Hi:
    I have change u-boot-fslc from branch "patches-2014.01" to "patches-2014.07" this week.

    I notice that gpio_get_value( ) always return 0, no matter I set the bit 0 or 1.

    when I test gpio by adding #define CONFIG_CMD_GPIO in uboot_src/include/configs/mx6sabresd.h
and using gpio toggle <gpio_pin> to toggle gpio for 3 ~ 4 times, it will failed to change the gpio polarity.

    Does anyone have the same issue on i.mx6Q sabreSD board?

Wally

2014-09-12 4:40 GMT+08:00 Otavio Salvador <otavio@ossystems.com.br>:
This updates the 2014.07-based branch with more backports from the
2014.10 upcoming release. The following changes are included:

318d1cd mx6sxsabresd: Add PCI support
919802d pcie_imx: Add mx6solox support
847d6ce mx6: imx-regs: Provide a structure for GPC registers
f26e33b mx6qsabreauto: Remove imx6q-sabreauto.dts
f22fd9d imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent
e45540b arm: vf610: lpuart: disable FIFO on initializaton
11571b6 arm: vf610: lpuart: fix status register handling
09e81f4 mx6: Fix ECSPI typo in soc_boot_modes
b8d5d42 imximage: Fix imximage IVT bug for EIM-NOR boot
228135e iMX6: Disable the L2 before chaning the PL310 latency
45108f1 tools: imximage: Fix the maximum DCD size for mx53/mx6
9f3f181 pci: add support for board_pci_fixup_dev function
4ecf3e6 arm: mx6: add get_cpu_type()
b6faaf1 arm: mx6: ddr: fix cs0_end calculation
07917e7 arm: mx6: ddr: configure MMDC for slow_pd
66b2f14 arm: mx6: ddr: do not write into reserved bit
b3f847e arm: mx6: ddr: cleanup
eba02a9 i2c: imx: add macros to setup pads for multiple SoC types
e50e740 sata: dwc_ahsata: implement sata_port_status
a45361d compulab: eeprom: add support for defining eeprom i2c bus
8f82ddd mx6: add clock enabling functions
5305489 net: fec_mxc: Poll FEC_TBD_READY after polling TDAR
d5e440b net: fec_mxc: Adjust RX DMA alignment for mx6solox
fca8b5a usb: ci_udc: implement dfu_usb_get_reset
7baddea arm: Add missing .vectors section to linker scripts
324df11 arm: vf610: add NFC clock support
10c68b2 arm: vf610: add NFC pin mux
9bba571 ARM: Fix overflow in MMU setup
7be9add api: fix build without CMD_NET support
8a9e527 e1000: add i210 support
dcd2c8c e1000: Implement dcache support

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
 recipes-bsp/u-boot/u-boot-fslc-mxsboot_2014.07.bb | 2 +-
 recipes-bsp/u-boot/u-boot-fslc_2014.07.bb         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2014.07.bb b/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2014.07.bb
index 8ea75ca..8e4331b 100644
--- a/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2014.07.bb
+++ b/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2014.07.bb
@@ -7,7 +7,7 @@ PROVIDES = "u-boot-mxsboot"

 PV = "v2014.07"

-SRCREV = "a824e891767f8bd15edf54013e23639a3228dc24"
+SRCREV = "318d1cd6bd6368316cc590e5985614a6fd0ffe82"
 SRCBRANCH = "patches-2014.07"
 SRC_URI = "git://github.com/Freescale/u-boot-imx.git;branch=${SRCBRANCH}"

diff --git a/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb b/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
index b219161..3dee9fa 100644
--- a/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
+++ b/recipes-bsp/u-boot/u-boot-fslc_2014.07.bb
@@ -2,5 +2,5 @@ include u-boot-fslc.inc

 PV = "v2014.07"

-SRCREV = "a824e891767f8bd15edf54013e23639a3228dc24"
+SRCREV = "318d1cd6bd6368316cc590e5985614a6fd0ffe82"
 SRCBRANCH = "patches-2014.07"
--
2.1.0

--
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale