From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ua1-f68.google.com ([209.85.222.68]:34570 "EHLO mail-ua1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389350AbeKPSmS (ORCPT ); Fri, 16 Nov 2018 13:42:18 -0500 Received: by mail-ua1-f68.google.com with SMTP id z23so7768005uam.1 for ; Fri, 16 Nov 2018 00:30:59 -0800 (PST) MIME-Version: 1.0 References: <1542352851-25393-1-git-send-email-uli+renesas@fpond.eu> In-Reply-To: <1542352851-25393-1-git-send-email-uli+renesas@fpond.eu> From: Geert Uytterhoeven Date: Fri, 16 Nov 2018 09:30:46 +0100 Message-ID: Subject: Re: [PATCH v2 0/4] I2C0/3/5 pin control for H3 and M3-W To: uli+renesas@fpond.eu Cc: Linux-Renesas , Wolfram Sang Content-Type: text/plain; charset="UTF-8" Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: Hi Uli, On Fri, Nov 16, 2018 at 8:21 AM Ulrich Hecht wrote: > This is an up-port from the BSP. Unfortunately I could not test these > because none of those pins seem to be accessible on Salvator boards (not on > ULCB either, AFAICT), so the best thing I can say is that they don't seem to > break anything. I think I replied before... For Salvator-X(S): 1. If you set SW5 and SW6 to their center positions, you can access I2C3 on EXIO Connector D. 2. I2C5 is available on test points CP45/46. > This revision incorporates the suggestions made by Geert; see below for > details. Thanks for the update! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds