[PATCH v3 0/2] dt-bindings: timer: sifive,clint: Miscellaneous improvements

[PATCH v3 0/2] dt-bindings: timer: sifive,clint: Miscellaneous improvements

[Geert Uytterhoeven]

	Hi all,

This patch series contains two improvements for the SiFive CLINT DT
bindings.

Changes compared to v2[1]:
  - Add Acked-by, Reviewed-by.

Changes compared to v1[2]:
  - Split in two patches,
  - Improve patch description and document limit rationale.

Thanks!

[1] https://lore.kernel.org/r/cover.1639662093.git.geert@linux-m68k.org
[2] https://lore.kernel.org/r/20211125152317.162958-1-geert@linux-m68k.org


Geert Uytterhoeven (2):
  dt-bindings: timer: sifive,clint: Fix number of interrupts
  dt-bindings: timer: sifive,clint: Group interrupt tuples

 .../devicetree/bindings/timer/sifive,clint.yaml          | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

-- 
2.25.1

[PATCH v3 0/2] dt-bindings: timer: sifive, clint: Miscellaneous improvements

[Geert Uytterhoeven]

	Hi all,

This patch series contains two improvements for the SiFive CLINT DT
bindings.

Changes compared to v2[1]:
  - Add Acked-by, Reviewed-by.

Changes compared to v1[2]:
  - Split in two patches,
  - Improve patch description and document limit rationale.

Thanks!

[1] https://lore.kernel.org/r/cover.1639662093.git.geert@linux-m68k.org
[2] https://lore.kernel.org/r/20211125152317.162958-1-geert@linux-m68k.org


Geert Uytterhoeven (2):
  dt-bindings: timer: sifive,clint: Fix number of interrupts
  dt-bindings: timer: sifive,clint: Group interrupt tuples

 .../devicetree/bindings/timer/sifive,clint.yaml          | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 1/2] dt-bindings: timer: sifive,clint: Fix number of interrupts

[Geert Uytterhoeven]

The number of interrupts lacks an upper bound, thus assuming one,
causing properly grouped "interrupts-extended" properties to be flagged
as an error by "make dtbs_check".

Fix this by adding the missing "maxItems".  As the architectural maximum
is 4095 interrupts, using that as the limit would be unpractical.  Hence
limit it to 10 interrupts (two interrupts for a system management core,
and two interrupts per core for other cores).  This should be sufficient
for now, and the limit can always be increased when the need arises.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
---
v3:
  - Add Acked-by,

v2:
  - Split in two patches,
  - Improve patch description and document limit rationale.
---
 Documentation/devicetree/bindings/timer/sifive,clint.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index 8d5f4687add9e81e..b75fd6f982b1ecb3 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -44,6 +44,7 @@ properties:
 
   interrupts-extended:
     minItems: 1
+    maxItems: 10
 
 additionalProperties: false
 
-- 
2.25.1

[PATCH v3 1/2] dt-bindings: timer: sifive, clint: Fix number of interrupts

[Geert Uytterhoeven]

The number of interrupts lacks an upper bound, thus assuming one,
causing properly grouped "interrupts-extended" properties to be flagged
as an error by "make dtbs_check".

Fix this by adding the missing "maxItems".  As the architectural maximum
is 4095 interrupts, using that as the limit would be unpractical.  Hence
limit it to 10 interrupts (two interrupts for a system management core,
and two interrupts per core for other cores).  This should be sufficient
for now, and the limit can always be increased when the need arises.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
---
v3:
  - Add Acked-by,

v2:
  - Split in two patches,
  - Improve patch description and document limit rationale.
---
 Documentation/devicetree/bindings/timer/sifive,clint.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index 8d5f4687add9e81e..b75fd6f982b1ecb3 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -44,6 +44,7 @@ properties:
 
   interrupts-extended:
     minItems: 1
+    maxItems: 10
 
 additionalProperties: false
 
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/2] dt-bindings: timer: sifive,clint: Fix number of interrupts

[Anup Patel]

On Fri, Dec 17, 2021 at 6:08 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> The number of interrupts lacks an upper bound, thus assuming one,
> causing properly grouped "interrupts-extended" properties to be flagged
> as an error by "make dtbs_check".
>
> Fix this by adding the missing "maxItems".  As the architectural maximum
> is 4095 interrupts, using that as the limit would be unpractical.  Hence
> limit it to 10 interrupts (two interrupts for a system management core,
> and two interrupts per core for other cores).  This should be sufficient
> for now, and the limit can always be increased when the need arises.

Same comment as the PLIC DT binding patch.

The "maxItems" should represent CLINT spec constraints so
please don't add any synthetic value here.

Regards,
Anup



>
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> v3:
>   - Add Acked-by,
>
> v2:
>   - Split in two patches,
>   - Improve patch description and document limit rationale.
> ---
>  Documentation/devicetree/bindings/timer/sifive,clint.yaml | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> index 8d5f4687add9e81e..b75fd6f982b1ecb3 100644
> --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> @@ -44,6 +44,7 @@ properties:
>
>    interrupts-extended:
>      minItems: 1
> +    maxItems: 10
>
>  additionalProperties: false
>
> --
> 2.25.1
>

Re: [PATCH v3 1/2] dt-bindings: timer: sifive, clint: Fix number of interrupts

[Anup Patel]

On Fri, Dec 17, 2021 at 6:08 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> The number of interrupts lacks an upper bound, thus assuming one,
> causing properly grouped "interrupts-extended" properties to be flagged
> as an error by "make dtbs_check".
>
> Fix this by adding the missing "maxItems".  As the architectural maximum
> is 4095 interrupts, using that as the limit would be unpractical.  Hence
> limit it to 10 interrupts (two interrupts for a system management core,
> and two interrupts per core for other cores).  This should be sufficient
> for now, and the limit can always be increased when the need arises.

Same comment as the PLIC DT binding patch.

The "maxItems" should represent CLINT spec constraints so
please don't add any synthetic value here.

Regards,
Anup



>
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> v3:
>   - Add Acked-by,
>
> v2:
>   - Split in two patches,
>   - Improve patch description and document limit rationale.
> ---
>  Documentation/devicetree/bindings/timer/sifive,clint.yaml | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> index 8d5f4687add9e81e..b75fd6f982b1ecb3 100644
> --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> @@ -44,6 +44,7 @@ properties:
>
>    interrupts-extended:
>      minItems: 1
> +    maxItems: 10
>
>  additionalProperties: false
>
> --
> 2.25.1
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/2] dt-bindings: timer: sifive,clint: Fix number of interrupts

[Rob Herring]

On Fri, Dec 17, 2021 at 6:48 AM Anup Patel <anup@brainfault.org> wrote:
>
> On Fri, Dec 17, 2021 at 6:08 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> >
> > The number of interrupts lacks an upper bound, thus assuming one,
> > causing properly grouped "interrupts-extended" properties to be flagged
> > as an error by "make dtbs_check".
> >
> > Fix this by adding the missing "maxItems".  As the architectural maximum
> > is 4095 interrupts, using that as the limit would be unpractical.  Hence
> > limit it to 10 interrupts (two interrupts for a system management core,
> > and two interrupts per core for other cores).  This should be sufficient
> > for now, and the limit can always be increased when the need arises.
>
> Same comment as the PLIC DT binding patch.
>
> The "maxItems" should represent CLINT spec constraints so
> please don't add any synthetic value here.

I agree.

Geert, are you going to respin these?

Rob

Re: [PATCH v3 1/2] dt-bindings: timer: sifive, clint: Fix number of interrupts

[Rob Herring]

On Fri, Dec 17, 2021 at 6:48 AM Anup Patel <anup@brainfault.org> wrote:
>
> On Fri, Dec 17, 2021 at 6:08 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> >
> > The number of interrupts lacks an upper bound, thus assuming one,
> > causing properly grouped "interrupts-extended" properties to be flagged
> > as an error by "make dtbs_check".
> >
> > Fix this by adding the missing "maxItems".  As the architectural maximum
> > is 4095 interrupts, using that as the limit would be unpractical.  Hence
> > limit it to 10 interrupts (two interrupts for a system management core,
> > and two interrupts per core for other cores).  This should be sufficient
> > for now, and the limit can always be increased when the need arises.
>
> Same comment as the PLIC DT binding patch.
>
> The "maxItems" should represent CLINT spec constraints so
> please don't add any synthetic value here.

I agree.

Geert, are you going to respin these?

Rob

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 1/2] dt-bindings: timer: sifive,clint: Fix number of interrupts

[Geert Uytterhoeven]

Hi Rob,

On Wed, Jan 26, 2022 at 8:37 PM Rob Herring <robh+dt@kernel.org> wrote:
> On Fri, Dec 17, 2021 at 6:48 AM Anup Patel <anup@brainfault.org> wrote:
> > On Fri, Dec 17, 2021 at 6:08 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > The number of interrupts lacks an upper bound, thus assuming one,
> > > causing properly grouped "interrupts-extended" properties to be flagged
> > > as an error by "make dtbs_check".
> > >
> > > Fix this by adding the missing "maxItems".  As the architectural maximum
> > > is 4095 interrupts, using that as the limit would be unpractical.  Hence
> > > limit it to 10 interrupts (two interrupts for a system management core,
> > > and two interrupts per core for other cores).  This should be sufficient
> > > for now, and the limit can always be increased when the need arises.
> >
> > Same comment as the PLIC DT binding patch.
> >
> > The "maxItems" should represent CLINT spec constraints so
> > please don't add any synthetic value here.
>
> I agree.
>
> Geert, are you going to respin these?

Sure, will do, now we have an agreement.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3 1/2] dt-bindings: timer: sifive, clint: Fix number of interrupts

[Geert Uytterhoeven]

Hi Rob,

On Wed, Jan 26, 2022 at 8:37 PM Rob Herring <robh+dt@kernel.org> wrote:
> On Fri, Dec 17, 2021 at 6:48 AM Anup Patel <anup@brainfault.org> wrote:
> > On Fri, Dec 17, 2021 at 6:08 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > The number of interrupts lacks an upper bound, thus assuming one,
> > > causing properly grouped "interrupts-extended" properties to be flagged
> > > as an error by "make dtbs_check".
> > >
> > > Fix this by adding the missing "maxItems".  As the architectural maximum
> > > is 4095 interrupts, using that as the limit would be unpractical.  Hence
> > > limit it to 10 interrupts (two interrupts for a system management core,
> > > and two interrupts per core for other cores).  This should be sufficient
> > > for now, and the limit can always be increased when the need arises.
> >
> > Same comment as the PLIC DT binding patch.
> >
> > The "maxItems" should represent CLINT spec constraints so
> > please don't add any synthetic value here.
>
> I agree.
>
> Geert, are you going to respin these?

Sure, will do, now we have an agreement.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v3 2/2] dt-bindings: timer: sifive,clint: Group interrupt tuples

[Geert Uytterhoeven]

To improve human readability and enable automatic validation, the tuples
in "interrupts-extended" properties should be grouped using angle
brackets.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
v3:
  - Add Reviewed-by,

v2:
  - Split in two patches.
---
 Documentation/devicetree/bindings/timer/sifive,clint.yaml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index b75fd6f982b1ecb3..3b25ec37d81159cb 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -57,10 +57,10 @@ examples:
   - |
     timer@2000000 {
       compatible = "sifive,fu540-c000-clint", "sifive,clint0";
-      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
-                             &cpu2intc 3 &cpu2intc 7
-                             &cpu3intc 3 &cpu3intc 7
-                             &cpu4intc 3 &cpu4intc 7>;
+      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
+                            <&cpu2intc 3>, <&cpu2intc 7>,
+                            <&cpu3intc 3>, <&cpu3intc 7>,
+                            <&cpu4intc 3>, <&cpu4intc 7>;
        reg = <0x2000000 0x10000>;
     };
 ...
-- 
2.25.1

[PATCH v3 2/2] dt-bindings: timer: sifive, clint: Group interrupt tuples

[Geert Uytterhoeven]

To improve human readability and enable automatic validation, the tuples
in "interrupts-extended" properties should be grouped using angle
brackets.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
v3:
  - Add Reviewed-by,

v2:
  - Split in two patches.
---
 Documentation/devicetree/bindings/timer/sifive,clint.yaml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index b75fd6f982b1ecb3..3b25ec37d81159cb 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -57,10 +57,10 @@ examples:
   - |
     timer@2000000 {
       compatible = "sifive,fu540-c000-clint", "sifive,clint0";
-      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
-                             &cpu2intc 3 &cpu2intc 7
-                             &cpu3intc 3 &cpu3intc 7
-                             &cpu4intc 3 &cpu4intc 7>;
+      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
+                            <&cpu2intc 3>, <&cpu2intc 7>,
+                            <&cpu3intc 3>, <&cpu3intc 7>,
+                            <&cpu4intc 3>, <&cpu4intc 7>;
        reg = <0x2000000 0x10000>;
     };
 ...
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v3 2/2] dt-bindings: timer: sifive,clint: Group interrupt tuples

[Rob Herring]

On Fri, Dec 17, 2021 at 01:38:04PM +0100, Geert Uytterhoeven wrote:
> To improve human readability and enable automatic validation, the tuples
> in "interrupts-extended" properties should be grouped using angle
> brackets.
> 
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
> v3:
>   - Add Reviewed-by,

Did you? ;)

Reviewed-by: Rob Herring <robh@kernel.org>

> 
> v2:
>   - Split in two patches.
> ---
>  Documentation/devicetree/bindings/timer/sifive,clint.yaml | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> index b75fd6f982b1ecb3..3b25ec37d81159cb 100644
> --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> @@ -57,10 +57,10 @@ examples:
>    - |
>      timer@2000000 {
>        compatible = "sifive,fu540-c000-clint", "sifive,clint0";
> -      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
> -                             &cpu2intc 3 &cpu2intc 7
> -                             &cpu3intc 3 &cpu3intc 7
> -                             &cpu4intc 3 &cpu4intc 7>;
> +      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
> +                            <&cpu2intc 3>, <&cpu2intc 7>,
> +                            <&cpu3intc 3>, <&cpu3intc 7>,
> +                            <&cpu4intc 3>, <&cpu4intc 7>;
>         reg = <0x2000000 0x10000>;
>      };
>  ...
> -- 
> 2.25.1
> 
> 

Re: [PATCH v3 2/2] dt-bindings: timer: sifive, clint: Group interrupt tuples

[Rob Herring]

On Fri, Dec 17, 2021 at 01:38:04PM +0100, Geert Uytterhoeven wrote:
> To improve human readability and enable automatic validation, the tuples
> in "interrupts-extended" properties should be grouped using angle
> brackets.
> 
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
> v3:
>   - Add Reviewed-by,

Did you? ;)

Reviewed-by: Rob Herring <robh@kernel.org>

> 
> v2:
>   - Split in two patches.
> ---
>  Documentation/devicetree/bindings/timer/sifive,clint.yaml | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> index b75fd6f982b1ecb3..3b25ec37d81159cb 100644
> --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
> @@ -57,10 +57,10 @@ examples:
>    - |
>      timer@2000000 {
>        compatible = "sifive,fu540-c000-clint", "sifive,clint0";
> -      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
> -                             &cpu2intc 3 &cpu2intc 7
> -                             &cpu3intc 3 &cpu3intc 7
> -                             &cpu4intc 3 &cpu4intc 7>;
> +      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
> +                            <&cpu2intc 3>, <&cpu2intc 7>,
> +                            <&cpu3intc 3>, <&cpu3intc 7>,
> +                            <&cpu4intc 3>, <&cpu4intc 7>;
>         reg = <0x2000000 0x10000>;
>      };
>  ...
> -- 
> 2.25.1
> 
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv