All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 00/33] ARM: i.MX6: SabreSD: Add dts support
Date: Thu, 11 May 2017 14:12:39 -0300	[thread overview]
Message-ID: <CAOMZO5BQK0PQQFOXZ3xYWg-rUoSxrp5jSB7vcUBv+DURVqSUcQ@mail.gmail.com> (raw)
In-Reply-To: <CAOMZO5C35VMx+4L=QvSk5zKrC7Wn728VfWjyYBOdeRJMiAMJwA@mail.gmail.com>

HI Jagan,

On Thu, May 4, 2017 at 7:10 PM, Fabio Estevam <festevam@gmail.com> wrote:

> I will test your series probably next week.

I tested your series from
http://git.denx.de/?p=u-boot-spi.git;a=shortlog;h=refs/heads/sabresd

and I can use the same SD card to boot mx6q and mx6qp sabresd boards,
so this is a nice improvement, thanks!

I will comment on the individual patches, but I prefer we keep the
existing defconfig names that we have been using for a long time.

For example:
To build non SPL target for mx6qsabresd:
make mx6qsabresd_defconfig

does not work anymore.

After your series is applied we need to do:

make imx6q_sabresd_defconfig

which will confuse users.

Same thing is valid for SPL, please keep the existing
mx6sabresd_spl_defconfig name.

  reply	other threads:[~2017-05-11 17:12 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-04 15:11 [U-Boot] [PATCH v5 00/33] ARM: i.MX6: SabreSD: Add dts support Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 01/33] mx6sabresd: README: Fix to add space on dd command Jagan Teki
2017-05-11 17:15   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 02/33] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-05-11 17:14   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 03/33] ARM: dts: imx6qdl-sabresd: Add imx6q-sabresd.dts Jagan Teki
2017-05-11 17:16   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 04/33] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-05-11 17:17   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 05/33] ARM: i.MX6Q: sabresd: Add initial devicetree support Jagan Teki
2017-05-11 17:18   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 06/33] ARM: dts: imx6qdl-sabresd: Add imx6qp-sabresd.dts Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 07/33] ARM: i.MX6QP: sabresd: Add initial devicetree support Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 08/33] ARM: i.MX6: sabresd: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-05-11 17:19   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 09/33] ARM: dts: imx6qdl-sabresd: Add I2C node's Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 10/33] ARM: dts: imx6qdl-sabresd: Add PMIC pfuze100 node Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 11/33] ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC Jagan Teki
2017-05-11 17:20   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 12/33] ARM: i.MX6: sabresd: defconfig move - CONFIG_USB_EHCI(_MX6) Jagan Teki
2017-05-11 17:21   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 13/33] ARM: dts: imx6qdl-sabresd: Add usb host node Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 14/33] ARM: dts: imx6qdl-sabresd: Add usb otg node Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 15/33] ARM: i.MX6: sabresd: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 16/33] ARM: i.MX6: sabresd: Enable DM_USB Jagan Teki
2017-05-11 17:21   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 17/33] ARM: dts: imx6qdl-sabresd: Add FEC node Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 18/33] ARM: i.MX6: sabre: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-05-11 17:22   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 19/33] ARM: i.MX6: sabresd: Enable DM_ETH Jagan Teki
2017-05-11 17:23   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 20/33] ARM: i.MX6: sabresd: Add dm_gpio_* for backlight Jagan Teki
2017-05-11 17:23   ` Fabio Estevam
2017-05-18  8:30     ` Jagan Teki
2017-05-18 10:38       ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 21/33] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_power Jagan Teki
2017-05-11 17:25   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 22/33] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_reset Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 23/33] ARM: dts: imx6qdl-sabresd: Add imx6dl-sabresd.dts Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 24/33] ARM: i.MX6: %s/mx6[dl|q]sabresd_defconfig/imx6[dl|q]_sabresd_defconfig Jagan Teki
2017-05-11 17:26   ` Fabio Estevam
2017-05-18  4:48     ` Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 25/33] ARM: i.MX6Q: sabresd: Add dts support for imx6q_sabresd Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 26/33] ARM: i.MX6DL: sabresd: Add dts support for imx6dl_sabresd Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 27/33] ARM: i.MX6: sabresd: Drop legacy non-fdt code Jagan Teki
2017-05-11 17:28   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 28/33] ARM: i.MX6: %s/mx6sabresd/imx6sabresd Jagan Teki
2017-05-11 17:30   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 29/33] ARM: i.MX6: %s/MX6SABRESD/IMX6SABRESD Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 30/33] ARM: i.MX6: sabresd: Move DM_* and OF_CONTROL to arch Kconfig Jagan Teki
2017-05-04 15:11 ` [U-Boot] [PATCH v5 31/33] ARM: i.MX6: sabresd: Drop checkboard Jagan Teki
2017-05-11 17:31   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 32/33] ARM: i.MX6: sabresd: Cleanup board code Jagan Teki
2017-05-11 17:32   ` Fabio Estevam
2017-05-04 15:11 ` [U-Boot] [PATCH v5 33/33] imx6sabresd: README: Update with dtb changes Jagan Teki
2017-05-04 22:10 ` [U-Boot] [PATCH v5 00/33] ARM: i.MX6: SabreSD: Add dts support Fabio Estevam
2017-05-11 17:12   ` Fabio Estevam [this message]
2017-05-12 23:09 ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAOMZO5BQK0PQQFOXZ3xYWg-rUoSxrp5jSB7vcUBv+DURVqSUcQ@mail.gmail.com \
    --to=festevam@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.