All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] ARM: pxa: remove pxa95x support
@ 2012-11-15  9:06 Haojian Zhuang
  2012-11-15 12:06 ` Arnd Bergmann
  0 siblings, 1 reply; 6+ messages in thread
From: Haojian Zhuang @ 2012-11-15  9:06 UTC (permalink / raw)
  To: linux-arm-kernel

PXA95x isn't widely used. And it adds the effort on supporting
multiple platform. So remove it.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
 arch/arm/Kconfig                          |    2 +-
 arch/arm/mach-pxa/Kconfig                 |   34 ----
 arch/arm/mach-pxa/Makefile                |    3 -
 arch/arm/mach-pxa/clock.h                 |    2 +-
 arch/arm/mach-pxa/devices.c               |    8 +-
 arch/arm/mach-pxa/include/mach/hardware.h |   28 ---
 arch/arm/mach-pxa/include/mach/irqs.h     |    1 -
 arch/arm/mach-pxa/include/mach/pxa3xx.h   |    1 -
 arch/arm/mach-pxa/include/mach/pxa95x.h   |    7 -
 arch/arm/mach-pxa/pxa95x.c                |  295 -----------------------------
 arch/arm/mach-pxa/saarb.c                 |  115 -----------
 arch/arm/mach-pxa/tavorevb3.c             |  136 -------------
 arch/arm/plat-pxa/Makefile                |    1 -
 arch/arm/plat-pxa/include/plat/mfp.h      |    4 +-
 drivers/gpio/gpio-pxa.c                   |    2 +-
 15 files changed, 9 insertions(+), 630 deletions(-)
 delete mode 100644 arch/arm/mach-pxa/include/mach/pxa95x.h
 delete mode 100644 arch/arm/mach-pxa/pxa95x.c
 delete mode 100644 arch/arm/mach-pxa/saarb.c
 delete mode 100644 arch/arm/mach-pxa/tavorevb3.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ade7e92..5c7e94f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1168,7 +1168,7 @@ config ARM_NR_BANKS
 config IWMMXT
 	bool "Enable iWMMXt support"
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 11aa739..86eec41 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,27 +2,6 @@ if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-config ARCH_PXA_V7
-	bool "ARMv7 (PXA95x) based systems"
-
-if ARCH_PXA_V7
-comment "Marvell Dev Platforms (sorted by hardware release time)"
-config MACH_TAVOREVB3
-	bool "PXA95x Development Platform (aka TavorEVB III)"
-	select CPU_PXA955
-
-config MACH_SAARB
-	bool "PXA955 Handheld Platform (aka SAARB)"
-	select CPU_PXA955
-endif
-
-config PXA_V7_MACH_AUTO
-	def_bool y
-	depends on ARCH_PXA_V7
-	depends on !MACH_SAARB
-	select MACH_TAVOREVB3
-
-if !ARCH_PXA_V7
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config MACH_PXA3XX_DT
@@ -630,7 +609,6 @@ config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
 	select HAVE_PWM
 	select PXA27x
-endif
 endmenu
 
 config PXA25x
@@ -688,18 +666,6 @@ config CPU_PXA935
 	help
 	  PXA935 (codename Tavor-P65)
 
-config PXA95x
-	bool
-	select CPU_PJ4
-	help
-	  Select code specific to PXA95x variants
-
-config CPU_PXA955
-	bool
-	select PXA95x
-	help
-	  PXA950 (codename MG1)
-
 config PXA_SHARP_C7xx
 	bool
 	select SHARPSL_PM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index ee88d6e..12c5005 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,7 +19,6 @@ endif
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -36,9 +35,7 @@ obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
 obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
-obj-$(CONFIG_MACH_SAARB)	+= saarb.o
 
 # 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 3a258b1..1f65d32 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -57,7 +57,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk);
 
 extern struct syscore_ops pxa2xx_clock_syscore_ops;
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
 #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
 struct clk clk_##_name = {				\
 		.ops	= &clk_pxa3xx_cken_ops,		\
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index ddaa04d..daa86d3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -703,7 +703,7 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 }
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 static struct resource pxa27x_resource_keypad[] = {
 	[0] = {
 		.start	= 0x41500000,
@@ -872,7 +872,7 @@ struct platform_device pxa27x_device_pwm1 = {
 	.resource	= pxa27x_resource_pwm1,
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
 };
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
 #ifdef CONFIG_PXA3xx
 static struct resource pxa3xx_resources_mci2[] = {
@@ -981,7 +981,7 @@ struct platform_device pxa3xx_device_gcu = {
 
 #endif /* CONFIG_PXA3xx */
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
 static struct resource pxa3xx_resources_i2c_power[] = {
 	{
 		.start  = 0x40f500c0,
@@ -1082,7 +1082,7 @@ struct platform_device pxa3xx_device_ssp4 = {
 	.resource	= pxa3xx_resource_ssp4,
 	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
 };
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
+#endif /* CONFIG_PXA3xx */
 
 struct resource pxa_resource_gpio[] = {
 	{
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 56d92e5..ccb06e4 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -194,17 +194,6 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
-#ifdef CONFIG_CPU_PXA955
-#define __cpu_is_pxa955(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x581 || _id == 0xc08		\
-			|| _id == 0xb76;		\
-	})
-#else
-#define __cpu_is_pxa955(id)	(0)
-#endif
-
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -255,10 +244,6 @@
 		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa955()					\
-	({						\
-		__cpu_is_pxa955(read_cpuid_id());	\
-	})
 
 
 /*
@@ -297,15 +282,6 @@
 #define __cpu_is_pxa93x(id)	(0)
 #endif
 
-#ifdef CONFIG_PXA95x
-#define __cpu_is_pxa95x(id)				\
-	({						\
-		__cpu_is_pxa955(id);			\
-	})
-#else
-#define __cpu_is_pxa95x(id)	(0)
-#endif
-
 #define cpu_is_pxa2xx()					\
 	({						\
 		__cpu_is_pxa2xx(read_cpuid_id());	\
@@ -321,10 +297,6 @@
 		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa95x()					\
-	({						\
-		__cpu_is_pxa95x(read_cpuid_id());	\
-	})
 
 /*
  * return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 8765782..48c2fd8 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -84,7 +84,6 @@
 #define IRQ_PXA935_MMC0	PXA_IRQ(72)	/* MMC0 Controller (PXA935) */
 #define IRQ_PXA935_MMC1	PXA_IRQ(73)	/* MMC1 Controller (PXA935) */
 #define IRQ_PXA935_MMC2	PXA_IRQ(74)	/* MMC2 Controller (PXA935) */
-#define IRQ_PXA955_MMC3	PXA_IRQ(75)	/* MMC3 Controller (PXA955) */
 #define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
 
 #define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h
index cd3e57f..6dd7fa1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h
@@ -7,7 +7,6 @@
 
 extern void __init pxa3xx_map_io(void);
 extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
 
 #define pxa3xx_handle_irq	ichp_handle_irq
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h
deleted file mode 100644
index cbb097c..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa95x.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA95X_H
-#define __MACH_PXA95X_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA95X_H */
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
deleted file mode 100644
index 47601f8..0000000
--- a/arch/arm/mach-pxa/pxa95x.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa95x.c
- *
- * code specific to PXA95x aka MGx
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/pxa930.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
-
-static struct clk_lookup pxa95x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-void __init pxa95x_init_irq(void)
-{
-	pxa_init_irq(96, NULL);
-}
-
-/*
- * device registration specific to PXA93x.
- */
-
-void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa95x_init(void)
-{
-	int ret = 0, i;
-
-	if (cpu_is_pxa95x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa95x_mfp_addr_map);
-
-		reset_status = ARSR;
-
-		/*
-		 * clear RDH bit every time after reset
-		 *
-		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
-		 * preserve them here in case they will be referenced later
-		 */
-		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
-		clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
deleted file mode 100644
index 5aded5e..0000000
--- a/arch/arm/mach-pxa/saarb.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/saarb.c
- *
- *  Support for the Marvell Handheld Platform (aka SAARB)
- *
- *  Copyright (C) 2007-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/mfp-pxa930.h>
-#include <mach/pxa95x.h>
-
-#include "generic.h"
-
-#define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
-
-static struct pm860x_touch_pdata saarb_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata saarb_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata saarb_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data saarb_pm8607_info = {
-	.touch		= &saarb_touch,
-	.backlight	= &saarb_backlight[0],
-	.led		= &saarb_led[0],
-	.companion_addr	= 0x10,
-	.irq_mode	= 0,
-	.irq_base	= IRQ_BOARD_START,
-
-	.i2c_port	= GI2C_PORT,
-};
-
-static struct i2c_board_info saarb_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &saarb_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saarb_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
-}
-
-MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= SAARB_NR_IRQS,
-	.init_irq       = pxa95x_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = saarb_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
deleted file mode 100644
index f7d9305..0000000
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/tavorevb3.c
- *
- *  Support for the Marvell EVB3 Development Platform.
- *
- *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
-
-static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
-	/* UART */
-	GPIO53_UART1_TXD,
-	GPIO54_UART1_RXD,
-
-	/* PMIC */
-	PMIC_INT_GPIO83,
-};
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pm860x_touch_pdata evb3_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata evb3_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata evb3_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data evb3_pm8607_info = {
-	.touch				= &evb3_touch,
-	.backlight			= &evb3_backlight[0],
-	.led				= &evb3_led[0],
-	.companion_addr			= 0x10,
-	.irq_mode			= 0,
-	.irq_base			= IRQ_BOARD_START,
-
-	.i2c_port			= GI2C_PORT,
-};
-
-static struct i2c_board_info evb3_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &evb3_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init evb3_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
-}
-#else
-static inline void evb3_init_i2c(void) {}
-#endif
-
-static void __init evb3_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-
-	evb3_init_i2c();
-}
-
-MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-	.atag_offset	= 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= TAVOREVB3_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = evb3_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index af8e484..1fc9419 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -5,7 +5,6 @@
 obj-y	:= dma.o
 
 obj-$(CONFIG_PXA3xx)		+= mfp.o
-obj-$(CONFIG_PXA95x)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 5c79c29..10bc4f3 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t;
 	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
 	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
 /*
  * each MFP pin will have a MFPR register, since the offset of the
  * register varies between processors, the processor specific code
@@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val);
 void mfp_config(unsigned long *mfp_cfgs, int num);
 void mfp_config_run(void);
 void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
 
 #endif /* __ASM_PLAT_MFP_H */
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 98d52cb..6ab8afb 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -448,7 +448,7 @@ static int pxa_gpio_nums(void)
 	} else if (cpu_is_pxa27x()) {
 		count = 120;
 		gpio_type = PXA27X_GPIO;
-	} else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+	} else if (cpu_is_pxa93x()) {
 		count = 191;
 		gpio_type = PXA93X_GPIO;
 	} else if (cpu_is_pxa3xx()) {
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH] ARM: pxa: remove pxa95x support
  2012-11-15  9:06 [PATCH] ARM: pxa: remove pxa95x support Haojian Zhuang
@ 2012-11-15 12:06 ` Arnd Bergmann
  2012-11-15 12:10   ` Haojian Zhuang
  2012-11-15 12:14   ` Arnd Bergmann
  0 siblings, 2 replies; 6+ messages in thread
From: Arnd Bergmann @ 2012-11-15 12:06 UTC (permalink / raw)
  To: linux-arm-kernel

On Thursday 15 November 2012, Haojian Zhuang wrote:
> PXA95x isn't widely used. And it adds the effort on supporting
> multiple platform. So remove it.
> 
> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

Looks good to me, thanks for going through this.

Acked-by: Arnd Bergmann <arnd@arndb.de>

Should I apply this straight into the arm-soc tree, or are you
going to send a pull request?

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] ARM: pxa: remove pxa95x support
  2012-11-15 12:06 ` Arnd Bergmann
@ 2012-11-15 12:10   ` Haojian Zhuang
  2012-11-15 12:14   ` Arnd Bergmann
  1 sibling, 0 replies; 6+ messages in thread
From: Haojian Zhuang @ 2012-11-15 12:10 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, Nov 15, 2012 at 8:06 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 15 November 2012, Haojian Zhuang wrote:
>> PXA95x isn't widely used. And it adds the effort on supporting
>> multiple platform. So remove it.
>>
>> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
>
> Looks good to me, thanks for going through this.
>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> Should I apply this straight into the arm-soc tree, or are you
> going to send a pull request?

Yes, please apply it into arm-soc tree directly.

Regards
Haojian

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] ARM: pxa: remove pxa95x support
  2012-11-15 12:06 ` Arnd Bergmann
  2012-11-15 12:10   ` Haojian Zhuang
@ 2012-11-15 12:14   ` Arnd Bergmann
  2012-11-15 12:24     ` Haojian Zhuang
  1 sibling, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2012-11-15 12:14 UTC (permalink / raw)
  To: linux-arm-kernel

On Thursday 15 November 2012, Arnd Bergmann wrote:
> On Thursday 15 November 2012, Haojian Zhuang wrote:
> > PXA95x isn't widely used. And it adds the effort on supporting
> > multiple platform. So remove it.
> > 
> > Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
> 
> Looks good to me, thanks for going through this.
> 
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> 
> Should I apply this straight into the arm-soc tree, or are you
> going to send a pull request?
> 

One more comment: It would be good to put a disclaimer into the
changeset text like

 "The assumption is that nobody will miss this support. If you are
  reading this text because you actually require pxa95x support on
  a new kernel, we can work out a way to revert this patch or add
  support to the mmp platform".

	Arnd

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] ARM: pxa: remove pxa95x support
  2012-11-15 12:14   ` Arnd Bergmann
@ 2012-11-15 12:24     ` Haojian Zhuang
  2012-11-15 12:52       ` Arnd Bergmann
  0 siblings, 1 reply; 6+ messages in thread
From: Haojian Zhuang @ 2012-11-15 12:24 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, Nov 15, 2012 at 8:14 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 15 November 2012, Arnd Bergmann wrote:
>> On Thursday 15 November 2012, Haojian Zhuang wrote:
>> > PXA95x isn't widely used. And it adds the effort on supporting
>> > multiple platform. So remove it.
>> >
>> > Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
>>
>> Looks good to me, thanks for going through this.
>>
>> Acked-by: Arnd Bergmann <arnd@arndb.de>
>>
>> Should I apply this straight into the arm-soc tree, or are you
>> going to send a pull request?
>>
>
> One more comment: It would be good to put a disclaimer into the
> changeset text like
>
>  "The assumption is that nobody will miss this support. If you are
>   reading this text because you actually require pxa95x support on
>   a new kernel, we can work out a way to revert this patch or add
>   support to the mmp platform".
>
>         Arnd

Yes, it's great. Please help to paste it into the changeset.

Best Regards
Haojian

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] ARM: pxa: remove pxa95x support
  2012-11-15 12:24     ` Haojian Zhuang
@ 2012-11-15 12:52       ` Arnd Bergmann
  0 siblings, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2012-11-15 12:52 UTC (permalink / raw)
  To: linux-arm-kernel

On Thursday 15 November 2012, Haojian Zhuang wrote:
> On Thu, Nov 15, 2012 at 8:14 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Thursday 15 November 2012, Arnd Bergmann wrote:
> >
> >  "The assumption is that nobody will miss this support. If you are
> >   reading this text because you actually require pxa95x support on
> >   a new kernel, we can work out a way to revert this patch or add
> >   support to the mmp platform".
> 
> Yes, it's great. Please help to paste it into the changeset.
> 

Ok, applied.

	Arnd

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-11-15 12:52 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-15  9:06 [PATCH] ARM: pxa: remove pxa95x support Haojian Zhuang
2012-11-15 12:06 ` Arnd Bergmann
2012-11-15 12:10   ` Haojian Zhuang
2012-11-15 12:14   ` Arnd Bergmann
2012-11-15 12:24     ` Haojian Zhuang
2012-11-15 12:52       ` Arnd Bergmann

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.