From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rick Chen Date: Fri, 14 Aug 2020 08:37:33 +0800 Subject: [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210 In-Reply-To: <03338b16-bb90-9bd2-b7bc-6f42616dcae1@gmail.com> References: <20200624102947.359794-1-seanga2@gmail.com> <03338b16-bb90-9bd2-b7bc-6f42616dcae1@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Sean > On 6/24/20 6:29 AM, Sean Anderson wrote: > > This patch series adds support for pinmuxing, gpios, and leds on the Kendyte > > K210. > > > > This patch series was previously part of > > https://patchwork.ozlabs.org/project/uboot/list/?series=161576 > > > > This patch series depends on > > https://patchwork.ozlabs.org/project/uboot/list/?series=178480 > > > > Changes in v4: > > - Add sandbox dt-binding headers to MAINTAINERS > > - Add test for led behavior > > - Add test/dm/pinmux.c to patch > > - Move sandbox_* variables into a priv structure. This resets them to the > > default state every time we re-probe. > > - Reformat documentation in dm/pinctrl.h > > > > Changes in v3: > > - Add dt-bindings/pinctrl/sandbox-pinmux.h to patch > > > > Changes in v2: > > - Add test for pinmuxing > > - Don't clear existing pinctrl settings on probe > > - Re-order GPIOs to match the defaults more closely > > - Rebase onto v13 of "riscv: Add Sipeed Maix support" > > - Rewrite FPIOA driver to use pinmux property > > - Support muxing the output enable signal for each function in the FPIOA > > - Support output and input inversion in the pinmux driver > > - Support pinmux property in pinctrl-generic > > > > Sean Anderson (12): > > pinctrl: Add pinmux property support to pinctrl-generic > > pinctrl: Reformat documentation in dm/pinctrl.h > > test: pinmux: Add test for pin muxing > > pinctrl: Add support for Kendryte K210 FPIOA > > gpio: sifive: Use generic reg read function > > gpio: dw: Fix warnings about casting int to pointer > > gpio: dw: Add a trailing underscore to generated name > > gpio: dw: Return output value when direction is out > > led: gpio: Default to using node name if label is absent > > test: dm: Test for default led naming > > riscv: Add pinmux and gpio bindings for Kendryte K210 > > riscv: Add FPIOA and GPIO support for Kendryte K210 > > > > MAINTAINERS | 3 + > > arch/riscv/dts/k210-maix-bit.dts | 104 +++ > > arch/riscv/dts/k210.dtsi | 12 + > > arch/sandbox/dts/test.dts | 47 +- > > board/sipeed/maix/Kconfig | 9 + > > doc/board/sipeed/maix.rst | 64 +- > > .../pinctrl/kendryte,k210-fpioa.txt | 102 +++ > > .../pinctrl/pinctrl-bindings.txt | 65 +- > > drivers/gpio/dwapb_gpio.c | 33 +- > > drivers/gpio/sifive-gpio.c | 2 +- > > drivers/led/led_gpio.c | 7 +- > > drivers/pinctrl/Kconfig | 1 + > > drivers/pinctrl/Makefile | 1 + > > drivers/pinctrl/kendryte/Kconfig | 7 + > > drivers/pinctrl/kendryte/Makefile | 1 + > > drivers/pinctrl/kendryte/pinctrl.c | 678 ++++++++++++++++++ > > drivers/pinctrl/kendryte/pinctrl.h | 70 ++ > > drivers/pinctrl/pinctrl-generic.c | 125 +++- > > drivers/pinctrl/pinctrl-sandbox.c | 186 +++-- > > include/dm/pinctrl.h | 360 +++++++--- > > include/dt-bindings/pinctrl/k210-pinctrl.h | 277 +++++++ > > include/dt-bindings/pinctrl/sandbox-pinmux.h | 19 + > > test/dm/Makefile | 3 + > > test/dm/led.c | 3 +- > > test/dm/pinmux.c | 57 ++ > > test/py/tests/test_pinmux.py | 36 +- > > 26 files changed, 2027 insertions(+), 245 deletions(-) > > create mode 100644 doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt > > create mode 100644 drivers/pinctrl/kendryte/Kconfig > > create mode 100644 drivers/pinctrl/kendryte/Makefile > > create mode 100644 drivers/pinctrl/kendryte/pinctrl.c > > create mode 100644 drivers/pinctrl/kendryte/pinctrl.h > > create mode 100644 include/dt-bindings/pinctrl/k210-pinctrl.h > > create mode 100644 include/dt-bindings/pinctrl/sandbox-pinmux.h > > create mode 100644 test/dm/pinmux.c > > > > Rick can you put this in your rc3 PR? I think there are reviews for all > patches in this series. > OK, but it conflicts with u-boot/master Applying: pinctrl: Add pinmux property support to pinctrl-generic Applying: pinctrl: Reformat documentation in dm/pinctrl.h Applying: test: pinmux: Add test for pin muxing Applying: pinctrl: Add support for Kendryte K210 FPIOA Applying: gpio: sifive: Use generic reg read function error: patch failed: drivers/gpio/sifive-gpio.c:159 error: drivers/gpio/sifive-gpio.c: patch does not apply Patch failed at 0005 gpio: sifive: Use generic reg read function Thanks, Rick > --Sean