From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 11 Dec 2019 00:13:03 -0300
Subject: i.MX8MM-EVK Boot failure
In-Reply-To: <AM0PR04MB44818B2932C9671226C8E564885A0@AM0PR04MB4481.eurprd04.prod.outlook.com>
References: <CAHCN7xKx1G-RmP5QA3nHinSPi60ji1TOi08USydU=vXEWU4=8g@mail.gmail.com>
 <AM0PR04MB4481FB7026355C69EC06F58B885A0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5C6Lh654Otqt++Ekc-Y-JzWjnzTPDwFcQxw5UFS-Yx10w@mail.gmail.com>
 <AM0PR04MB44818B2932C9671226C8E564885A0@AM0PR04MB4481.eurprd04.prod.outlook.com>
Message-ID: <CAOMZO5AKwQKXCBYZS7chpmZL9XEgPV6KrRe-kiOs3TXR60Wb-g@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Peng,

On Wed, Dec 11, 2019 at 12:05 AM Peng Fan <peng.fan@nxp.com> wrote:

> > Does it work if you follow the README steps?
>
> I not download that, just use my local ATF/DDR,

Yes, this is what I suspected: the ATF/DDR firmware versions from the
README are not working with mainline U-Boot.

Could you please update the README to point to the correct versions, please?

Otherwise nobody will be able to run U-Boot mainline on i.MX8MM/i.MX8MQ.

Thanks