[PATCH v4 0/5] Enable wm8524 on i.MX8MQ-EVK

[PATCH v4 0/5] Enable wm8524 on i.MX8MQ-EVK

[Daniel Baluta]

On i.MX8MQ-EVK we can start the party using the wm8524 codec
which gets it's data through the SAI2 interface.

In order to make it work this patch series enables the SDMA nodes,
sets the correct pinctrl configuration and uses the simple card
machine driver to put everything together.

Changes since v3:
	- use "arm64: dts: imx8mq-evk" prefix for patches specific to 8MQ-EVK
	- squash together patches for setting up SAI (previous 3/5 and 4/5)
	- add back and document "fsl, imx8mq-sdma" compatbile string

Changes since v2:
        - s/QM/MQ after Chris comments

Changes since v1:
        - added cover letter
        - remove "fsl,imx8mq-sdma" compatible for sdma.

Daniel Baluta (5):
  arm64: dts: imx8mq: Add SDMA nodes
  bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string
  arm64: dts: imx8mq: Add SAI2 node
  arm64: dts: imx8mq-evk: Enable SAI2 node
  arm64: dts: imx8mq-evk: Enable wm8524 codec

 .../devicetree/bindings/dma/fsl-imx-sdma.txt  |  1 +
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 48 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 38 +++++++++++++++
 3 files changed, 87 insertions(+)

-- 
2.17.1

[PATCH v4 0/5] Enable wm8524 on i.MX8MQ-EVK

[Daniel Baluta]

On i.MX8MQ-EVK we can start the party using the wm8524 codec
which gets it's data through the SAI2 interface.

In order to make it work this patch series enables the SDMA nodes,
sets the correct pinctrl configuration and uses the simple card
machine driver to put everything together.

Changes since v3:
	- use "arm64: dts: imx8mq-evk" prefix for patches specific to 8MQ-EVK
	- squash together patches for setting up SAI (previous 3/5 and 4/5)
	- add back and document "fsl, imx8mq-sdma" compatbile string

Changes since v2:
        - s/QM/MQ after Chris comments

Changes since v1:
        - added cover letter
        - remove "fsl,imx8mq-sdma" compatible for sdma.

Daniel Baluta (5):
  arm64: dts: imx8mq: Add SDMA nodes
  bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string
  arm64: dts: imx8mq: Add SAI2 node
  arm64: dts: imx8mq-evk: Enable SAI2 node
  arm64: dts: imx8mq-evk: Enable wm8524 codec

 .../devicetree/bindings/dma/fsl-imx-sdma.txt  |  1 +
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 48 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 38 +++++++++++++++
 3 files changed, 87 insertions(+)

-- 
2.17.1

[PATCH v4 0/5] Enable wm8524 on i.MX8MQ-EVK

[Daniel Baluta]

On i.MX8MQ-EVK we can start the party using the wm8524 codec
which gets it's data through the SAI2 interface.

In order to make it work this patch series enables the SDMA nodes,
sets the correct pinctrl configuration and uses the simple card
machine driver to put everything together.

Changes since v3:
	- use "arm64: dts: imx8mq-evk" prefix for patches specific to 8MQ-EVK
	- squash together patches for setting up SAI (previous 3/5 and 4/5)
	- add back and document "fsl, imx8mq-sdma" compatbile string

Changes since v2:
        - s/QM/MQ after Chris comments

Changes since v1:
        - added cover letter
        - remove "fsl,imx8mq-sdma" compatible for sdma.

Daniel Baluta (5):
  arm64: dts: imx8mq: Add SDMA nodes
  bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string
  arm64: dts: imx8mq: Add SAI2 node
  arm64: dts: imx8mq-evk: Enable SAI2 node
  arm64: dts: imx8mq-evk: Enable wm8524 codec

 .../devicetree/bindings/dma/fsl-imx-sdma.txt  |  1 +
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 48 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 38 +++++++++++++++
 3 files changed, 87 insertions(+)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 1/5] arm64: dts: imx8mq: Add SDMA nodes

[Daniel Baluta]

SDMA1 is part of AIPS-3 region and SDMA2 is part
of AIPS-1 region.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[initial submit in i.MX internal tree]
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
[adaptation for linux-next]
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4784eb..9d48450453fb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -234,6 +234,17 @@
 				status = "disabled";
 			};
 
+			sdma2: sdma@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			iomuxc: iomuxc@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -575,6 +586,17 @@
 				status = "disabled";
 			};
 
+			sdma1: sdma@30bd0000 {
+				compatible = "fsl, imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			fec1: ethernet@30be0000 {
 				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
-- 
2.17.1

[PATCH v4 1/5] arm64: dts: imx8mq: Add SDMA nodes

[Daniel Baluta]

SDMA1 is part of AIPS-3 region and SDMA2 is part
of AIPS-1 region.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[initial submit in i.MX internal tree]
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
[adaptation for linux-next]
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4784eb..9d48450453fb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -234,6 +234,17 @@
 				status = "disabled";
 			};
 
+			sdma2: sdma@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			iomuxc: iomuxc@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -575,6 +586,17 @@
 				status = "disabled";
 			};
 
+			sdma1: sdma@30bd0000 {
+				compatible = "fsl, imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			fec1: ethernet@30be0000 {
 				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
-- 
2.17.1

[PATCH v4 1/5] arm64: dts: imx8mq: Add SDMA nodes

[Daniel Baluta]

SDMA1 is part of AIPS-3 region and SDMA2 is part
of AIPS-1 region.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[initial submit in i.MX internal tree]
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
[adaptation for linux-next]
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9155bd4784eb..9d48450453fb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -234,6 +234,17 @@
 				status = "disabled";
 			};
 
+			sdma2: sdma@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			iomuxc: iomuxc@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -575,6 +586,17 @@
 				status = "disabled";
 			};
 
+			sdma1: sdma@30bd0000 {
+				compatible = "fsl, imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			fec1: ethernet@30be0000 {
 				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 2/5] bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string

[Daniel Baluta]

Add imx8mq sdma support.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 3c9a57a8443b..9d8bbac27d8b 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
   firmware.
-- 
2.17.1

[PATCH v4 2/5] bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string

[Daniel Baluta]

Add imx8mq sdma support.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 3c9a57a8443b..9d8bbac27d8b 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
   firmware.
-- 
2.17.1

[PATCH v4 2/5] bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string

[Daniel Baluta]

Add imx8mq sdma support.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 3c9a57a8443b..9d8bbac27d8b 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
+      "fsl,imx8mq-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
   firmware.
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Daniel Baluta]

SAI2 is part of AIPS-3 memory region.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9d48450453fb..565f4175e73b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -489,6 +489,22 @@
 				status = "disabled";
 			};
 
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai",
+					     "fsl,imx6sx-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_DUMMY>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
 				reg = <0x30a20000 0x10000>;
-- 
2.17.1

[PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Daniel Baluta]

SAI2 is part of AIPS-3 memory region.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9d48450453fb..565f4175e73b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -489,6 +489,22 @@
 				status = "disabled";
 			};
 
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai",
+					     "fsl,imx6sx-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_DUMMY>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
 				reg = <0x30a20000 0x10000>;
-- 
2.17.1

[PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Daniel Baluta]

SAI2 is part of AIPS-3 memory region.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 9d48450453fb..565f4175e73b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -489,6 +489,22 @@
 				status = "disabled";
 			};
 
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai",
+					     "fsl,imx6sx-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_DUMMY>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
 				reg = <0x30a20000 0x10000>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 4/5] arm64: dts: imx8mq-evk: Enable SAI2 node

[Daniel Baluta]

This sets up clock hierarchy and pin configuration.

Use PLL1 to derive a proper rate for playing files
with a rate multiple of 8000.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf1772f..58de4a3d6029 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -52,6 +52,15 @@
 	};
 };
 
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -223,6 +232,16 @@
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
-- 
2.17.1

[PATCH v4 4/5] arm64: dts: imx8mq-evk: Enable SAI2 node

[Daniel Baluta]

This sets up clock hierarchy and pin configuration.

Use PLL1 to derive a proper rate for playing files
with a rate multiple of 8000.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf1772f..58de4a3d6029 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -52,6 +52,15 @@
 	};
 };
 
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -223,6 +232,16 @@
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
-- 
2.17.1

[PATCH v4 4/5] arm64: dts: imx8mq-evk: Enable SAI2 node

[Daniel Baluta]

This sets up clock hierarchy and pin configuration.

Use PLL1 to derive a proper rate for playing files
with a rate multiple of 8000.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf1772f..58de4a3d6029 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -52,6 +52,15 @@
 	};
 };
 
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -223,6 +232,16 @@
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

This uses simple-audio-card machine driver adding 1 CPU DAI
and 1 Codec DAI.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 58de4a3d6029..77f590c13ee0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,35 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	wm8524: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		};
+	};
 };
 
 &fec1 {
-- 
2.17.1

[PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

This uses simple-audio-card machine driver adding 1 CPU DAI
and 1 Codec DAI.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 58de4a3d6029..77f590c13ee0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,35 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	wm8524: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		};
+	};
 };
 
 &fec1 {
-- 
2.17.1

[PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

This uses simple-audio-card machine driver adding 1 CPU DAI
and 1 Codec DAI.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 58de4a3d6029..77f590c13ee0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,35 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	wm8524: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		};
+	};
 };
 
 &fec1 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 2/5] bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string

[Rob Herring]

On Wed, 27 Feb 2019 06:38:11 +0000, Daniel Baluta wrote:
> Add imx8mq sdma support.
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/5] bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string

[Rob Herring]

On Wed, 27 Feb 2019 06:38:11 +0000, Daniel Baluta wrote:
> Add imx8mq sdma support.
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/5] bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string

[Rob Herring]

On Wed, 27 Feb 2019 06:38:11 +0000, Daniel Baluta wrote:
> Add imx8mq sdma support.
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 1/5] arm64: dts: imx8mq: Add SDMA nodes

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> SDMA1 is part of AIPS-3 region and SDMA2 is part
> of AIPS-1 region.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> [initial submit in i.MX internal tree]
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> [adaptation for linux-next]

Reviewed-by: Fabio Estevam <festevam@gmail.com>

Re: [PATCH v4 1/5] arm64: dts: imx8mq: Add SDMA nodes

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> SDMA1 is part of AIPS-3 region and SDMA2 is part
> of AIPS-1 region.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> [initial submit in i.MX internal tree]
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> [adaptation for linux-next]

Reviewed-by: Fabio Estevam <festevam@gmail.com>

Re: [PATCH v4 1/5] arm64: dts: imx8mq: Add SDMA nodes

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> SDMA1 is part of AIPS-3 region and SDMA2 is part
> of AIPS-1 region.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> [initial submit in i.MX internal tree]
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> [adaptation for linux-next]

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:

> +                       sai2: sai@308b0000 {
> +                               #sound-dai-cells = <0>;
> +                               compatible = "fsl,imx8mq-sai",
> +                                            "fsl,imx6sx-sai";
> +                               reg = <0x308b0000 0x10000>;
> +                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +                               clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
> +                                        <&clk IMX8MQ_CLK_DUMMY>,
> +                                        <&clk IMX8MQ_CLK_SAI2_ROOT>,
> +                                        <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> +                               clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";

mclk0 is not a valid entry as per the binding doc.

Re: [PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:

> +                       sai2: sai@308b0000 {
> +                               #sound-dai-cells = <0>;
> +                               compatible = "fsl,imx8mq-sai",
> +                                            "fsl,imx6sx-sai";
> +                               reg = <0x308b0000 0x10000>;
> +                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +                               clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
> +                                        <&clk IMX8MQ_CLK_DUMMY>,
> +                                        <&clk IMX8MQ_CLK_SAI2_ROOT>,
> +                                        <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> +                               clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";

mclk0 is not a valid entry as per the binding doc.

Re: [PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:

> +                       sai2: sai@308b0000 {
> +                               #sound-dai-cells = <0>;
> +                               compatible = "fsl,imx8mq-sai",
> +                                            "fsl,imx6sx-sai";
> +                               reg = <0x308b0000 0x10000>;
> +                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +                               clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
> +                                        <&clk IMX8MQ_CLK_DUMMY>,
> +                                        <&clk IMX8MQ_CLK_SAI2_ROOT>,
> +                                        <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> +                               clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";

mclk0 is not a valid entry as per the binding doc.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:

> +
> +       wm8524: audio-codec-0 {

This -0 is not needed as we have a single codec on this board.

> +               #sound-dai-cells = <0>;
> +               compatible = "wlf,wm8524";
> +               clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> +               clock-names = "mclk";

The clocks and clock-names properties can be removed, right?

I don't see them defined in the binding doc and the codec driver does
not call clk_get(), so there is a mismatch.

Also, I still think this one and the previous patch could be made into
a single patch that adds audio support for the board.

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:

> +
> +       wm8524: audio-codec-0 {

This -0 is not needed as we have a single codec on this board.

> +               #sound-dai-cells = <0>;
> +               compatible = "wlf,wm8524";
> +               clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> +               clock-names = "mclk";

The clocks and clock-names properties can be removed, right?

I don't see them defined in the binding doc and the codec driver does
not call clk_get(), so there is a mismatch.

Also, I still think this one and the previous patch could be made into
a single patch that adds audio support for the board.

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Fabio Estevam]

On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:

> +
> +       wm8524: audio-codec-0 {

This -0 is not needed as we have a single codec on this board.

> +               #sound-dai-cells = <0>;
> +               compatible = "wlf,wm8524";
> +               clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> +               clock-names = "mclk";

The clocks and clock-names properties can be removed, right?

I don't see them defined in the binding doc and the codec driver does
not call clk_get(), so there is a mismatch.

Also, I still think this one and the previous patch could be made into
a single patch that adds audio support for the board.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Daniel Baluta]

On Thu, Feb 28, 2019 at 8:49 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> > +                       sai2: sai@308b0000 {
> > +                               #sound-dai-cells = <0>;
> > +                               compatible = "fsl,imx8mq-sai",
> > +                                            "fsl,imx6sx-sai";
> > +                               reg = <0x308b0000 0x10000>;
> > +                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > +                               clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
> > +                                        <&clk IMX8MQ_CLK_DUMMY>,
> > +                                        <&clk IMX8MQ_CLK_SAI2_ROOT>,
> > +                                        <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> > +                               clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
>
> mclk0 is not a valid entry as per the binding doc.

Indeed, will fix in next version. mclk0 is valid in our internal tree
because fsl_sai.c supports it.
Will remove mclk0 for now and re-add it when I will upstream the SAI patch.

Thanks Fabio for review!

Re: [PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Daniel Baluta]

On Thu, Feb 28, 2019 at 8:49 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> > +                       sai2: sai@308b0000 {
> > +                               #sound-dai-cells = <0>;
> > +                               compatible = "fsl,imx8mq-sai",
> > +                                            "fsl,imx6sx-sai";
> > +                               reg = <0x308b0000 0x10000>;
> > +                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > +                               clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
> > +                                        <&clk IMX8MQ_CLK_DUMMY>,
> > +                                        <&clk IMX8MQ_CLK_SAI2_ROOT>,
> > +                                        <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> > +                               clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
>
> mclk0 is not a valid entry as per the binding doc.

Indeed, will fix in next version. mclk0 is valid in our internal tree
because fsl_sai.c supports it.
Will remove mclk0 for now and re-add it when I will upstream the SAI patch.

Thanks Fabio for review!

Re: [PATCH v4 3/5] arm64: dts: imx8mq: Add SAI2 node

[Daniel Baluta]

On Thu, Feb 28, 2019 at 8:49 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> > +                       sai2: sai@308b0000 {
> > +                               #sound-dai-cells = <0>;
> > +                               compatible = "fsl,imx8mq-sai",
> > +                                            "fsl,imx6sx-sai";
> > +                               reg = <0x308b0000 0x10000>;
> > +                               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > +                               clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
> > +                                        <&clk IMX8MQ_CLK_DUMMY>,
> > +                                        <&clk IMX8MQ_CLK_SAI2_ROOT>,
> > +                                        <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> > +                               clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
>
> mclk0 is not a valid entry as per the binding doc.

Indeed, will fix in next version. mclk0 is valid in our internal tree
because fsl_sai.c supports it.
Will remove mclk0 for now and re-add it when I will upstream the SAI patch.

Thanks Fabio for review!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

On Thu, Feb 28, 2019 at 11:09 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> > +
> > +       wm8524: audio-codec-0 {
>
> This -0 is not needed as we have a single codec on this board.

Ok, will fix.

>
> > +               #sound-dai-cells = <0>;
> > +               compatible = "wlf,wm8524";
> > +               clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > +               clock-names = "mclk";
>
> The clocks and clock-names properties can be removed, right?
>
> I don't see them defined in the binding doc and the codec driver does
> not call clk_get(), so there is a mismatch.

They are used by simple-card.c machine driver.

asoc_simple_card_parse_clk
-> /* Parse dai->sysclk come from "clocks = <&xxx>" */
clk = devm_get_clk_from_child(dev, node, NULL);

>
> Also, I still think this one and the previous patch could be made into
> a single patch that adds audio support for the board.

Ok.

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

On Thu, Feb 28, 2019 at 11:09 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> > +
> > +       wm8524: audio-codec-0 {
>
> This -0 is not needed as we have a single codec on this board.

Ok, will fix.

>
> > +               #sound-dai-cells = <0>;
> > +               compatible = "wlf,wm8524";
> > +               clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > +               clock-names = "mclk";
>
> The clocks and clock-names properties can be removed, right?
>
> I don't see them defined in the binding doc and the codec driver does
> not call clk_get(), so there is a mismatch.

They are used by simple-card.c machine driver.

asoc_simple_card_parse_clk
-> /* Parse dai->sysclk come from "clocks = <&xxx>" */
clk = devm_get_clk_from_child(dev, node, NULL);

>
> Also, I still think this one and the previous patch could be made into
> a single patch that adds audio support for the board.

Ok.

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

On Thu, Feb 28, 2019 at 11:09 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> On Wed, Feb 27, 2019 at 3:38 AM Daniel Baluta <daniel.baluta@nxp.com> wrote:
>
> > +
> > +       wm8524: audio-codec-0 {
>
> This -0 is not needed as we have a single codec on this board.

Ok, will fix.

>
> > +               #sound-dai-cells = <0>;
> > +               compatible = "wlf,wm8524";
> > +               clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
> > +               clock-names = "mclk";
>
> The clocks and clock-names properties can be removed, right?
>
> I don't see them defined in the binding doc and the codec driver does
> not call clk_get(), so there is a mismatch.

They are used by simple-card.c machine driver.

asoc_simple_card_parse_clk
-> /* Parse dai->sysclk come from "clocks = <&xxx>" */
clk = devm_get_clk_from_child(dev, node, NULL);

>
> Also, I still think this one and the previous patch could be made into
> a single patch that adds audio support for the board.

Ok.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Fabio Estevam]

Hi Daniel,

On Fri, Mar 1, 2019 at 12:53 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:

> They are used by simple-card.c machine driver.
>
> asoc_simple_card_parse_clk
> -> /* Parse dai->sysclk come from "clocks = <&xxx>" */
> clk = devm_get_clk_from_child(dev, node, NULL);

The simple-card looks for the "clocks" properties inside the
simple-card node, not inside the codec node, right?

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Fabio Estevam]

Hi Daniel,

On Fri, Mar 1, 2019 at 12:53 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:

> They are used by simple-card.c machine driver.
>
> asoc_simple_card_parse_clk
> -> /* Parse dai->sysclk come from "clocks = <&xxx>" */
> clk = devm_get_clk_from_child(dev, node, NULL);

The simple-card looks for the "clocks" properties inside the
simple-card node, not inside the codec node, right?

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Fabio Estevam]

Hi Daniel,

On Fri, Mar 1, 2019 at 12:53 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:

> They are used by simple-card.c machine driver.
>
> asoc_simple_card_parse_clk
> -> /* Parse dai->sysclk come from "clocks = <&xxx>" */
> clk = devm_get_clk_from_child(dev, node, NULL);

The simple-card looks for the "clocks" properties inside the
simple-card node, not inside the codec node, right?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

On Fri, Mar 8, 2019 at 12:32 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Daniel,
>
> On Fri, Mar 1, 2019 at 12:53 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:
>
> > They are used by simple-card.c machine driver.
> >
> > asoc_simple_card_parse_clk
> > -> /* Parse dai->sysclk come from "clocks = <&xxx>" */
> > clk = devm_get_clk_from_child(dev, node, NULL);
>
> The simple-card looks for the "clocks" properties inside the
> simple-card node, not inside the codec node, right?

I see your point now.

Indeed, "clocks" properties is the one inside simple-card.

   sound-wm8524 {
               compatible = "simple-audio-card";
               link_codec: simple-audio-card,codec {
                       sound-dai = <&wm8524>;
                       clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;

Will remove them from  wm8524: audio-codec node because
they are useless there.

thanks,
Daniel.

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

On Fri, Mar 8, 2019 at 12:32 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Daniel,
>
> On Fri, Mar 1, 2019 at 12:53 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:
>
> > They are used by simple-card.c machine driver.
> >
> > asoc_simple_card_parse_clk
> > -> /* Parse dai->sysclk come from "clocks = <&xxx>" */
> > clk = devm_get_clk_from_child(dev, node, NULL);
>
> The simple-card looks for the "clocks" properties inside the
> simple-card node, not inside the codec node, right?

I see your point now.

Indeed, "clocks" properties is the one inside simple-card.

   sound-wm8524 {
               compatible = "simple-audio-card";
               link_codec: simple-audio-card,codec {
                       sound-dai = <&wm8524>;
                       clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;

Will remove them from  wm8524: audio-codec node because
they are useless there.

thanks,
Daniel.

Re: [PATCH v4 5/5] arm64: dts: imx8mq-evk: Enable wm8524 codec

[Daniel Baluta]

On Fri, Mar 8, 2019 at 12:32 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Daniel,
>
> On Fri, Mar 1, 2019 at 12:53 PM Daniel Baluta <daniel.baluta@gmail.com> wrote:
>
> > They are used by simple-card.c machine driver.
> >
> > asoc_simple_card_parse_clk
> > -> /* Parse dai->sysclk come from "clocks = <&xxx>" */
> > clk = devm_get_clk_from_child(dev, node, NULL);
>
> The simple-card looks for the "clocks" properties inside the
> simple-card node, not inside the codec node, right?

I see your point now.

Indeed, "clocks" properties is the one inside simple-card.

   sound-wm8524 {
               compatible = "simple-audio-card";
               link_codec: simple-audio-card,codec {
                       sound-dai = <&wm8524>;
                       clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;

Will remove them from  wm8524: audio-codec node because
they are useless there.

thanks,
Daniel.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel