From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 18 Oct 2017 15:35:08 -0200
Subject: [U-Boot] [RFC] mmc: fsl_esdhc: Do not set high speed mode on
 MX25 and MX51
In-Reply-To: <7c61d168-eb4d-6d5c-cc19-60554424a2f1@wsystem.com>
References: <1508342223-12334-1-git-send-email-fabio.estevam@nxp.com>
 <68ea75a2-323c-ba3b-5332-eccc9885f977@wsystem.com>
 <CAOMZO5A449RS4FTfM+QM9Gq7PjhUdv4h-NdSiwA6ysAAZNtv6Q@mail.gmail.com>
 <7c61d168-eb4d-6d5c-cc19-60554424a2f1@wsystem.com>
Message-ID: <CAOMZO5Ceu7sKiZvrh-r_JhgoQBNWo+cYJHq-SpG5wnSY5L3eJA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de

Hi Benoît ,

On Wed, Oct 18, 2017 at 2:56 PM, Benoît Thébaudeau <benoit@wsystem.com> wrote:

> I can tell you what to use for imx25pdk if you give me the pads used by the
> eSDHC instance in question here.

mx25pdk uses the POR default IOMUX settings for sdhc1:

static const iomux_v3_cfg_t sdhc1_pads[] = {
NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
};

Regards,

Fabio Estevam