All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: Philippe Schenker <dev@pschenker.ch>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Max Krummenacher <max.krummenacher@toradex.com>,
	Stefan Agner <stefan@agner.ch>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>
Subject: Re: [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards
Date: Tue, 30 Jul 2019 17:46:28 -0300	[thread overview]
Message-ID: <CAOMZO5DRi6yawn3RF-Mouiejz0nc7htdsCjOBC_EXZZKUZ3nvA@mail.gmail.com> (raw)
In-Reply-To: <20190730144649.19022-13-dev@pschenker.ch>

On Tue, Jul 30, 2019 at 11:57 AM Philippe Schenker <dev@pschenker.ch> wrote:

> +       /* Atmel maxtouch controller */
> +       atmel_mxt_ts: atmel_mxt_ts@4a {

Generic node names, please:

touchscreen@4a

> +               compatible = "atmel,maxtouch";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_pcap_1>;
> +               reg = <0x4a>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */
> +               reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */
> +               status = "disabled";
> +       };
> +
> +       /*
> +        * the PCAPs use SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm1,
> +        * pwm4. So if you enable one of the PCAP controllers disable the pwms.
> +        */
> +       pcap: pcap@10 {

touchscreen@10

> +               /* TouchRevolution Fusion 7 and 10 multi-touch controller */
> +               compatible = "touchrevolution,fusion-f0710a";

I do not find this binding documented.

WARNING: multiple messages have this Message-ID (diff)
From: Fabio Estevam <festevam@gmail.com>
To: Philippe Schenker <dev@pschenker.ch>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	Stefan Agner <stefan@agner.ch>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Rob Herring <robh+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Max Krummenacher <max.krummenacher@toradex.com>,
	Shawn Guo <shawnguo@kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards
Date: Tue, 30 Jul 2019 17:46:28 -0300	[thread overview]
Message-ID: <CAOMZO5DRi6yawn3RF-Mouiejz0nc7htdsCjOBC_EXZZKUZ3nvA@mail.gmail.com> (raw)
In-Reply-To: <20190730144649.19022-13-dev@pschenker.ch>

On Tue, Jul 30, 2019 at 11:57 AM Philippe Schenker <dev@pschenker.ch> wrote:

> +       /* Atmel maxtouch controller */
> +       atmel_mxt_ts: atmel_mxt_ts@4a {

Generic node names, please:

touchscreen@4a

> +               compatible = "atmel,maxtouch";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_pcap_1>;
> +               reg = <0x4a>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */
> +               reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */
> +               status = "disabled";
> +       };
> +
> +       /*
> +        * the PCAPs use SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm1,
> +        * pwm4. So if you enable one of the PCAP controllers disable the pwms.
> +        */
> +       pcap: pcap@10 {

touchscreen@10

> +               /* TouchRevolution Fusion 7 and 10 multi-touch controller */
> +               compatible = "touchrevolution,fusion-f0710a";

I do not find this binding documented.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-07-30 20:46 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-30 14:46 [PATCH 00/22] This patchset holds some common changes that were never upstreamed Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 01/22] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 02/22] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 03/22] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 04/22] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 05/22] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 06/22] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 07/22] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 08/22] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 09/22] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 10/22] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 11/22] ARM: dts: imx6: Add sleep state to can interfaces Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-31  7:14   ` Michal Vokáč
2019-07-31  7:14     ` Michal Vokáč
2019-07-31 11:13     ` Philippe Schenker
2019-07-31 11:13       ` Philippe Schenker
2019-07-31 11:13       ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 12/22] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 20:46   ` Fabio Estevam [this message]
2019-07-30 20:46     ` Fabio Estevam
2019-07-30 20:46     ` Fabio Estevam
2019-07-31  6:43     ` Philippe Schenker
2019-07-31  6:43       ` Philippe Schenker
2019-07-31  6:43       ` Philippe Schenker
2019-07-31  6:54       ` Michal Vokáč
2019-07-31  6:54         ` Michal Vokáč
2019-07-31  6:54         ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 13/22] ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-31  7:09   ` Michal Vokáč
2019-07-31  7:09     ` Michal Vokáč
2019-07-30 14:46 ` [PATCH 14/22] ARM: dts: apalis-imx6: Add some example I2C devices Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 20:53   ` Fabio Estevam
2019-07-30 20:53     ` Fabio Estevam
2019-07-30 20:53     ` Fabio Estevam
2019-07-31 11:36     ` Philippe Schenker
2019-07-31 11:36       ` Philippe Schenker
2019-07-31 11:36       ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 15/22] ARM: dts: apalis-imx6: Add some optional " Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 20:43   ` Fabio Estevam
2019-07-30 20:43     ` Fabio Estevam
2019-07-30 20:43     ` Fabio Estevam
2019-07-31 11:37     ` Philippe Schenker
2019-07-31 11:37       ` Philippe Schenker
2019-07-31 11:37       ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 16/22] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 17/22] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 18/22] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 19/22] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 20/22] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 21/22] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker
2019-07-30 14:46 ` [PATCH 22/22] ARM: dts: imx6ull-colibri: Add touchscreens used with Eval Board Philippe Schenker
2019-07-30 14:46   ` Philippe Schenker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAOMZO5DRi6yawn3RF-Mouiejz0nc7htdsCjOBC_EXZZKUZ3nvA@mail.gmail.com \
    --to=festevam@gmail.com \
    --cc=dev@pschenker.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mark.rutland@arm.com \
    --cc=max.krummenacher@toradex.com \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.