* [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins
@ 2017-04-14 21:09 ` Sergei Shtylyov
0 siblings, 0 replies; 6+ messages in thread
From: Sergei Shtylyov @ 2017-04-14 21:09 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Mark Rutland, linux-renesas-soc, devicetree
Cc: Magnus Damm, Russell King, linux-arm-kernel, Sergei Shtylyov
[-- Attachment #1: ARM-dts-sk-rzg1m-add-SCIF0-pins.patch --]
[-- Type: text/plain, Size: 1057 bytes --]
Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the SK-RZG1M board
*
- * Copyright (C) 2016 Cogent Embedded, Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -39,7 +39,17 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif0_pins: scif0 {
+ groups = "scif0_data";
+ function = "scif0";
+ };
+};
+
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins
@ 2017-04-14 21:09 ` Sergei Shtylyov
0 siblings, 0 replies; 6+ messages in thread
From: Sergei Shtylyov @ 2017-04-14 21:09 UTC (permalink / raw)
To: linux-arm-kernel
Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for the SK-RZG1M board
*
- * Copyright (C) 2016 Cogent Embedded, Inc.
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -39,7 +39,17 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif0_pins: scif0 {
+ groups = "scif0_data";
+ function = "scif0";
+ };
+};
+
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins
2017-04-14 21:09 ` Sergei Shtylyov
@ 2017-04-20 14:19 ` Geert Uytterhoeven
-1 siblings, 0 replies; 6+ messages in thread
From: Geert Uytterhoeven @ 2017-04-20 14:19 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Simon Horman, Rob Herring, Mark Rutland, Linux-Renesas,
devicetree, Magnus Damm, Russell King, linux-arm-kernel
Hi Sergei,
On Fri, Apr 14, 2017 at 11:09 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
> device tree.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
> +++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
> @@ -1,7 +1,7 @@
> /*
> * Device Tree Source for the SK-RZG1M board
> *
> - * Copyright (C) 2016 Cogent Embedded, Inc.
> + * Copyright (C) 2016-2017 Cogent Embedded, Inc.
> *
> * This file is licensed under the terms of the GNU General Public License
> * version 2. This program is licensed "as is" without any warranty of any
> @@ -39,7 +39,17 @@
> clock-frequency = <20000000>;
> };
>
> +&pfc {
> + scif0_pins: scif0 {
> + groups = "scif0_data";
I don't have schematics for this board, but you told me it's very similar to
Porter. Hence I'd expect "scif0_data_d" instead.
In my experience, when changing pinctrl to map the lines of a device to a new
set of pins, but not mapping another device to the old set of pins, it may
output the signals on both the old and the new set of pins.
Does serial console input work with "scif0_data"?
> + function = "scif0";
> + };
> +};
> +
> &scif0 {
> + pinctrl-0 = <&scif0_pins>;
> + pinctrl-names = "default";
> +
> status = "okay";
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins
@ 2017-04-20 14:19 ` Geert Uytterhoeven
0 siblings, 0 replies; 6+ messages in thread
From: Geert Uytterhoeven @ 2017-04-20 14:19 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sergei,
On Fri, Apr 14, 2017 at 11:09 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
> device tree.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
> +++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
> @@ -1,7 +1,7 @@
> /*
> * Device Tree Source for the SK-RZG1M board
> *
> - * Copyright (C) 2016 Cogent Embedded, Inc.
> + * Copyright (C) 2016-2017 Cogent Embedded, Inc.
> *
> * This file is licensed under the terms of the GNU General Public License
> * version 2. This program is licensed "as is" without any warranty of any
> @@ -39,7 +39,17 @@
> clock-frequency = <20000000>;
> };
>
> +&pfc {
> + scif0_pins: scif0 {
> + groups = "scif0_data";
I don't have schematics for this board, but you told me it's very similar to
Porter. Hence I'd expect "scif0_data_d" instead.
In my experience, when changing pinctrl to map the lines of a device to a new
set of pins, but not mapping another device to the old set of pins, it may
output the signals on both the old and the new set of pins.
Does serial console input work with "scif0_data"?
> + function = "scif0";
> + };
> +};
> +
> &scif0 {
> + pinctrl-0 = <&scif0_pins>;
> + pinctrl-names = "default";
> +
> status = "okay";
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins
2017-04-20 14:19 ` Geert Uytterhoeven
@ 2017-04-20 15:45 ` Sergei Shtylyov
-1 siblings, 0 replies; 6+ messages in thread
From: Sergei Shtylyov @ 2017-04-20 15:45 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Simon Horman, Rob Herring, Mark Rutland, Linux-Renesas,
devicetree, Magnus Damm, Russell King, linux-arm-kernel
On 04/20/2017 05:19 PM, Geert Uytterhoeven wrote:
>> Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
>> device tree.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 12 +++++++++++-
>> 1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
>> ===================================================================
>> --- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
>> +++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
[...]
>> @@ -39,7 +39,17 @@
>> clock-frequency = <20000000>;
>> };
>>
>> +&pfc {
>> + scif0_pins: scif0 {
>> + groups = "scif0_data";
>
> I don't have schematics for this board, but you told me it's very similar to
> Porter. Hence I'd expect "scif0_data_d" instead.
And you are absolutely right! Sorry about my overlook...
> In my experience, when changing pinctrl to map the lines of a device to a new
> set of pins, but not mapping another device to the old set of pins, it may
> output the signals on both the old and the new set of pins.
>
> Does serial console input work with "scif0_data"?
Sure. :-)
MBR, Sergei
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins
@ 2017-04-20 15:45 ` Sergei Shtylyov
0 siblings, 0 replies; 6+ messages in thread
From: Sergei Shtylyov @ 2017-04-20 15:45 UTC (permalink / raw)
To: linux-arm-kernel
On 04/20/2017 05:19 PM, Geert Uytterhoeven wrote:
>> Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's
>> device tree.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 12 +++++++++++-
>> 1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
>> ===================================================================
>> --- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
>> +++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
[...]
>> @@ -39,7 +39,17 @@
>> clock-frequency = <20000000>;
>> };
>>
>> +&pfc {
>> + scif0_pins: scif0 {
>> + groups = "scif0_data";
>
> I don't have schematics for this board, but you told me it's very similar to
> Porter. Hence I'd expect "scif0_data_d" instead.
And you are absolutely right! Sorry about my overlook...
> In my experience, when changing pinctrl to map the lines of a device to a new
> set of pins, but not mapping another device to the old set of pins, it may
> output the signals on both the old and the new set of pins.
>
> Does serial console input work with "scif0_data"?
Sure. :-)
MBR, Sergei
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-04-20 15:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-14 21:09 [PATCH 2/3] ARM: dts: sk-rzg1m: add SCIF0 pins Sergei Shtylyov
2017-04-14 21:09 ` Sergei Shtylyov
2017-04-20 14:19 ` Geert Uytterhoeven
2017-04-20 14:19 ` Geert Uytterhoeven
2017-04-20 15:45 ` Sergei Shtylyov
2017-04-20 15:45 ` Sergei Shtylyov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.