[V3 1/4] regulator: 88pm860x: add pre-regulator support for 88pm860x regulator

[haojian.zhuang@gmail.com (Haojian Zhuang)]

On Fri, Jul 6, 2012 at 10:58 AM, Jett.Zhou <jtzhou@marvell.com> wrote:
> Pre-regulator of 88pm8606 is mainly for support charging based on vbus,
> it needs to be enabled for charging battery, and will be disabled in
> some exception condition like over-temp.
> Add the pre-regulator support for 88pm860x regulator driver.
>
> Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
> ---
>  drivers/regulator/88pm8607.c |   66 ++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 66 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
> index c3482b9..3c81fd0 100644
> --- a/drivers/regulator/88pm8607.c
> +++ b/drivers/regulator/88pm8607.c
> @@ -23,6 +23,7 @@ struct pm8607_regulator_info {
>         struct pm860x_chip      *chip;
>         struct regulator_dev    *regulator;
>         struct i2c_client       *i2c;
> +       struct i2c_client       *i2c_8606;
>
>         unsigned int    *vol_table;
>         unsigned int    *vol_suspend;
> @@ -242,6 +243,35 @@ static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
>         return ret;
>  }
>
> +static int pm8606_preg_enable(struct regulator_dev *rdev)
> +{
> +       struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
> +
> +       return pm860x_set_bits(info->i2c, rdev->desc->enable_reg,
> +                              1 << rdev->desc->enable_mask, 0);
> +}
> +
> +static int pm8606_preg_disable(struct regulator_dev *rdev)
> +{
> +       struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
> +
> +       return pm860x_set_bits(info->i2c, rdev->desc->enable_reg,
> +                              1 << rdev->desc->enable_mask,
> +                              1 << rdev->desc->enable_mask);
> +}
> +
> +static int pm8606_preg_is_enabled(struct regulator_dev *rdev)
> +{
> +       struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
> +       int ret;
> +
> +       ret = pm860x_reg_read(info->i2c, rdev->desc->enable_reg);
> +       if (ret < 0)
> +               return ret;
> +
> +       return !((unsigned char)ret & (1 << rdev->desc->enable_mask));
> +}
> +
>  static struct regulator_ops pm8607_regulator_ops = {
>         .list_voltage   = pm8607_list_voltage,
>         .set_voltage_sel = pm8607_set_voltage_sel,
> @@ -251,6 +281,25 @@ static struct regulator_ops pm8607_regulator_ops = {
>         .is_enabled = regulator_is_enabled_regmap,
>  };
>regulator git tree kernel.org
> +static struct regulator_ops pm8606_preg_ops = {
> +       .enable         = pm8606_preg_enable,
> +       .disable        = pm8606_preg_disable,
> +       .is_enabled     = pm8606_preg_is_enabled,regulator git tree kernel.org
> +};
> +
> +#define PM8606_PREG(ereg, ebit)                                                \
> +{                                                                      \
> +       .desc   = {                                                     \
> +               .name   = "PREG",                                       \
> +               .ops    = &pm8606_preg_ops,                             \
> +               .type   = REGULATOR_CURRENT,                            \
> +               .id     = PM8606_ID_PREG,                               \
> +               .owner  = THIS_MODULE,                                  \
> +               .enable_reg = PM8606_##ereg,                            \
> +               .enable_mask = (ebit),                                  \
> +       },                                                              \
> +}
> +
>  #define PM8607_DVC(vreg, ureg, ubit, ereg, ebit)                       \
>  {                                                                      \
>         .desc   = {                                                     \
> @@ -309,6 +358,8 @@ static struct pm8607_regulator_info pm8607_regulator_info[] = {
>         PM8607_LDO(12,        LDO12, 0, SUPPLIES_EN12, 5),
>         PM8607_LDO(13, VIBRATOR_SET, 1, VIBRATOR_SET, 0),
>         PM8607_LDO(14,        LDO14, 0, SUPPLIES_EN12, 6),
> +
> +       PM8606_PREG(PREREGULATORB, 5),
>  };
>
>  static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
> @@ -336,6 +387,8 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
>                 return -EINVAL;
>         }
>         info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
> +       info->i2c_8606 = (chip->id == CHIP_PM8607) ? chip->companion :
> +                       chip->client;
>         info->chip = chip;
>
>         /* check DVC ramp slope double */
> @@ -372,6 +425,18 @@ static int __devexit pm8607_regulator_remove(struct platform_device *pdev)
>         return 0;
>  }
>
> +static struct platform_device_id pm8607_regulator_driveregulator git tree kernel.orgr_ids[] = {
> +       {
> +               .name   = "88pm860x-regulator",
> +               .driver_data    = 0,
> +       }, {
> +               .name   = "88pm860x-preg",
> +               .driver_data    = 0,
> +       },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(platform, pm8607_regulator_driver_ids);
> +
>  static struct platform_driver pm8607_regulator_driver = {regulator git tree kernel.org
>         .driver         = {
>                 .name   = "88pm860x-regulator",
> @@ -379,6 +444,7 @@ static struct platform_driver pm8607_regulator_driver = {
>         },
>         .probe          = pm8607_regulator_probe,
>         .remove         = __devexit_p(pm8607_regulator_remove),
> +       .id_table       = pm8607_regulator_driver_ids,
>  };
>
>  static int __init pm8607_regulator_init(void)
> --
> 1.7.0.4
>

Hi Samuel,

Could you help to merge this patch into your mfd tree also? Although
it's the patch
of regulator, it's depend on the previous patch that is merged into
your mfd tree.

Best Regards
Haojian