From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Fri, 13 Dec 2019 06:44:43 -0300
Subject: i.MX8MM-EVK Boot failure
In-Reply-To: <CAHYQr0oZVmvNSWq5ojtXLWqf=OvZVMVvZ0VEhwFCobfAtxa=wg@mail.gmail.com>
References: <CAHCN7xKx1G-RmP5QA3nHinSPi60ji1TOi08USydU=vXEWU4=8g@mail.gmail.com>
 <AM0PR04MB4481FB7026355C69EC06F58B885A0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5C6Lh654Otqt++Ekc-Y-JzWjnzTPDwFcQxw5UFS-Yx10w@mail.gmail.com>
 <AM0PR04MB44818B2932C9671226C8E564885A0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAHYQr0oZVmvNSWq5ojtXLWqf=OvZVMVvZ0VEhwFCobfAtxa=wg@mail.gmail.com>
Message-ID: <CAOMZO5Bu66dM0SY4=SLhWoPOVFLwi6i55n+QGfbwOwq=XbXtkA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Ricardo,

On Thu, Dec 12, 2019 at 6:20 PM Ricardo Salveti <rsalveti@rsalveti.net> wrote:

> Can you also confirm if mmc is working correctly on imx8mm evk?

I don't have access to a imx8mm_evk at the moment, but does the change
below help?

--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -66,7 +66,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_DM_ETH=y