From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 23 May 2019 10:49:11 -0300
Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
In-Reply-To: <AM0PR04MB4481B9A748A56F1D71DC2D1488000@AM0PR04MB4481.eurprd04.prod.outlook.com>
References: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
 <AM0PR04MB448175571BDD7A4C3B7EE7B7880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5BwP-axMc0dRYCCPVrPgdEF6ms4Fb3a8GTyqZSo2W+d8Q@mail.gmail.com>
 <AM0PR04MB4481C2009FD8937695086EC0880B0@AM0PR04MB4481.eurprd04.prod.outlook.com>
 <CAOMZO5BZj7DxqfVSdFvZbPZ=AYzxRF+dsqbZW77m3dd9WEoXyg@mail.gmail.com>
 <AM0PR04MB4481B9A748A56F1D71DC2D1488000@AM0PR04MB4481.eurprd04.prod.outlook.com>
Message-ID: <CAOMZO5Bzd7=ZJ59FPPor0G0QwNnAg4_hCgw1qHjDXtYq_dO2tQ@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Peng,

On Tue, May 21, 2019 at 10:38 PM Peng Fan <peng.fan@nxp.com> wrote:

> > I will send a v2 removing CONFIG_SPL_DM.
>
> So what is the real direction moving to use SPL driver, non-dm is allowed in future?

We are very limited in space when CONFIG_SPL_DM is used on imx6q-sabresd.

With CONFIG_SPL_DM selected the size increase due to the three dtb's
is about 8kB.

Even with CONFIG_SPL_DM disabled we ony have 1kB of free space, so I
still want to optimize the size further.

Two options that I want also to remove are:

CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y

We are at -rc2 now, and I would really like to have mx6sabresd booting again.

Please check my v2 series and see if it looks good.

Thanks