From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pekka Enberg Subject: Re: [PATCH 23/28] kvm tools: Endian-sanitise pci.h and PCI device setup Date: Tue, 6 Dec 2011 13:41:56 +0200 Message-ID: References: <4EDD8F16.6060104@ozlabs.org> <20111206102856.GB29781@moon> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: Matt Evans , kvm@vger.kernel.org, kvm-ppc@vger.kernel.org, Asias He , Sasha Levin , Ingo Molnar To: Cyrill Gorcunov Return-path: In-Reply-To: <20111206102856.GB29781@moon> Sender: kvm-ppc-owner@vger.kernel.org List-Id: kvm.vger.kernel.org On Tue, Dec 6, 2011 at 12:28 PM, Cyrill Gorcunov w= rote: > On Tue, Dec 06, 2011 at 12:25:29PM +0200, Pekka Enberg wrote: >> On Tue, Dec 6, 2011 at 5:42 AM, Matt Evans wrote: >> > vesa, pci-shmem and virtio-pci devices need to set up config space= with >> > little-endian conversions (as config space is LE). =A0The pci_conf= ig_address >> > bitfield also needs to be reversed when building on BE systems. >> > >> > Signed-off-by: Matt Evans >> >> Looks OK to me. Sasha, Cyrill? >> > > BIOS part looks pretty good to me. LE/BE part as well. Thanks Matt! Hmm. This seems to break "make check" for me: =2E/kvm run -d tests/boot/boot_test.iso -p "init=3Dinit" # kvm run -k ../../arch/x86/boot/bzImage -m 448 -c 4 --name guest-284= 5 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-rc3 (penberg@tux) (gcc version 4.6.0 20110603 (Red Hat 4.6.0-10) (GCC) ) #67 SMP Thu Nov 24 11:05:24 EET 2011 [ 0.000000] Command line: noapic noacpi pci=3Dconf1 reboot=3Dk panic= =3D1 i8042.direct=3D1 i8042.dumbkbd=3D1 i8042.nopnp=3D1 console=3DttyS0 earlyprintk=3Dserial i8042.noaux=3D1 init=3Dinit root=3D/dev/vda rw [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserve= d) [ 0.000000] BIOS-e820: 00000000000f0000 - 00000000000fffff (reserve= d) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001c000000 (usable) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn =3D 0x1c000 max_arch_pfn =3D 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x70106, new 0x7010600070106 [ 0.000000] CPU MTRRs all blank - virtualized system. [ 0.000000] found SMP MP-table at [ffff8800000f0390] f0390 [ 0.000000] init_memory_mapping: 0000000000000000-000000001c000000 [ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroo= t-219) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000001c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000001c000000 [ 0.000000] NODE_DATA [000000001bfec000 - 000000001bffffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1b71301, boot clock [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001c000 [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmwa= re.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: KVMCPU00 [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] IOAPIC[0]: apic_id 5, version 17, address 0xfec00000, GS= I 0-23 [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000= 0000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000= 0000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000= 0000ff000 [ 0.000000] PM: Registered nosave memory: 00000000000ff000 - 0000000= 000100000 [ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e4000000) [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001bc00000 s77888 r8192 d24512 u524288 [ 0.000000] kvm-clock: cpu 0, msr 0:1bc12301, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1bc0d000 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 112778 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: noapic noacpi pci=3Dconf1 reboot=3D= k panic=3D1 i8042.direct=3D1 i8042.dumbkbd=3D1 i8042.nopnp=3D1 console=3D= ttyS0 earlyprintk=3Dserial i8042.noaux=3D1 init=3Dinit root=3D/dev/vda rw [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 435408k/458752k available (4752k kernel code, 452k absent, 22892k reserved, 6886k data, 908k init) [ 0.000000] SLUB: Genslabs=3D15, HWalign=3D64, Order=3D0-3, MinObjec= ts=3D0, CPUs=3D4, Nodes=3D1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour *CGA 80x25 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=3Dmemory' option if you don't want memory cgroups [ 0.000000] Detected 2691.682 MHz processor. [ 0.000999] Calibrating delay loop (skipped) preset value.. 5383.36 BogoMIPS (lpj=3D2691682) [ 0.002009] pid_max: default: 32768 minimum: 301 [ 0.002722] Security Framework initialized [ 0.003146] Dentry cache hash table entries: 65536 (order: 7, 524288= bytes) [ 0.005202] Inode-cache hash table entries: 32768 (order: 6, 262144 = bytes) [ 0.006221] Mount-cache hash table entries: 256 [ 0.007267] Initializing cgroup subsys cpuacct [ 0.007810] Initializing cgroup subsys memory [ 0.008042] Initializing cgroup subsys devices [ 0.008591] Initializing cgroup subsys freezer [ 0.009003] Initializing cgroup subsys net_cls [ 0.009452] Initializing cgroup subsys blkio [ 0.010015] Initializing cgroup subsys perf_event [ 0.010554] CPU: Physical Processor ID: 0 [ 0.011002] CPU: Processor Core ID: 0 [ 0.011390] mce: CPU supports 32 MCE banks [ 0.013371] ftrace: allocating 24096 entries in 95 pages [ 0.016161] CPU0: Intel 06/2a stepping 07 [ 0.118022] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.119085] NMI watchdog disabled (cpu0): hardware events not enable= d [ 0.119886] Booting Node 0, Processors #1 [ 0.132990] kvm-clock: cpu 1, msr 0:1bc92301, secondary cpu clock [ 0.133013] NMI watchdog disabled (cpu1): hardware events not enable= d [ 0.133155] #2 [ 0.133035] KVM setup async PF for cpu 1 [ 0.133035] kvm-stealtime: cpu 1, msr 1bc8d000 [ 0.146998] kvm-clock: cpu 2, msr 0:1bd12301, secondary cpu clock [ 0.147018] NMI watchdog disabled (cpu2): hardware events not enable= d [ 0.147158] #3 Ok. [ 0.147042] KVM setup async PF for cpu 2 [ 0.147042] kvm-stealtime: cpu 2, msr 1bd0d000 [ 0.159987] kvm-clock: cpu 3, msr 0:1bd92301, secondary cpu clock [ 0.160018] NMI watchdog disabled (cpu3): hardware events not enable= d [ 0.160052] Brought up 4 CPUs [ 0.160054] Total of 4 processors activated (21533.45 BogoMIPS). [ 0.160050] KVM setup async PF for cpu 3 [ 0.160050] kvm-stealtime: cpu 3, msr 1bd8d000 [ 0.166066] devtmpfs: initialized [ 0.169332] atomic64 test passed for x86-64 platform with CX8 and wi= th SSE [ 0.170095] RTC time: 11:40:38, date: 12/06/11 [ 0.170631] NET: Registered protocol family 16 [ 0.173092] PCI: Using configuration type 1 for base access [ 0.175422] bio: create slab at 0 [ 0.176087] ACPI: Interpreter disabled. [ 0.177069] vgaarb: loaded [ 0.177585] SCSI subsystem initialized [ 0.178077] usbcore: registered new interface driver usbfs [ 0.179013] usbcore: registered new interface driver hub [ 0.180077] usbcore: registered new device driver usb [ 0.181129] PCI: Probing PCI hardware [ 0.182273] NetLabel: Initializing [ 0.182984] NetLabel: domain hash size =3D 128 [ 0.183675] NetLabel: protocols =3D UNLABELED CIPSOv4 [ 0.183994] NetLabel: unlabeled traffic allowed by default [ 0.184986] Switching to clocksource kvm-clock [ 0.193502] pnp: PnP ACPI: disabled [ 0.201702] NET: Registered protocol family 2 [ 0.202465] IP route cache hash table entries: 4096 (order: 3, 32768= bytes) [ 0.203701] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.204975] TCP bind hash table entries: 16384 (order: 6, 262144 byt= es) [ 0.206334] TCP: Hash tables configured (established 16384 bind 1638= 4) [ 0.207420] TCP reno registered [ 0.207919] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.208865] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.209934] NET: Registered protocol family 1 [ 0.210904] kvm: no hardware support [ 0.211689] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.217236] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni= ) [ 0.218979] audit: initializing netlink socket (disabled) [ 0.220207] type=3D2000 audit(1323171638.219:1): initialized [ 0.237755] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.240695] VFS: Disk quotas dquot_6.5.2 [ 0.241409] Dquot-cache hash table entries: 512 (order 0, 4096 bytes= ) [ 0.242980] Installing v9fs 9p2000 file system support [ 0.243865] msgmni has been set to 850 [ 0.245846] alg: No test for stdrng (krng) [ 0.246747] NET: Registered protocol family 38 [ 0.247489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.248841] io scheduler noop registered [ 0.249551] io scheduler deadline registered [ 0.250295] io scheduler cfq registered (default) [ 0.251156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.252108] pciehp: PCI Express Hot Plug Controller Driver version: = 0.4 [ 0.253206] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.= 5 [ 0.254505] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.276481] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 0.306891] serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A [ 0.333156] serial8250: ttyS2 at I/O 0x3e8 (irq =3D 4) is a 16550A [ 0.334767] Non-volatile memory driver v1.3 [ 0.335276] Linux agpgart interface v0.103 [ 0.338190] brd: module loaded [ 0.339946] loop: module loaded [ 0.340440] Fixed MDIO Bus: probed [ 0.340946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driv= er [ 0.341698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.342413] uhci_hcd: USB Universal Host Controller Interface driver [ 0.343194] usbcore: registered new interface driver usbserial [ 0.343840] USB Serial support registered for generic [ 0.344436] usbcore: registered new interface driver usbserial_gener= ic [ 0.345170] usbserial: USB Serial Driver core [ 0.345649] i8042: PNP detection disabled [ 0.346277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.347061] mousedev: PS/2 mouse device common for all mice [ 0.348078] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.349770] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.350818] rtc_cmos rtc_cmos: only 24-hr supported [ 0.351831] device-mapper: uevent: version 1.0.3 [ 0.352788] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.354096] cpuidle: using governor ladder [ 0.354554] cpuidle: using governor menu [ 0.354982] EFI Variables Facility v0.08 2004-May-17 [ 0.355676] usbcore: registered new interface driver usbhid [ 0.356297] usbhid: USB HID core driver [ 0.356748] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.357344] TCP cubic registered [ 0.357705] NET: Registered protocol family 17 [ 0.358214] Installing 9P2000 support [ 0.358627] Registering the dns_resolver key type [ 0.359358] registered taskstats version 1 [ 0.359824] IMA: No TPM chip found, activating TPM-bypass! [ 0.360677] Magic number: 7:784:680 [ 0.361129] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.361841] Initializing network drop monitor service [ 0.362933] md: Waiting for all devices to be available before autod= etect [ 0.363691] md: If you don't use raid, use raid=3Dnoautodetect [ 0.364537] md: Autodetecting RAID arrays. [ 0.364997] md: Scanned 0 and added 0 devices. [ 0.365502] md: autorun ... [ 0.365809] md: ... autorun DONE. [ 0.366234] VFS: Cannot open root device "vda" or unknown-block(0,0) [ 0.367056] Please append a correct "root=3D" boot option; here are the available partitions: [ 0.368484] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.369907] Pid: 1, comm: swapper Not tainted 3.2.0-rc3 #67 [ 0.370644] Call Trace: [ 0.370922] [] panic+0x91/0x1a5 [ 0.371450] [] mount_block_root+0x250/0x27b [ 0.372107] [] mount_root+0x53/0x57 [ 0.372662] [] prepare_namespace+0x16d/0x1a6 [ 0.373312] [] ? release_tgcred+0x2f/0x2f [ 0.373923] [] kernel_init+0x153/0x158 [ 0.374527] [] ? schedule_tail+0x27/0x6c [ 0.375147] [] kernel_thread_helper+0x4/0x10 [ 0.375785] [] ? start_kernel+0x3bd/0x3bd [ 0.376408] [] ? gs_change+0x13/0x13 [ 0.377064] Rebooting in 1 seconds.. *** Compatibility Warning *** virtio-blk device was not detected While you have requested a virtio-blk device, the guest kernel did not initialize it. Please make sure that the guest kernel was compiled with CONFIG_VIRTIO_BLK=3Dy enabled in its .config # KVM session ended normally. From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pekka Enberg Date: Tue, 06 Dec 2011 11:41:56 +0000 Subject: Re: [PATCH 23/28] kvm tools: Endian-sanitise pci.h and PCI device setup Message-Id: List-Id: References: <4EDD8F16.6060104@ozlabs.org> <20111206102856.GB29781@moon> In-Reply-To: <20111206102856.GB29781@moon> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: Cyrill Gorcunov Cc: Matt Evans , kvm@vger.kernel.org, kvm-ppc@vger.kernel.org, Asias He , Sasha Levin , Ingo Molnar On Tue, Dec 6, 2011 at 12:28 PM, Cyrill Gorcunov wrote: > On Tue, Dec 06, 2011 at 12:25:29PM +0200, Pekka Enberg wrote: >> On Tue, Dec 6, 2011 at 5:42 AM, Matt Evans wrote: >> > vesa, pci-shmem and virtio-pci devices need to set up config space with >> > little-endian conversions (as config space is LE). =A0The pci_config_a= ddress >> > bitfield also needs to be reversed when building on BE systems. >> > >> > Signed-off-by: Matt Evans >> >> Looks OK to me. Sasha, Cyrill? >> > > BIOS part looks pretty good to me. LE/BE part as well. Thanks Matt! Hmm. This seems to break "make check" for me: ./kvm run -d tests/boot/boot_test.iso -p "init=3Dinit" # kvm run -k ../../arch/x86/boot/bzImage -m 448 -c 4 --name guest-2845 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-rc3 (penberg@tux) (gcc version 4.6.0 20110603 (Red Hat 4.6.0-10) (GCC) ) #67 SMP Thu Nov 24 11:05:24 EET 2011 [ 0.000000] Command line: noapic noacpi pci=3Dconf1 reboot=3Dk panic=3D1 i8042.direct=3D1 i8042.dumbkbd=3D1 i8042.nopnp=3D1 console=3DttyS0 earlyprintk=3Dserial i8042.noaux=3D1 init=3Dinit root=3D/dev/vda rw [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 00000000000fffff (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001c000000 (usable) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn =3D 0x1c000 max_arch_pfn =3D 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x70106, new 0x7010600070106 [ 0.000000] CPU MTRRs all blank - virtualized system. [ 0.000000] found SMP MP-table at [ffff8800000f0390] f0390 [ 0.000000] init_memory_mapping: 0000000000000000-000000001c000000 [ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-21= 9) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000001c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000001c000000 [ 0.000000] NODE_DATA [000000001bfec000 - 000000001bffffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1b71301, boot clock [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001c000 [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.o= rg [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: KVMCPU00 [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] IOAPIC[0]: apic_id 5, version 17, address 0xfec00000, GSI 0-= 23 [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 00000000000= ff000 [ 0.000000] PM: Registered nosave memory: 00000000000ff000 - 00000000001= 00000 [ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e4000000) [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001bc00000 s77888 r8192 d24512 u524288 [ 0.000000] kvm-clock: cpu 0, msr 0:1bc12301, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1bc0d000 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 112778 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: noapic noacpi pci=3Dconf1 reboot=3Dk panic=3D1 i8042.direct=3D1 i8042.dumbkbd=3D1 i8042.nopnp=3D1 console=3DttyS0 earlyprintk=3Dserial i8042.noaux=3D1 init=3Dinit root=3D/dev/vda rw [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 435408k/458752k available (4752k kernel code, 452k absent, 22892k reserved, 6886k data, 908k init) [ 0.000000] SLUB: Genslabs=15, HWalignd, Order=3D0-3, MinObjects=3D0, CPUs=3D4, Nodes=3D1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour *CGA 80x25 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=3Dmemory' option if you don't want memory cgroups [ 0.000000] Detected 2691.682 MHz processor. [ 0.000999] Calibrating delay loop (skipped) preset value.. 5383.36 BogoMIPS (lpj&91682) [ 0.002009] pid_max: default: 32768 minimum: 301 [ 0.002722] Security Framework initialized [ 0.003146] Dentry cache hash table entries: 65536 (order: 7, 524288 byt= es) [ 0.005202] Inode-cache hash table entries: 32768 (order: 6, 262144 byte= s) [ 0.006221] Mount-cache hash table entries: 256 [ 0.007267] Initializing cgroup subsys cpuacct [ 0.007810] Initializing cgroup subsys memory [ 0.008042] Initializing cgroup subsys devices [ 0.008591] Initializing cgroup subsys freezer [ 0.009003] Initializing cgroup subsys net_cls [ 0.009452] Initializing cgroup subsys blkio [ 0.010015] Initializing cgroup subsys perf_event [ 0.010554] CPU: Physical Processor ID: 0 [ 0.011002] CPU: Processor Core ID: 0 [ 0.011390] mce: CPU supports 32 MCE banks [ 0.013371] ftrace: allocating 24096 entries in 95 pages [ 0.016161] CPU0: Intel 06/2a stepping 07 [ 0.118022] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.119085] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.119886] Booting Node 0, Processors #1 [ 0.132990] kvm-clock: cpu 1, msr 0:1bc92301, secondary cpu clock [ 0.133013] NMI watchdog disabled (cpu1): hardware events not enabled [ 0.133155] #2 [ 0.133035] KVM setup async PF for cpu 1 [ 0.133035] kvm-stealtime: cpu 1, msr 1bc8d000 [ 0.146998] kvm-clock: cpu 2, msr 0:1bd12301, secondary cpu clock [ 0.147018] NMI watchdog disabled (cpu2): hardware events not enabled [ 0.147158] #3 Ok. [ 0.147042] KVM setup async PF for cpu 2 [ 0.147042] kvm-stealtime: cpu 2, msr 1bd0d000 [ 0.159987] kvm-clock: cpu 3, msr 0:1bd92301, secondary cpu clock [ 0.160018] NMI watchdog disabled (cpu3): hardware events not enabled [ 0.160052] Brought up 4 CPUs [ 0.160054] Total of 4 processors activated (21533.45 BogoMIPS). [ 0.160050] KVM setup async PF for cpu 3 [ 0.160050] kvm-stealtime: cpu 3, msr 1bd8d000 [ 0.166066] devtmpfs: initialized [ 0.169332] atomic64 test passed for x86-64 platform with CX8 and with S= SE [ 0.170095] RTC time: 11:40:38, date: 12/06/11 [ 0.170631] NET: Registered protocol family 16 [ 0.173092] PCI: Using configuration type 1 for base access [ 0.175422] bio: create slab at 0 [ 0.176087] ACPI: Interpreter disabled. [ 0.177069] vgaarb: loaded [ 0.177585] SCSI subsystem initialized [ 0.178077] usbcore: registered new interface driver usbfs [ 0.179013] usbcore: registered new interface driver hub [ 0.180077] usbcore: registered new device driver usb [ 0.181129] PCI: Probing PCI hardware [ 0.182273] NetLabel: Initializing [ 0.182984] NetLabel: domain hash size =3D 128 [ 0.183675] NetLabel: protocols =3D UNLABELED CIPSOv4 [ 0.183994] NetLabel: unlabeled traffic allowed by default [ 0.184986] Switching to clocksource kvm-clock [ 0.193502] pnp: PnP ACPI: disabled [ 0.201702] NET: Registered protocol family 2 [ 0.202465] IP route cache hash table entries: 4096 (order: 3, 32768 byt= es) [ 0.203701] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.204975] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.206334] TCP: Hash tables configured (established 16384 bind 16384) [ 0.207420] TCP reno registered [ 0.207919] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.208865] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.209934] NET: Registered protocol family 1 [ 0.210904] kvm: no hardware support [ 0.211689] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.217236] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.218979] audit: initializing netlink socket (disabled) [ 0.220207] type 00 audit(1323171638.219:1): initialized [ 0.237755] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.240695] VFS: Disk quotas dquot_6.5.2 [ 0.241409] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.242980] Installing v9fs 9p2000 file system support [ 0.243865] msgmni has been set to 850 [ 0.245846] alg: No test for stdrng (krng) [ 0.246747] NET: Registered protocol family 38 [ 0.247489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.248841] io scheduler noop registered [ 0.249551] io scheduler deadline registered [ 0.250295] io scheduler cfq registered (default) [ 0.251156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.252108] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.253206] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.254505] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.276481] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 0.306891] serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A [ 0.333156] serial8250: ttyS2 at I/O 0x3e8 (irq =3D 4) is a 16550A [ 0.334767] Non-volatile memory driver v1.3 [ 0.335276] Linux agpgart interface v0.103 [ 0.338190] brd: module loaded [ 0.339946] loop: module loaded [ 0.340440] Fixed MDIO Bus: probed [ 0.340946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.341698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.342413] uhci_hcd: USB Universal Host Controller Interface driver [ 0.343194] usbcore: registered new interface driver usbserial [ 0.343840] USB Serial support registered for generic [ 0.344436] usbcore: registered new interface driver usbserial_generic [ 0.345170] usbserial: USB Serial Driver core [ 0.345649] i8042: PNP detection disabled [ 0.346277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.347061] mousedev: PS/2 mouse device common for all mice [ 0.348078] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.349770] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.350818] rtc_cmos rtc_cmos: only 24-hr supported [ 0.351831] device-mapper: uevent: version 1.0.3 [ 0.352788] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.354096] cpuidle: using governor ladder [ 0.354554] cpuidle: using governor menu [ 0.354982] EFI Variables Facility v0.08 2004-May-17 [ 0.355676] usbcore: registered new interface driver usbhid [ 0.356297] usbhid: USB HID core driver [ 0.356748] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.357344] TCP cubic registered [ 0.357705] NET: Registered protocol family 17 [ 0.358214] Installing 9P2000 support [ 0.358627] Registering the dns_resolver key type [ 0.359358] registered taskstats version 1 [ 0.359824] IMA: No TPM chip found, activating TPM-bypass! [ 0.360677] Magic number: 7:784:680 [ 0.361129] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.361841] Initializing network drop monitor service [ 0.362933] md: Waiting for all devices to be available before autodetect [ 0.363691] md: If you don't use raid, use raid=3Dnoautodetect [ 0.364537] md: Autodetecting RAID arrays. [ 0.364997] md: Scanned 0 and added 0 devices. [ 0.365502] md: autorun ... [ 0.365809] md: ... autorun DONE. [ 0.366234] VFS: Cannot open root device "vda" or unknown-block(0,0) [ 0.367056] Please append a correct "root=3D" boot option; here are the available partitions: [ 0.368484] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.369907] Pid: 1, comm: swapper Not tainted 3.2.0-rc3 #67 [ 0.370644] Call Trace: [ 0.370922] [] panic+0x91/0x1a5 [ 0.371450] [] mount_block_root+0x250/0x27b [ 0.372107] [] mount_root+0x53/0x57 [ 0.372662] [] prepare_namespace+0x16d/0x1a6 [ 0.373312] [] ? release_tgcred+0x2f/0x2f [ 0.373923] [] kernel_init+0x153/0x158 [ 0.374527] [] ? schedule_tail+0x27/0x6c [ 0.375147] [] kernel_thread_helper+0x4/0x10 [ 0.375785] [] ? start_kernel+0x3bd/0x3bd [ 0.376408] [] ? gs_change+0x13/0x13 [ 0.377064] Rebooting in 1 seconds.. *** Compatibility Warning *** virtio-blk device was not detected While you have requested a virtio-blk device, the guest kernel did not initialize it. Please make sure that the guest kernel was compiled with CONFIG_VIRTIO_BLK=3Dy enabled in its .config # KVM session ended normally.