Re: [PATCH v5 0/4] clk: ralink: make system controller a reset provider

[Sergio Paracuellos <sergio.paracuellos@gmail.com>]

Hi Stephen,

On Fri, Jan 7, 2022 at 3:10 AM Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Sergio Paracuellos (2021-12-13 04:00:17)
> > Hi Stephen,
> >
> > On Sun, Nov 7, 2021 at 8:42 AM Sergio Paracuellos
> > <sergio.paracuellos@gmail.com> wrote:
> > >
> > > Hi all,
> > >
> > > This patch series add minimal change to provide mt7621 resets properly
> > > defining them in the 'mediatek,mt7621-sysc' node which is the system
> > > controller of the SoC and is already providing clocks to the rest of
> > > the world.
> > >
> > > There is shared architecture code for all ralink platforms in 'reset.c'
> > > file located in 'arch/mips/ralink' but the correct thing to do to align
> > > hardware with software seems to define and add related reset code to the
> > > already mainlined clock driver.
> > >
> > > After this changes, we can get rid of the useless reset controller node
> > > in the device tree and use system controller node instead where the property
> > > '#reset-cells' has been added. Binding documentation for this nodeq has
> > > been updated with the new property accordly.
> > >
> > > This series also provide a bindings include header where all related
> > > reset bits for the MT7621 SoC are defined.
> > >
> > > Also, please take a look to this review [0] to understand better motivation
>
> Is [0] a link?

Yes, sorry it was not included:

[0]: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210926145931.14603-3-sergio.paracuellos@gmail.com/

>
> > > for this series.
> > >
> > > Regarding the way of merging this:
> > >  - I'd like patches 1 and 4 which are related going through staging tree.
> > >  - The other two (patches 2 and 3) can perfectly go through the clock tree.
> > >
> > > Thanks in advance for your feedback.
> > >
> > > Changes in v5:
> > >  - Move platform driver init process into 'arch_initcall' to be sure the
> > >    rest of the world can get the resets available when needed (since PCIe
> > >    controller driver has been moved from staging into 'drivers/pci/controller'
> > >    is probed earlier and reset was not available so it was returning
> > >    -EPROBE_DEFER on firt try. Moving into 'arch_initcall' avoids the 'a bit
> > >    anoying' PCI first failed log trace.
> >
> > Gentle ping on this series.
> >
>
> It looks to largely be a reset controller patch series. Can you get
> review from the reset maintainer?
>
> RESET CONTROLLER FRAMEWORK
> M:      Philipp Zabel <p.zabel@pengutronix.de>
> S:      Maintained

Ok, I'll rebase and resend the series including Philipp Zabel for
reviewing this.

Thanks,
    Sergio Paracuellos