From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 16 Jan 2020 19:38:39 -0300
Subject: question: mx7ulp - LDO_ENABLED_MODE
In-Reply-To: <20200116222421.GB20815@trex>
References: <20200116203000.GA21781@trex>
 <CAOMZO5CREf4SbdHR_ReBtp2eKNUxKS-JkQBiezwyF4ooATK-iA@mail.gmail.com>
 <CAOMZO5BD7R+6J_rjfOnc+MvSz=M31mH05W1WovZVcjSeibnEmA@mail.gmail.com>
 <CAOMZO5B_bJuSOUwSxZcNHreyvBV0QXsVvmst=wg+mbK-NZK5Pw@mail.gmail.com>
 <20200116222421.GB20815@trex>
Message-ID: <CAOMZO5AMC6V1_QAB44d+68HbX-z7KFdDZEgAE3DY0q0BaHLQtA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thu, Jan 16, 2020 at 7:24 PM Jorge Ramirez-Ortiz, Gmail
<jorge.ramirez.ortiz@gmail.com> wrote:

> um still nothing.
> will debug more in the morning - will add more debug info.
> thanks for the quick responses!

Ok, just tested mainline U-Boot (without any changes) on my i.MX7ULP boards.

On mx7ulp_evk I see:

PMC1:  LDO bypass mode

and on mx7ul_com board I see:

PMC1:  LDO enabled mode

The code I did to set and check LDO enabled is according to the RM and
it seems to behave properly on these two boards.

Let me know if you make any progress.

Fabio Estevam