All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baolin Wang <baolin.wang@linaro.org>
To: Chanwoo Choi <cw00.choi@samsung.com>
Cc: myungjoo.ham@samsung.com, "Chen-Yu Tsai" <wens@csie.org>,
	Kishon <kishon@ti.com>, "Heiko Stübner" <heiko@sntech.de>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	"Linaro Kernel Mailman List" <linaro-kernel@lists.linaro.org>,
	"Mark Brown" <broonie@kernel.org>, NeilBrown <neilb@suse.com>
Subject: Re: [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set
Date: Wed, 21 Dec 2016 15:57:07 +0800	[thread overview]
Message-ID: <CAMz4kuJxsoPiWGPMU85wNfGeeKq0Vm7Bz7H5yFc9Ls0Ai7+Z7A@mail.gmail.com> (raw)
In-Reply-To: <585A2F61.20403@samsung.com>

Hi,

On 21 December 2016 at 15:29, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> Hi,
>
> On 2016년 12월 21일 15:10, Baolin Wang wrote:
>> According to the documentation, we should set the EXTCON_USB when
>> one SDP charger connector was reported.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>>  drivers/phy/phy-rockchip-inno-usb2.c |    7 ++++++-
>>  1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
>> index 2f99ec9..71fbe0f 100644
>> --- a/drivers/phy/phy-rockchip-inno-usb2.c
>> +++ b/drivers/phy/phy-rockchip-inno-usb2.c
>> @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
>>               if (rport->vbus_attached != vbus_attach) {
>>                       rport->vbus_attached = vbus_attach;
>>
>> -                     if (notify_charger && rphy->edev)
>> +                     if (notify_charger && rphy->edev) {
>>                               extcon_set_cable_state_(rphy->edev,
>>                                                       cable, vbus_attach);
>> +                             if (cable == EXTCON_CHG_USB_SDP)
>> +                                     extcon_set_cable_state_(rphy->edev,
>> +                                                             EXTCON_USB,
>> +                                                             vbus_attach);
>> +                     }
>>               }
>>               break;
>>       case OTG_STATE_B_PERIPHERAL:
>>
>
> Looks good to me. But I prefer to use the 'extcon_set_state_sync' intead of extcon_set_cable_state_().
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> I sent the patches[1] for extcon API to alter the deprecated API.
> If you possible, I'd like you to alter the extcon API instead of deprecated API.

Okay, I will change to extcon_set_state_sync() in next version patch. Thanks.

> [1] https://patchwork.kernel.org/patch/9453645/
> - extcon_set_cable_state_() -> extcon_set_state_sync()
> - extcon_get_cable_state_() -> extcon_get_state()
> - Use devm_extcon_register_notifier() instead of extcon_register_notifier().
>
> --
> Regards,
> Chanwoo Choi



-- 
Baolin.wang
Best Regards

WARNING: multiple messages have this Message-ID
From: baolin.wang@linaro.org (Baolin Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set
Date: Wed, 21 Dec 2016 15:57:07 +0800	[thread overview]
Message-ID: <CAMz4kuJxsoPiWGPMU85wNfGeeKq0Vm7Bz7H5yFc9Ls0Ai7+Z7A@mail.gmail.com> (raw)
In-Reply-To: <585A2F61.20403@samsung.com>

Hi,

On 21 December 2016 at 15:29, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> Hi,
>
> On 2016? 12? 21? 15:10, Baolin Wang wrote:
>> According to the documentation, we should set the EXTCON_USB when
>> one SDP charger connector was reported.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>>  drivers/phy/phy-rockchip-inno-usb2.c |    7 ++++++-
>>  1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
>> index 2f99ec9..71fbe0f 100644
>> --- a/drivers/phy/phy-rockchip-inno-usb2.c
>> +++ b/drivers/phy/phy-rockchip-inno-usb2.c
>> @@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
>>               if (rport->vbus_attached != vbus_attach) {
>>                       rport->vbus_attached = vbus_attach;
>>
>> -                     if (notify_charger && rphy->edev)
>> +                     if (notify_charger && rphy->edev) {
>>                               extcon_set_cable_state_(rphy->edev,
>>                                                       cable, vbus_attach);
>> +                             if (cable == EXTCON_CHG_USB_SDP)
>> +                                     extcon_set_cable_state_(rphy->edev,
>> +                                                             EXTCON_USB,
>> +                                                             vbus_attach);
>> +                     }
>>               }
>>               break;
>>       case OTG_STATE_B_PERIPHERAL:
>>
>
> Looks good to me. But I prefer to use the 'extcon_set_state_sync' intead of extcon_set_cable_state_().
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> I sent the patches[1] for extcon API to alter the deprecated API.
> If you possible, I'd like you to alter the extcon API instead of deprecated API.

Okay, I will change to extcon_set_state_sync() in next version patch. Thanks.

> [1] https://patchwork.kernel.org/patch/9453645/
> - extcon_set_cable_state_() -> extcon_set_state_sync()
> - extcon_get_cable_state_() -> extcon_get_state()
> - Use devm_extcon_register_notifier() instead of extcon_register_notifier().
>
> --
> Regards,
> Chanwoo Choi



-- 
Baolin.wang
Best Regards

  reply	other threads:[~2016-12-21  7:57 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20161221061321epcas2p196fd90254d59164e1195840bdd546fa7@epcas2p1.samsung.com>
2016-12-21  6:10 ` [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* Baolin Wang
2016-12-21  6:10   ` Baolin Wang
2016-12-21  6:10   ` [PATCH 2/3] extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set Baolin Wang
2016-12-21  6:10     ` Baolin Wang
2016-12-21  7:22     ` Chanwoo Choi
2016-12-21  7:22       ` Chanwoo Choi
2016-12-21  7:55       ` Baolin Wang
2016-12-21  7:55         ` Baolin Wang
2016-12-21  7:59         ` Chanwoo Choi
2016-12-21  7:59           ` Chanwoo Choi
2016-12-21  6:10   ` [PATCH 3/3] phy: rockchip-inno-usb2: " Baolin Wang
2016-12-21  6:10     ` Baolin Wang
2016-12-21  7:29     ` Chanwoo Choi
2016-12-21  7:29       ` Chanwoo Choi
2016-12-21  7:57       ` Baolin Wang [this message]
2016-12-21  7:57         ` Baolin Wang
2016-12-21  7:20   ` [PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_* Chanwoo Choi
2016-12-21  7:20     ` Chanwoo Choi
2016-12-21  7:53     ` Baolin Wang
2016-12-21  7:53       ` Baolin Wang
2016-12-21  7:58       ` Chanwoo Choi
2016-12-21  7:58         ` Chanwoo Choi
2016-12-21  7:59         ` Baolin Wang
2016-12-21  7:59           ` Baolin Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAMz4kuJxsoPiWGPMU85wNfGeeKq0Vm7Bz7H5yFc9Ls0Ai7+Z7A@mail.gmail.com \
    --to=baolin.wang@linaro.org \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=heiko@sntech.de \
    --cc=kishon@ti.com \
    --cc=linaro-kernel@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=neilb@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.