot to add the entry to > > > Documentation/devicetree/bindings/eeprom/at24.txt, > > > fixed patch is below. > >... > > please send it to the DT maintainers as well and get their Acked-by on = that. > > > > Bart > >... > > Rob, Mark, please ack this change. > Rob only responds to patches that were picked up by patchwork, so you'll have to resend it. Bart > Thanks > Adrian > > > From 580ae2be3d314d9b8df34c9f4e31a9901cc8d300 Mon Sep 17 00:00:00 2001 > From: Adrian Bunk > Date: Sat, 20 Oct 2018 20:40:16 +0300 > Subject: [PATCH] eeprom: at24: Add 24c2048 > > Works with an ST M24M02. > > Signed-off-by: Adrian Bunk > --- > Documentation/devicetree/bindings/eeprom/at24.txt | 1 + > drivers/misc/eeprom/Kconfig | 2 +- > drivers/misc/eeprom/at24.c | 3 +++ > 3 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Document= ation/devicetree/bindings/eeprom/at24.txt > index aededdbc262b..f9a7c984274c 100644 > --- a/Documentation/devicetree/bindings/eeprom/at24.txt > +++ b/Documentation/devicetree/bindings/eeprom/at24.txt > @@ -27,6 +27,7 @@ Required properties: > "atmel,24c256", > "atmel,24c512", > "atmel,24c1024", > + "atmel,24c2048", > > If is not "atmel", then a fallback must b= e used > with the same and "atmel" as manufacturer. > diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig > index 68a1ac929917..d382b13c27dd 100644 > --- a/drivers/misc/eeprom/Kconfig > +++ b/drivers/misc/eeprom/Kconfig > @@ -13,7 +13,7 @@ config EEPROM_AT24 > ones like at24c64, 24lc02 or fm24c04: > > 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, > - 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 > + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024, 24c204= 8 > > Unless you like data loss puzzles, always be sure that any chip > you configure as a 24c32 (32 kbit) or larger is NOT really a > diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c > index 7e50e1d6f58c..94836fcbe721 100644 > --- a/drivers/misc/eeprom/at24.c > +++ b/drivers/misc/eeprom/at24.c > @@ -173,6 +173,7 @@ AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLA= G_ADDR16); > AT24_CHIP_DATA(at24_data_24c256, 262144 / 8, AT24_FLAG_ADDR16); > AT24_CHIP_DATA(at24_data_24c512, 524288 / 8, AT24_FLAG_ADDR16); > AT24_CHIP_DATA(at24_data_24c1024, 1048576 / 8, AT24_FLAG_ADDR16); > +AT24_CHIP_DATA(at24_data_24c2048, 2097152 / 8, AT24_FLAG_ADDR16); > /* identical to 24c08 ? */ > AT24_CHIP_DATA(at24_data_INT3499, 8192 / 8, 0); > > @@ -199,6 +200,7 @@ static const struct i2c_device_id at24_ids[] =3D { > { "24c256", (kernel_ulong_t)&at24_data_24c256 }, > { "24c512", (kernel_ulong_t)&at24_data_24c512 }, > { "24c1024", (kernel_ulong_t)&at24_data_24c1024 }, > + { "24c2048", (kernel_ulong_t)&at24_data_24c2048 }, > { "at24", 0 }, > { /* END OF LIST */ } > }; > @@ -227,6 +229,7 @@ static const struct of_device_id at24_of_match[] =3D = { > { .compatible =3D "atmel,24c256", .data =3D &at24_data_24= c256 }, > { .compatible =3D "atmel,24c512", .data =3D &at24_data_24= c512 }, > { .compatible =3D "atmel,24c1024", .data =3D &at24_data_24= c1024 }, > + { .compatible =3D "atmel,24c2048", .data =3D &at24_data_24= c2048 }, > { /* END OF LIST */ }, > }; > MODULE_DEVICE_TABLE(of, at24_of_match); > -- > 2.11.0 >