From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Mon, 11 May 2020 09:09:27 -0300 Subject: [PATCH V2 1/2] imx: imx8mp_evk: fix boot issue In-Reply-To: <20200511071830.10493-1-peng.fan@nxp.com> References: <20200511071830.10493-1-peng.fan@nxp.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Peng, On Mon, May 11, 2020 at 3:55 AM Peng Fan wrote: > > The u-boot-spl.bin pad with ddr firmware conflicts with the > CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten > by malloc in SPL stage and cause ddr initialization not able > to finish. So update the related addresses to fix the issue. > > Reported-by: Fabio Estevam > Signed-off-by: Peng Fan It does allow to boot U-Boot, but 'reset' is broken: U-Boot 2020.07-rc1-00001-gaedb60e072-dirty (May 11 2020 - 09:01:16 -0300) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> reset resetting ... "Synchronous Abort" handler, esr 0x5e000000 elr: 000000004020011c lr : 00000000402001a8 (reloc) elr: 00000000fff6311c lr : 00000000fff631a8 x0 : 0000000084000009 x1 : 0000000000000000 x2 : 0000000000000000 x3 : 0000000000000000 x4 : 0000000000000000 x5 : 0000000000000000 x6 : 0000000000000000 x7 : 0000000000000000 x8 : 00000000fdf5e0b0 x9 : 000000000000000c x10: 00000000000008d4 x11: 00000000fdf5dbfc x12: 00000000000008b5 x13: 0000000000003908 x14: 00000000fdf5dfa8 x15: 0000000000000002 x16: 0000000000001080 x17: 0000000000004190 x18: 00000000fdf62dd0 x19: 00000000ffffffda x20: 0000000000000001 x21: 0000000000000000 x22: 00000000fdf71680 x23: 0000000000000001 x24: 00000000fffdf924 x25: 0000000000000000 x26: 0000000000000000 x27: 0000000000000000 x28: 00000000fdf716c0 x29: 00000000fdf5dd90 Code: d65f03c0 17ffffc7 ffffffff d4000003 (f94003e4) Resetting CPU ... Also, could you please make sure it can boot a NXP 5.4.3_2.0.0 kernel? Thanks