From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jagan Teki <jagan@amarulasolutions.com>
Date: Thu, 16 May 2019 23:07:45 +0530
Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
In-Reply-To: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
References: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
Message-ID: <CAMty3ZDA4w_UzGWGt7u3SkVoe=yXnZHdt0RDJ4qSGFrF+3uMsw@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thu, May 16, 2019 at 11:02 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi,
>
> I get the following error when trying to boot mx6q sabresd with 2019.07-rc2:
>
> U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300)
> Trying to boot from MMC1
> spl: could not find mmc device 0. error: -19

No device.

Is it DM-SPL-enabled? check with u-boot,dm-spl on associated nodes?

usdhc3 is  for sabresd, seems like gpio2 missing to add u-boot,dm-spl