From: Pooja Sanjay More <pooja.sm@pathpartnertech.com>
To: "Bird, Tim" <Tim.Bird@sony.com>
Cc: "tbird20d@yahoo.com" <tbird20d@yahoo.com>,
"fuego@lists.linuxfoundation.org"
<fuego@lists.linuxfoundation.org>
Subject: Re: [Fuego] Please switch server to fuegotest.org (was RE: poll request scheduling)
Date: Mon, 21 Dec 2020 18:43:04 +0530 [thread overview]
Message-ID: <CAO08rzsY4fGS+AjgZizm12CVaSMRf47sgRF5UGHqj9w6psBLDw@mail.gmail.com> (raw)
In-Reply-To: <CAO08rzvSG6M5629gxyu9M62kUwtYaZT-KmAeXoLv8QLKvsgnpw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 6012 bytes --]
Hi Tim,
Run test still doesn't update the result object on fserver.
*poll request log:*
root@cpu-366U:/# fuego-core/scripts/poll_requests.sh
== Polling server "fuegotest.org/cgi-bin" for requests ==
Processing requests for any board
Waiting 60 seconds between polls of the server.
Running forever (no specified duration)
Type Ctrl-C to exit
Checking
Running request: request-2020-12-21_11:22:58.84-pptlab:rpi
Trying to get request 'request-2020-12-21_11:22:58.84-pptlab:rpi' from
server
Executing test Functional.hello_world on board rpi (using spec default)
Running test 'Functional.hello_world' on board 'rpi' using spec 'default'
===== doing fuego phase: pre_test =====
===== doing fuego phase: build =====
The test is already built
Fuego test_build duration=0 seconds
===== doing fuego phase: deploy =====
===== doing fuego phase: snapshot =====
Firmware revision: 5.4.83-v7-51+
===== doing fuego phase: run =====
-------------------------------------------------
Hello World!
This is a test program, to demonstrate test success and failure
Test result: SUCCESS
-------------------------------------------------
===== doing fuego phase: post_test =====
===== doing fuego phase: processing =====
log_compare: pattern 'SUCCESS' found 1 times (expected greater or equal
than 1)
chart config not found. Using default values.
Fuego: requested test phases complete!
Packaging run 'Functional.hello_world-default-104-rpi'
run/
run/machine-snapshot.txt
run/syslog.before.txt
run/devlog.txt
run/testlog.txt
run/run.json
run/syslog.after.txt
run/prolog.sh
run/spec.json
run/build.xml
run/consolelog.txt
Run packaged successfully, and is at:
/tmp/run-Functional.hello_world-default-104-on-pptlab:rpi.frp
Can't put run to server
Server returned message:
Run Functional.hello_world-default-104-rpi put to server
Checking Waiting ..................................
Also we have installed "ttc" outside the container and configured it for
basic commands like
console and login, it's working for rpi board.
Thanks and regards,
Pooja More
On Wed, Dec 16, 2020 at 9:16 PM Pooja Sanjay More <
pooja.sm@pathpartnertech.com> wrote:
> Hi Tim,
>
> We have configured the fuego to fuegotest.org server.
> We tried put-request and run-request for rpi board after
> configuring it to fuegotest.org, it's working fine.
> But the test run does not create a link for test result object on fserver.
> We have scheduled a poll request for the rpi board.
>
>
> Thanks and Regards,
> Pooja More
>
>
> On Wed, Dec 16, 2020 at 8:59 AM Bird, Tim <Tim.Bird@sony.com> wrote:
>
>> My Internet provider currently has some routing issues that prevent me
>> from accessing birdcloud.org. People outside my network have no
>> problems,
>> but I can't access from my home network. I've been working to get the
>> issues resolved, but currently, I cannot submit jobs to the Fuego server
>> on birdcloud.org.
>>
>> Therefore, I have transitioned my work to the main public Fuego
>> server on fuegotest.org.
>>
>> Can you please switch your Fuego configuration to use the fuegotest.org
>> server, instead of birdcloud.org?
>>
>> Please change the value of "server_domain" in your
>> fuego-ro/conf/fuego.conf
>> file to the following (which is the original default value for a Fuego
>> installation):
>>
>> server_domain=fuegotest.org/cgi-bin
>>
>> I have added the boards humanshu_wks:rpi and pptlab:rpi to that server.
>> There was also a board for fuegohost:rpi, which looks like it may have
>> been
>> related to your lab. Can you let me know what's going on with the
>> humanshu_wks
>> host entry and board? Is that someone from your team?
>>
>> (If not, it could be time to roll out some security for the server.)
>>
>> Let me know when you have switched your configuration, and I will send
>> some test requests your way. Actually, I'll post a test request on
>> fuegotest.org
>> (for pptlab:rpi) to see if your host picks it up.
>>
>> Thanks. Sorry about this issue.
>> -- Tim
>>
>>
>> > -----Original Message-----
>> > From: Pooja Sanjay More <pooja.sm@pathpartnertech.com>
>> >
>> > Hi Tim,
>> >
>> > Jenkins job has been added to schedule a poll request to run it for 12
>> hrs on a daily basis and 15 minutes wait time is given. Previously
>> > rpireboot.py was failing through jenkins job because of permission
>> issues. Now jenkins is added to the dialout group so reboot is also
>> > working as jenkins job.
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > Thanks and regards,
>> > Pooja More
>> >
>> >
>> >
>> >
>> > This message contains confidential information and is intended only for
>> the individual(s) named. If you are not the intended recipient, you
>> > are notified that disclosing, copying, distributing or taking any
>> action in reliance on the contents of this mail and attached file/s is
>> strictly
>> > prohibited. Please notify the sender immediately and delete this e-mail
>> from your system. E-mail transmission cannot be guaranteed to be
>> > secured or error-free as information could be intercepted, corrupted,
>> lost, destroyed, arrive late or incomplete, or contain viruses. The
>> > sender therefore does not accept liability for any errors or omissions
>> in the contents of this message, which arise as a result of e-mail
>> > transmission.
>>
>>
--
This
message contains confidential information and is intended only
for the
individual(s) named. If you are not the intended
recipient, you are
notified that disclosing, copying, distributing or taking any
action in
reliance on the contents of this mail and attached file/s is strictly
prohibited. Please notify the
sender immediately and delete this e-mail
from your system. E-mail transmission
cannot be guaranteed to be secured or
error-free as information could be
intercepted, corrupted, lost, destroyed,
arrive late or incomplete, or contain
viruses. The sender therefore does
not accept liability for any errors or
omissions in the contents of this
message, which arise as a result of e-mail
transmission.
[-- Attachment #2: Type: text/html, Size: 8174 bytes --]
next prev parent reply other threads:[~2020-12-21 13:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-16 3:29 [Fuego] Please switch server to fuegotest.org (was RE: poll request scheduling) Bird, Tim
2020-12-16 3:59 ` Srivatsan S
2020-12-16 15:46 ` Pooja Sanjay More
2020-12-21 13:13 ` Pooja Sanjay More [this message]
2020-12-22 23:32 ` Tim.Bird
2020-12-24 14:44 ` Pooja Sanjay More
2021-01-04 22:32 ` Tim.Bird
2021-01-06 7:08 ` Pooja Sanjay More
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAO08rzsY4fGS+AjgZizm12CVaSMRf47sgRF5UGHqj9w6psBLDw@mail.gmail.com \
--to=pooja.sm@pathpartnertech.com \
--cc=Tim.Bird@sony.com \
--cc=fuego@lists.linuxfoundation.org \
--cc=tbird20d@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.