Re: [PATCH v1 0/6] gpio: mlxbf2: Introduce proper interrupt handling

[Bartosz Golaszewski <bgolaszewski@baylibre.com>]

On Mon, Aug 16, 2021 at 2:00 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> This is just a WIP / TODO series based on the discussion [1].
> I hope nVidia will finish it and fix the initial problem sooner than later.
>
> Bart, Linus, First 4 patches may be directly applied to the tree (they are
> at least compile-tested, but I believe they won't change any functionality.
>
> Patch 5 is some stubs that should have been done in the driver.
> Patch 6 is follow up removal of custom GPIO IRQ handling from
> Mellanox GBE driver. Both of them are quite far from finishing,
> but it's a start for nVidia to develop and test proper solution.
>
> In any case, I will probably sent end this week the ACPI IRQ abuse
> part from the GBE driver (I won't touch OF path).
>
> ARs for nVidia:
> 0) review this series;
> 1) properly develop GPIO driver;
> 2) replace custom code with correct one;
> 3) send the work for review to GPIO and ACPI maintainers (basically list
>    of this series).
>
> On my side I will help you if you have any questions regarding to GPIO
> and ACPI.
>
> Andy Shevchenko (6):
>   gpio: mlxbf2: Convert to device PM ops
>   gpio: mlxbf2: Drop wrong use of ACPI_PTR()
>   gpio: mlxbf2: Use devm_platform_ioremap_resource()
>   gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro
>   TODO: gpio: mlxbf2: Introduce IRQ support
>   TODO: net: mellanox: mlxbf_gige: Replace non-standard interrupt
>     handling
>
>  drivers/gpio/gpio-mlxbf2.c                    | 151 ++++++++++---
>  .../mellanox/mlxbf_gige/mlxbf_gige_gpio.c     | 212 ------------------
>  2 files changed, 120 insertions(+), 243 deletions(-)
>  delete mode 100644 drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
>
> --
> 2.30.2
>

Applied first four patches.

Bart