From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 6 Sep 2018 10:28:24 -0300
Subject: [U-Boot] [PULL] Please pull u-boot-imx
In-Reply-To: <CALeDE9P1XodgqjGv8Sp8FtJaajUJaTnDQAAHKJxKwN701tzbCg@mail.gmail.com>
References: <9d19bc5e-b7aa-d7e3-8eeb-b211360edca0@denx.de>
 <CALeDE9OF-Jzwh6S7GuuL1gVyKj=2NifSJLFA0_P7V-f6s-a1Nw@mail.gmail.com>
 <ff309842-5d2c-f5c2-ab12-026fcfade4e5@denx.de>
 <CALeDE9P1XodgqjGv8Sp8FtJaajUJaTnDQAAHKJxKwN701tzbCg@mail.gmail.com>
Message-ID: <CAOMZO5AsgbVKfNVaZbNHbLj=zP+RLJ_7L3agKoQmnYbjSEv-8A@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Peter,

[Adding Jon and Baruch]

On Thu, Sep 6, 2018 at 9:37 AM, Peter Robinson <pbrobinson@gmail.com> wrote:

> It seems like the Wandboard Quad revB I have also works fine so It
> might just be a regression in the mx6cuboxi target.

I don't have access to a hummingboard2 to investigate it.

Does this issue also happen on a mx6q cuboxi?

Are you able to run a bisect?

Thanks