From: Antoine Durand <wanipof@gmail.com>
To: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Jan Kiszka <jan.kiszka@siemens.com>, xenomai@xenomai.org
Subject: Re: [Xenomai] I-Pipe Tracer and linux ftrace
Date: Tue, 23 Jun 2015 18:18:05 +0200 [thread overview]
Message-ID: <CAOL1OyOdg9S=G412PAsiJCkaSii9Pgu17a_0=gOHaOyr=fHaDQ@mail.gmail.com> (raw)
In-Reply-To: <20150623160736.GL17436@csclub.uwaterloo.ca>
booting with 'maxcpus=2' in my case has the same behavior than
CONFIG_NR_CPUS=2
the clocksource switche to refined-jiffies and system time is wrong (very
very slow)
I only get
refined-jiffies jiffies and tsc
in /sys/devices/system/clocksource/clocksource0/available_clocksource
the 8254 isn't seen.
2015-06-23 18:07 GMT+02:00 Lennart Sorensen <lsorense@csclub.uwaterloo.ca>:
> On Tue, Jun 23, 2015 at 04:41:06PM +0200, Antoine Durand wrote:
> > The clocksource switching is due to the config option
> >
> > CONFIG_NR_CPUS=2
> >
> > the CPU is quad core and i would like to use only two of them to emulate
> a
> > cheaper board.
> >
> > now the time run normally
> >
> > i will check if the other problems are resolved.
>
> Wouldn't booting with 'maxcpus=2' be good enough for that test and avoid
> any breaking of the system?
>
> --
> Len Sorensen
>
next prev parent reply other threads:[~2015-06-23 16:18 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-22 16:06 [Xenomai] I-Pipe Tracer and linux ftrace Antoine Durand
2015-06-22 17:20 ` Jan Kiszka
2015-06-22 20:47 ` Antoine Durand
2015-06-23 6:19 ` Jan Kiszka
2015-06-23 10:09 ` Antoine Durand
2015-06-23 14:11 ` Lennart Sorensen
2015-06-23 14:15 ` Jan Kiszka
2015-06-23 14:27 ` Gilles Chanteperdrix
2015-06-23 14:41 ` Antoine Durand
2015-06-23 14:43 ` Jan Kiszka
2015-06-23 14:46 ` Gilles Chanteperdrix
2015-06-23 14:47 ` Antoine Durand
2015-06-23 14:49 ` Gilles Chanteperdrix
2015-06-23 14:59 ` Jan Kiszka
2015-06-23 15:01 ` Antoine Durand
2015-06-23 16:07 ` Lennart Sorensen
2015-06-23 16:18 ` Antoine Durand [this message]
2015-06-23 17:00 ` Jan Kiszka
2015-06-23 17:23 ` Jan Kiszka
2015-06-24 7:30 ` Antoine Durand
[not found] ` <CAOL1OyNELX_6g8fOSS8wuJ+6-TzrBXjoxn3wH-Gb8u-HKHFqSw@mail.gmail.com>
2015-06-23 14:42 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAOL1OyOdg9S=G412PAsiJCkaSii9Pgu17a_0=gOHaOyr=fHaDQ@mail.gmail.com' \
--to=wanipof@gmail.com \
--cc=jan.kiszka@siemens.com \
--cc=lsorense@csclub.uwaterloo.ca \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.