From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joe Hershberger Date: Tue, 26 Jan 2016 10:13:33 -0600 Subject: [U-Boot] [PATCH v2 0/2] net: phy: mv88e61xx: Revise as a PHY driver In-Reply-To: <20160126170959.32bbae7c@lilith> References: <1450734319-9515-1-git-send-email-kevin.smith@elecsyscorp.com> <1450734319-9515-2-git-send-email-kevin.smith@elecsyscorp.com> <20160126170959.32bbae7c@lilith> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Albert, On Tue, Jan 26, 2016 at 10:09 AM, Albert ARIBAUD wrote: > Hello Kevin, > > On Mon, 21 Dec 2015 21:45:32 +0000, Kevin Smith > wrote: >> The previous version of this driver implemented a shell command to manually >> comfigure the switch. It did not integrate with the PHY infrastructure to >> allow a MAC to use it as its PHY. This is a complete rewrite to allow this >> switch to function as a driver. Since none of the original driver remains, the >> old driver is first removed and the new PHY driver is added. >> >> This version configures the switch to have a CPU connected over an MII >> interface. It will enable PHY interfaces based on the MV88E61XX_PHY_PORTS >> macro. The switch is configured to allow PHY ports to only communicate to the >> CPU. This allows the switch to be used as a basic PHY on any/all ports. >> >> This was developed on a board with an mv88e6176 connected over SGMII. It is >> intended to work with other configurations, but these could not be tested. Any >> testing on other configurations or with other mv88e61xx chips is appreciated. > > Actually the driver was for the Wireless Space, which was removed but > which I will resurrect as I did the Open-RDs. I will test the switch on > the WS I have. That's great. I'm currently reviewing the new driver and will appreciate the testing. I don't have any boards with this switch. Thanks, -Joe