From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Geis Subject: Re: [BUG] rk3399 rockpro64 fails to power off Date: Mon, 25 Nov 2019 19:06:41 -0500 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: heiko.stuebner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org Cc: "open list:ARM/Rockchip SoC..." List-Id: linux-rockchip.vger.kernel.org On Mon, Nov 25, 2019 at 11:34 AM Peter Geis wrote: > > Good Morning, > > Another issue I've come across with the rockpro64. > When issuing a shutdown command, the board will halt, but never powers off. > > While the rk808 is assigned as the rockchip,system-power-controller in > the devicetree, it is not binding to the pm-poweroff command. > This is due to the psci driver already binding to the pm-poweroff command. > > I have only managed to test this with the rockchip miniloader, both on > rockchip-u-boot and mainline-u-boot, the behavior is the same. > I'm not sure if this is a bootloader issue, atf issue, or psci driver > misbehavior. > As atf should be handling the psci command, it should be powering off > the board, but I am unsure if it has the capability of doing so. > If it does not, then the rk808 driver should be assigned to > pm-poweroff, but it does not because psci already claimed it. Confirmed the issue also occurs with tpl/spl mainline u-boot. I'm running the latest atf from the atf github repository.