Can you drop insane_skip for a moment and show what errors then happen?

Alex

On Tue 7. Jun 2022 at 22.57, Rudolf J Streif <rudolf.streif@ibeeto.com>
wrote:

>
> On 6/7/22 12:44 PM, Alexander Kanavin wrote:
> > Can you show the recipe that you wrote for the blob?
>
> Not exactly as is because of customer names, but below is a sanitized
> version:
>
>
> SUMMARY = "Binary Stuff"
>
> LICENSE = "CLOSED"
>
> SRC_URI = "file://binary_installer.tgz \
>            "
>
> do_install() {
>
>      install -d -m 0755 ${D}/opt/binstuff
>
>      tar cf - -C ${WORKDIR}/opt/binstuff . | tar xf - -C ${D}/binstuff
>
> }
>
> FILES:${PN} = "/opt/binstuff"
>
>
> RDEPENDS:${PN} += "libsystemd libudev libgpiod wayland"
> INSANE_SKIP:${PN} += "ldflags file-rdeps arch staticdev"
>
> The recipe itself builds just fine and creates the RPM package. However,
> the some of the binaries inside the package have been built against
> shared libs of older versions. The libs are there of course but with the
> wrong version. Adding file-rdeps to INSANE_SKIP addresses this at build
> time. But when installing the package in the rootfs dnf does a
> dependency check which then fails.
>
> I don't know if there is an elegant way of overriding dnf to force
> installation of the package.
>
>
> >
> > Alex
> >
> > On Tue, 7 Jun 2022 at 20:59, Rudolf J Streif <rudolf.streif@ibeeto.com>
> wrote:
> >> I have been handed a binary package that I am integrating into a Yocto
> >> build.
> >>
> >> When dnf runs it complains about missing dependencies. These are
> >> standard libraries of course but the culprit is the incompatible
> >> version. The software runs fine when I install it on the target using
> >> the script/tar installation it comes with. Needless to say that YP
> >> packaging QA complains about this already when assembling the package.
> >> However, there I can silence the complaints with INSANE_SKIP.
> >>
> >> Unfortunately I have not found a method doing the same when the package
> >> is installed by the image class.
> >>
> >> Is there an elegant way around it?
> >>
> >>
> >> Error:
> >>    Problem: conflicting requests
> >>     - nothing provides libdl.so.2 needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libdl.so.2(GLIBC_2.0) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libdl.so.2(GLIBC_2.1) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libgcc_s.so.1 needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libgcc_s.so.1(GCC_3.0) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libm.so.6 needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libm.so.6(GLIBC_2.0) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libm.so.6(GLIBC_2.1) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libpthread.so.0 needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libpthread.so.0(GLIBC_2.0) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libpthread.so.0(GLIBC_2.1) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libpthread.so.0(GLIBC_2.2) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides libpthread.so.0(GLIBC_2.3.2) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides librt.so.1 needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >>     - nothing provides librt.so.1(GLIBC_2.2) needed by
> >> xxx-single-group-0.1-r0.cortexa53_crypto
> >> (try to add '--skip-broken' to skip uninstallable packages)
> >>
> >>
> >> --
> >> Rudolf J Streif
> >> CEO/CTO ibeeto
> >> +1.855.442.3386 x700
> >>
> >>
> >> -=-=-=-=-=-=-=-=-=-=-=-
> >> Links: You receive all messages sent to this group.
> >> View/Reply Online (#57296):
> https://lists.yoctoproject.org/g/yocto/message/57296
> >> Mute This Topic: https://lists.yoctoproject.org/mt/91607892/1686489
> >> Group Owner: yocto+owner@lists.yoctoproject.org
> >> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [
> alex.kanavin@gmail.com]
> >> -=-=-=-=-=-=-=-=-=-=-=-
> >>
> --
> Rudolf J Streif
> CEO/CTO ibeeto
> +1.855.442.3386 x700
>
>