From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Tue, 26 Mar 2019 14:58:08 -0300
Subject: [U-Boot] [PATCH] pico-imx7: Disable video support
In-Reply-To: <CAOf5uwmt0yh-oFrctsTGEbjzULcySayMyEvWnupXX-kK9-vNtw@mail.gmail.com>
References: <20190323135307.29439-1-festevam@gmail.com>
 <CACr73kD4AMs+Rrr47-=F7d0-gmu-kn2=Xr=gREq0ZqCpRSbF7Q@mail.gmail.com>
 <CAOf5uwk+5vY3Ornn3YESafiSb5efS-x7jXQ-0Ckw5BUaEFZ=Gg@mail.gmail.com>
 <CAOMZO5BfbzJd1qkeRu5Y35BmefCzdzNF8Vzq4vvgUDLrd4tsiQ@mail.gmail.com>
 <CAOf5uw=A+hE3sxDpzHG_QfO=x636j0iPatvoQ0MhVoHpRXHxNg@mail.gmail.com>
 <CAOMZO5BNbapOu-fpKAwCFMMJiu+7refQRLa2wpR4uOcD=Pufaw@mail.gmail.com>
 <CAOf5uwk6xbPJy_nCJZT-RbdaqeFW3s6LKVBdXN1hK1zfi14hnQ@mail.gmail.com>
 <CAOMZO5Bn=xmvCYPO2bzRpOEZTEvwOmHNMdDL2e2evukUrZezpw@mail.gmail.com>
 <CAOf5uwm2sv_bKVcdoVRk6u-TrTe5MRPtOJBuy0E2Bf4A3rHHCQ@mail.gmail.com>
 <CAOMZO5C2-1WjaNkBWdEGzrqWB-3gLM_uzBaoOfBC83PWjBk+UA@mail.gmail.com>
 <CAOMZO5AxN9j63KjNee-4XeiwZpxOF+SuvBcx5r_VZkAPjnfUoQ@mail.gmail.com>
 <CAOf5uwmt0yh-oFrctsTGEbjzULcySayMyEvWnupXX-kK9-vNtw@mail.gmail.com>
Message-ID: <CAOMZO5BjXsDQAmwwcjo5auqETGoKRe+YSCVKb44yPHED-EP=ug@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Michael,

On Tue, Mar 26, 2019 at 5:21 AM Michael Nazzareno Trimarchi
<michael@amarulasolutions.com> wrote:

> > Not sure why setting GPIO1_6 is causing the board to hang.
>
> Maybe you drain to much power ;)

Yes, that was the issue. This issue can be avoided by powering the
board via an externally powered USB hub.

The new baseboard revision B1 seems to drain less power and the issue
does not happen there.

Let's discard this patch then and leave the LCD support as is.

Thanks