From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Mon, 20 May 2019 11:07:12 -0300
Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
In-Reply-To: <20190517145750.1973dc4c@jawa>
References: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
 <AM0PR04MB448175571BDD7A4C3B7EE7B7880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5BwP-axMc0dRYCCPVrPgdEF6ms4Fb3a8GTyqZSo2W+d8Q@mail.gmail.com>
 <AM0PR04MB4481C2009FD8937695086EC0880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5BMzNvoQU89jmxBK-Kot1ofd=98VkuXD8yApj6+efubtA@mail.gmail.com>
 <20190517145750.1973dc4c@jawa>
Message-ID: <CAOMZO5An=XbZki_FTjsEir4WLfDMBH6uy5zFKQiRLs+0j99sLQ@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Lukasz,

On Fri, May 17, 2019 at 9:58 AM Lukasz Majewski <lukma@denx.de> wrote:

> I had similar issue on imx53 (hsc). The problem was with not properly
> set GPIO pin by DM/DTS in SPL. The GPIO was responsible for eMMC card
> detect, so the SPL code after checking this got the impression that the
> card is missing -> hence the -19 error.
>
> Interesting commit: SHA1: 7a0425dd969c44e6afb6936bf8205c8770e9dea9

I have also tried passing  the 'non-removable' property and still get
the -19 error.