From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 22 Jan 2020 14:46:44 -0300
Subject: [PATCH] imx: distinguish POR from POR+WDOG reset cause for first
 wd
In-Reply-To: <1579702656-20667-1-git-send-email-f.suligoi@asem.it>
References: <1579702656-20667-1-git-send-email-f.suligoi@asem.it>
Message-ID: <CAOMZO5C0DOvwDm42fJGt3hLwKHEjqDta-pkW3OjCCkpKRefJTA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Flavio,

On Wed, Jan 22, 2020 at 11:18 AM Flavio Suligoi <f.suligoi@asem.it> wrote:
>
> In some application the possibility to check if the reset
> is caused by a watchdog is essential, even if it occurs
> simultaneously with POR.
>
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
>  arch/arm/mach-imx/cpu.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
> index bfa85c6..ce0c663 100644
> --- a/arch/arm/mach-imx/cpu.c
> +++ b/arch/arm/mach-imx/cpu.c
> @@ -47,7 +47,6 @@ static char *get_reset_cause(void)
>  {
>         switch (get_imx_reset_cause()) {
>         case 0x00001:
> -       case 0x00011:
>                 return "POR";
>         case 0x00004:
>                 return "CSU";
> @@ -59,6 +58,12 @@ static char *get_reset_cause(void)
>  #else
>                 return "WDOG";
>  #endif
> +       case 0x00011:
> +#ifdef CONFIG_MX7
> +               return "POR + WDOG1";
> +#else
> +               return "POR + WDOG";
> +#endif
>         case 0x00020:
>                 return "JTAG HIGH-Z";
>         case 0x00040:

If I understand this correctly your board has a WDOG_B pin connected
to the PMIC and when WDOG_B is asserted the PMIC is power cycled and
the system resets via POR.

Is this correct? If not, please describe exactly your setup and what
you are trying to achieve.

It seems that the current behavior is correct for me.

Thanks