From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alex Kiernan Date: Tue, 13 Feb 2018 09:52:39 +0000 Subject: [U-Boot] [PATCH 4/8] Convert CONFIG_BOOTCOUNT_ENV to Kconfig In-Reply-To: <20180213103007.6caba35b@jawa> References: <1518350813-3418-1-git-send-email-alex.kiernan@gmail.com> <1518350813-3418-5-git-send-email-alex.kiernan@gmail.com> <20180213103007.6caba35b@jawa> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Feb 13, 2018 at 9:30 AM, Lukasz Majewski wrote: > Hi Alex, > >> - Bootcount: >> - CONFIG_BOOTCOUNT_ENV >> - If no softreset save registers are found on the >> hardware >> - "bootcount" is stored in the environment. To prevent >> a >> - saveenv on all reboots, the environment variable >> - "upgrade_available" is used. If "upgrade_available" >> is >> - 0, "bootcount" is always 0, if "upgrade_available" is >> - 1 "bootcount" is incremented in the environment. >> - So the Userspace Applikation must set the >> "upgrade_available" >> - and "bootcount" variable to 0, if a boot was >> successfully. - >> -- Pre-Boot Commands: > ^^^^^^^^^^^ - This line shall be keep. The "- Bootcount:" Above > shall be deleted instead. > Ooh, good spot! -- Alex Kiernan