From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Fri, 25 Jan 2019 16:11:32 +0530 Subject: [U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC In-Reply-To: References: <20190121103115.17794-1-jagan@amarulasolutions.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jan 25, 2019 at 2:05 PM Chen-Yu Tsai wrote: > > On Fri, Jan 25, 2019 at 4:27 PM Jagan Teki wrote: > > > > On Tue, Jan 22, 2019 at 7:55 AM Chen-Yu Tsai wrote: > > > > > > On Mon, Jan 21, 2019 at 6:31 PM Jagan Teki wrote: > > > > > > > > Compared to previous version changes[1] this version do manage > > > > ahb clocks/resets via CLK framework. > > > > > > > > This version created changes along with Andre patches to support > > > > clock/resets[2] > > > > > > > > Tested A64, SD, eMMC and respective changes available at > > > > u-boot-sunxi/next > > > > > > > > Changes for v3: > > > > - Handle clock via CLK framework. > > > > Changes for v2: > > > > - update the 'reset enablement' logic to do > > > > required SoC's > > > > > > > > [1] https://patchwork.ozlabs.org/cover/1026828/ > > > > [2] https://patchwork.ozlabs.org/cover/1027850/ > > > > > > > > Andre Przywara (2): > > > > sunxi: clk: add MMC gates/resets > > > > sunxi: clk: A80: add MMC clock support > > > > > > > > Jagan Teki (7): > > > > mmc: sunxi: Add A83T emmc compatible > > > > mmc: sunxi: Add mmc, emmc H5/A64 compatible > > > > mmc: sunxi: Add DM_MMC support for H6 > > > > mmc: sunxi: Add DM_MMC support for A80 > > > > dm: mmc: sunxi: Add CLK and RESET support > > > > arm: sunxi: Enable DM_MMC > > > > arm: dts: sunxi: Enumerate MMC2 as MMC1 > > > > > > Tested-by: Chen-Yu Tsai # on the Bananapi M2M > > > > > > However, the A80 MMC clock patch is still missing code to toggle > > > the upstream bus clock gate and reset control in the CCU. > > > > Sent it with original mmc clock and reset patch[1], let me know your comments. > > Right. The problem is nowhere in this series are those enabled / > deasserted. The A80 CCU only has one gate & reset for the whole MMC > subsystem, including the MMC config clocks block. Ideally the > driver for that block should enable the gate and deassert the > reset control. Yes, that same has been included with v3.1 patch which I linked above.