From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Sun, 14 Apr 2019 22:59:43 +0530 Subject: [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support In-Reply-To: <20190412141527.6049-3-peron.clem@gmail.com> References: <20190412141527.6049-1-peron.clem@gmail.com> <20190412141527.6049-3-peron.clem@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de On Fri, Apr 12, 2019 at 7:45 PM Clément Péron wrote: > > Beelink GS1 is an Allwinner H6 based TV box, > which support: > - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 > - GPU Mali-T720 > - 2GB LPDDR3 RAM > - 16GB eMMC > - AXP805 PMIC > - 1Gbps GMAC via RTL8211E > - USB 2.0 and 3.0 Host > - HDMI port > - S/PDIF port > - 5V/2A DC power supply > - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS) Please dts sync commit details here. > > Signed-off-by: Clément Péron > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++++++++ Seems like this has part of required nodes, sync the complete dts. > configs/beelink_gs1_defconfig | 15 ++ Add entry on board/sunxi/MAINTAINERS > 3 files changed, 200 insertions(+) > create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts > create mode 100644 configs/beelink_gs1_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 86a01c2c70..61e7156284 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -467,6 +467,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ > sun50i-h5-orangepi-prime.dtb \ > sun50i-h5-orangepi-zero-plus2.dtb > dtb-$(CONFIG_MACH_SUN50I_H6) += \ > + sun50i-h6-beelink-gs1.dtb \ > sun50i-h6-orangepi-lite2.dtb \ > sun50i-h6-orangepi-one-plus.dtb \ > sun50i-h6-pine-h64.dtb > diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts > new file mode 100644 > index 0000000000..54b0882bed > --- /dev/null > +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts > @@ -0,0 +1,184 @@ > +// SPDX-License-Identifier: (GPL-2.0+ or MIT) > +/* > + * Copyright (C) 2019 Clément Péron > + */ > + > +/dts-v1/; > + > +#include "sun50i-h6.dtsi" > + > +#include > + > +/ { > + model = "Beelink GS1"; > + compatible = "azw,beelink-gs1", "allwinner,sun50i-h6"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + power { > + label = "beelink:white:power"; > + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ > + default-state = "on"; > + }; > + }; > + > + reg_vcc5v: vcc5v { > + /* board wide 5V supply directly from the DC jack */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > +}; > + > +&mmc0 { > + vmmc-supply = <®_cldo1>; > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc2 { > + vmmc-supply = <®_cldo1>; > + vqmmc-supply = <®_bldo2>; > + non-removable; > + cap-mmc-hw-reset; > + bus-width = <8>; > + status = "okay"; > +}; > + > +&r_i2c { > + status = "okay"; > + > + axp805: pmic at 36 { > + compatible = "x-powers,axp805", "x-powers,axp806"; > + reg = <0x36>; > + interrupt-parent = <&r_intc>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + interrupt-controller; > + #interrupt-cells = <1>; > + x-powers,self-working-mode; > + vina-supply = <®_vcc5v>; > + vinb-supply = <®_vcc5v>; > + vinc-supply = <®_vcc5v>; > + vind-supply = <®_vcc5v>; > + vine-supply = <®_vcc5v>; > + aldoin-supply = <®_vcc5v>; > + bldoin-supply = <®_vcc5v>; > + cldoin-supply = <®_vcc5v>; > + > + regulators { > + reg_aldo1: aldo1 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-pl"; > + }; > + > + reg_aldo2: aldo2 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-ac200"; > + regulator-enable-ramp-delay = <100000>; > + }; > + > + reg_aldo3: aldo3 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc25-dram"; > + }; > + > + reg_bldo1: bldo1 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc-bias-pll"; > + }; > + > + reg_bldo2: bldo2 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc-efuse-pcie-hdmi-io"; > + }; > + > + reg_bldo3: bldo3 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc-dcxoio"; > + }; > + > + bldo4 { > + /* unused */ > + }; > + > + reg_cldo1: cldo1 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-3v3"; > + }; > + > + reg_cldo2: cldo2 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-wifi-1"; > + }; > + > + reg_cldo3: cldo3 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc-wifi-2"; > + }; > + > + reg_dcdca: dcdca { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1080000>; > + regulator-name = "vdd-cpu"; > + }; > + > + reg_dcdcc: dcdcc { > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1080000>; > + regulator-name = "vdd-gpu"; > + }; > + > + reg_dcdcd: dcdcd { > + regulator-always-on; > + regulator-min-microvolt = <960000>; > + regulator-max-microvolt = <960000>; > + regulator-name = "vdd-sys"; > + }; > + > + reg_dcdce: dcdce { > + regulator-always-on; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-name = "vcc-dram"; > + }; > + > + sw { > + /* unused */ > + }; > + }; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_ph_pins>; > + status = "okay"; > +}; > diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig > new file mode 100644 > index 0000000000..ef4dd29549 > --- /dev/null > +++ b/configs/beelink_gs1_defconfig > @@ -0,0 +1,15 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN50I_H6=y > +CONFIG_MMC0_CD_PIN="PF6" > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > +# CONFIG_PSCI_RESET is not set > +CONFIG_NR_DRAM_BANKS=1 > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_SPL_DOS_PARTITION is not set > +# CONFIG_SPL_EFI_PARTITION is not set > +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1" > +CONFIG_LED=y > +CONFIG_LED_GPIO=y Seems like most of Allwinner gpio's are gpio-leds. so select LED (since it's dm led core) in arch/arm/Kconfig if LED_GPIO. I'm thinking this could be proper assignment.