From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joe Hershberger Date: Fri, 10 May 2019 21:50:45 +0000 Subject: [U-Boot] Pull request: u-boot-net.git master In-Reply-To: References: <201905072215.x47MFDuv034108@osboxes.amer.corp.natinst.com> <20190508224208.GV25571@bill-the-cat> <20190508224849.GW25571@bill-the-cat> <20190508225455.GX25571@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Vladimir and Tom, On Thu, May 9, 2019 at 7:51 AM Vladimir Oltean wrote: > > On 09.05.2019 02:05, Vladimir Oltean wrote: > > On 5/9/19 1:55 AM, Tom Rini wrote: > >> On Wed, May 08, 2019 at 10:52:28PM +0000, Vladimir Oltean wrote: > >>> On 5/9/19 1:48 AM, Tom Rini wrote: > >>>> On Wed, May 08, 2019 at 10:45:50PM +0000, Vladimir Oltean wrote: > >>>>> On 5/9/19 1:42 AM, Tom Rini wrote: > >>>>>> On Wed, May 08, 2019 at 10:40:57PM +0000, Vladimir Oltean wrote: > >>>>>>> On 5/9/19 1:24 AM, Joe Hershberger wrote: > >>>>>>>> On Tue, May 7, 2019 at 5:15 PM Joe Hershberger wrote: > >>>>>>>>> > >>>>>>>>> Hi Tom, > >>>>>>>>> > >>>>>>>>> The following changes since commit 8d7f06bbbef16f172cd5e9c4923cdcebe16b8980: > >>>>>>>>> > >>>>>>>>> I rebased on your master and built for BB Black. DHCP seems to work fine. > >>>>>>>>> MLO also now fits again. > >>>>>>>>> > >>>>>>>>> Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-05-07 09:38:00 -0400) > >>>>>>>>> > >>>>>>>>> are available in the git repository at: > >>>>>>>>> > >>>>>>>>> git://git.denx.de/u-boot-net.git master > >>>>>>>>> > >>>>>>>>> for you to fetch changes up to 8d0c6858455e89b089222a08d55ff711681ca011: > >>>>>>>>> > >>>>>>>>> net: phy: micrel: Find Micrel PHY node correctly (2019-05-07 14:51:55 -0500) > >>>>>>>>> > >>>>>>>>> ---------------------------------------------------------------- > >>>>>>>>> Carlo Caione (4): > >>>>>>>>> net: phy: Add generic helpers to access MMD PHY registers > >>>>>>>>> net: phy: ti: use generic helpers to access MMD registers > >>>>>>>>> cmd: mdio: Switch to generic helpers when accessing the registers > >>>>>>>>> net: phy: realtek: Introduce quirk to mark RXC not stoppable > >>>>>>>>> > >>>>>>>>> James Byrne (2): > >>>>>>>>> net: phy: micrel: Use correct skew values on KSZ9021 > >>>>>>>>> net: phy: micrel: Find Micrel PHY node correctly > >>>>>>>>> > >>>>>>>>> Murali Karicheri (2): > >>>>>>>>> ARM: k2g-gp-evm: update to rgmii pinmux configuration > >>>>>>>>> ARM: k2g-ice: Add pinmux support for rgmii interface > >>>>>>>>> > >>>>>>>>> Pankaj Bansal (1): > >>>>>>>>> drivers: net: ldpaa_eth: fix resource leak > >>>>>>>>> > >>>>>>>>> Siva Durga Prasad Paladugu (2): > >>>>>>>>> net: phy: Reloc next and prev pointers inside phy_drivers > >>>>>>>>> net: phy: Fix return value check phy_probe > >>>>>>>>> > >>>>>>>>> Valentin-catalin Neacsu (1): > >>>>>>>>> net: phy: aquantia: Set only autoneg on in register 4.c441 > >>>>>>>>> > >>>>>>>>> Vladimir Oltean (6): > >>>>>>>>> net: phy: ar803x: Address packet drops at low traffic rate due to SmartEEE feature > >>>>>>>>> net: phy: ar803x: Make RGMII Tx delays actually configurable for AR8035 > >>>>>>>>> net: phy: ar803x: Use common functions for RGMII internal delays > >>>>>>>>> net: phy: ar803x: Clarify the configuration of the CLK_25M output pin > >>>>>>>>> net: phy: ar803x: Explicitly disable RGMII delays > >>>>>>>> > >>>>>>>> Tom, this [1] is the patch that is breaking the evm. It doesn't affect > >>>>>>>> BB Black because it uses an SMSC phy, where as this evm uses an > >>>>>>>> AR8031/AR8033. > >>>>>>>> > >>>>>>>> Is it possible the device tree [2] is wrong for the board? It lists > >>>>>>>> 'phy-mode = "rgmii-txid";', so that means that with this patch the RX > >>>>>>>> delay is now being disabled. > >>>>>>>> > >>>>>>>> Any thoughts, Vladimir? > >>>>>>>> > >>>>>>>> Thanks, > >>>>>>>> -Joe > >>>>>>>> > >>>>>>>> [1] b3224e0f7e - "net: phy: ar803x: Explicitly disable RGMII delays" > >>>>>>>> [2] arch/arm/dts/am335x-evm.dts > >>>>>>>> > >>>>>>>>> net: phy: ar803x: Clarify the intention of ar8021_config > >>>>>>>>> > >>>>>>>>> arch/arm/dts/sama5d3xcm.dtsi | 32 +++--- > >>>>>>>>> arch/arm/dts/sama5d3xcm_cmp.dtsi | 32 +++--- > >>>>>>>>> arch/arm/dts/socfpga_arria5_socdk.dts | 4 +- > >>>>>>>>> arch/arm/dts/socfpga_cyclone5_is1.dts | 4 +- > >>>>>>>>> arch/arm/dts/socfpga_cyclone5_socdk.dts | 4 +- > >>>>>>>>> arch/arm/dts/socfpga_cyclone5_sockit.dts | 4 +- > >>>>>>>>> arch/arm/dts/socfpga_cyclone5_vining_fpga.dts | 4 +- > >>>>>>>>> board/ti/ks2_evm/mux-k2g.h | 36 +++---- > >>>>>>>>> cmd/mdio.c | 27 +++-- > >>>>>>>>> doc/device-tree-bindings/net/micrel-ksz90x1.txt | 27 +++++ > >>>>>>>>> drivers/net/ldpaa_eth/ldpaa_eth.c | 1 + > >>>>>>>>> drivers/net/phy/Kconfig | 41 ++++++++ > >>>>>>>>> drivers/net/phy/aquantia.c | 7 +- > >>>>>>>>> drivers/net/phy/atheros.c | 128 ++++++++++++++++------- > >>>>>>>>> drivers/net/phy/micrel_ksz90x1.c | 24 ++++- > >>>>>>>>> drivers/net/phy/phy.c | 21 +++- > >>>>>>>>> drivers/net/phy/realtek.c | 19 ++++ > >>>>>>>>> drivers/net/phy/ti.c | 130 +++++------------------- > >>>>>>>>> include/phy.h | 70 +++++++++++++ > >>>>>>>>> 19 files changed, 394 insertions(+), 221 deletions(-) > >>>>>>>>> > >>>>>>>>> Thanks! > >>>>>>>>> -Joe > >>>>>>>>> _______________________________________________ > >>>>>>>>> U-Boot mailing list > >>>>>>>>> U-Boot at lists.denx.de > >>>>>>>>> https://lists.denx.de/listinfo/u-boot > >>>>>>>> > >>>>>>> > >>>>>>> Hi Joe, Tom, > >>>>>>> > >>>>>>> It sounds like what Joe pointed to (my patch) has a high chance of > >>>>>>> causing link failure. > >>>>>>> If the board is relying on RX delays in the Atheros PHY to ensure > >>>>>>> correct RGMII timing budget, then for sure it was working before and now > >>>>>>> it is broken. In that case, it was working by mistake; the DT blob is > >>>>>>> broken and should be corrected. > >>>>>>> Sorry for the trouble this has caused. > >>>>>> > >>>>>> How is this handled in the Linux kernel and/or why doesn't it fail > >>>>>> there? > >>>>> > >>>>> On the latest net-next, it's handled the same: disable everything and > >>>>> enable only what's specified in phy-mode. I didn't keep track of older > >>>>> versions. > >>>> > >>>> So you would expect the network to be broken on net-next with this DTS? > >>>> Because that's not allowed... > >>>> > >>> > >>> Yes, if it's the same problem, the behavior should be the same. > >>> I see net-next is only rejecting the bad DT since 2019-02-21: > >>> https://patchwork.kernel.org/patch/10819279/ > >>> So it depends when you checked it last time. > >> > >> I'll see about testing eth in Linux with net-next tomorrow, but, uh, is > >> there some work-around for the DTS so that ethernet works? > > > > Work-around in Linux or in U-boot? > > U-boot can fix up the DT for Linux and replace "rgmii-txid" with > > "rgmii-id", whereas neither Linux nor U-boot can do anything for > > themselves except either load a correct DT blob, or not use (revert, not > > upgrade to, etc) the enforcing patch. > > > >> You cannot break existing DTs > > RGMII delay breakages happen all the time. To play the devil's advocate, > > protecting against them should be done by observing the semantics > > described in the devicetree/bindings document. > > If you follow Linux net-next, a breakage for RTL8211F is planned out > > right as we speak. > > > > But let's wait until we know for sure that this is what's causing the > > issues. > > > > Regards, > > -Vladimir > > > > Hi Tom, > > I understand now what you mean by "workaround". > Yes you can enable RGMII delays by hand in U-boot: > > Check if RX delay is enabled (bit 15 of debug register 0): > => mdio write eTSEC1 0x1D 0 > => mdio read eTSEC1 0x1E > => mdio write eTSEC1 0x1E > > Check if TX delay is enabled (bit 8 of debug register 5): > => mdio write eTSEC1 0x1D 5 > => mdio read eTSEC1 0x1E > => mdio write eTSEC1 0x1E > > Replace eTSEC1 with your net device from "mdio list". I'm not sure what the follow-on action is here. I'll hold off on Vladimir's series until there is a resolution that everyone is satisfied with. Cheers, -Joe