From mboxrd@z Thu Jan  1 00:00:00 1970
From: Joe Hershberger <joe.hershberger@gmail.com>
Date: Thu, 15 Jan 2015 15:42:47 -0600
Subject: [U-Boot] [PATCH v3 05/11] net/vsc9953: Add driver for Vitesse
 VSC9953 L2 Switch IP
In-Reply-To: <1421064519-6248-6-git-send-email-codrin.ciubotariu@freescale.com>
References: <1421064519-6248-1-git-send-email-codrin.ciubotariu@freescale.com>
	<1421064519-6248-6-git-send-email-codrin.ciubotariu@freescale.com>
Message-ID: <CANr=Z=ZTxOvdk8Z+gTY178TAtepkxKF0HDHWoXk+9P1-M9tg7Q@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, Jan 12, 2015 at 6:08 AM, Codrin Ciubotariu <
codrin.ciubotariu@freescale.com> wrote:
>
> This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP
> is integrated in Freescale T1040 and T1020 SoCs.
> The L2 switch has 10 Ethernet ports: 2 internal fixed-links
> (ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps.
> The external ports may be connected to PHYs over QSGMII and SGMII.
>
> Commands have also been added to enable/disable a port and to
> check a port's link speed, duplexity and status. The commands are:
>
> ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
> ethsw port <port_nr> show - show an l2 switch port's configuration
>
> port_nr=0..9; use "all" for all ports
>
> For more detailse please see doc/README.t1040-l2switch
>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>

Acked-by: Joe Hershberger <joe.hershberger@ni.com>